Matter-wave interferometry is highly susceptible to inertial acceleration noises arising from the vibration of the experimental apparatus. There are various methods for noise suppression. In this paper, we propose leveraging the cross-correlation of multi-directional vibration noises to mitigate their dephasing effect in matter-wave interferometers. Specifically, we analyse an interferometer driven by its internal state under an external field and examine the dephasing caused by a two-dimensional random inertial force. As we will demonstrate, the coupling between the two-dimensional inertial force noise components will shift the resonance peak but not change the shape of the power spectral density. Moreover, when the noise approximately resonates with the intrinsic frequency of the test mass, we find that the standard deviation of the phase can be suppressed by a factor roughly equal to the Q-factor of the noise. This technique holds significant potential for future gravity experiments utilising quantum sensors, such as measuring gravitational acceleration and exploring quantum entanglement induced by gravity.
Matter-wave interferometry is highly susceptible to inertial acceleration noises arising from the vibration of the experimental apparatus. There are various methods for noise suppression. In this paper, we propose leveraging the cross-correlation of multi-directional vibration noises to mitigate their dephasing effect in matter-wave interferometers. Specifically, we analyse an interferometer driven by its internal state under an external field and examine the dephasing caused by a two-dimensional random inertial force. As we will demonstrate, the coupling between the two-dimensional inertial force noise components will shift the resonance peak but not change the shape of the power spectral density. Moreover, when the noise approximately resonates with the intrinsic frequency of the test mass, we find that the standard deviation of the phase can be suppressed by a factor roughly equal to the Q-factor of the noise. This technique holds significant potential for future gravity experiments utilising quantum sensors, such as measuring gravitational acceleration and exploring quantum entanglement induced by gravity.
Matter-wave interferometry is highly susceptible to inertial acceleration noises arising from the vibration of the experimental apparatus. There are various methods for noise suppression. In this paper, we propose leveraging the cross-correlation of multidirectional vibration noises to mitigate their dephasing effect in matter-wave interferometers. Specifically, we analyze an interferometer driven by its internal state under an external field and examine the dephasing caused by a two-dimensional random inertial force. As we will demonstrate, the coupling between the two-dimensional inertial force noise components will shift the resonance peak but not change the shape of the power spectral density. Moreover, when the noise approximately resonates with the intrinsic frequency of the test mass, we find that the standard deviation of the phase can be suppressed by a factor roughly equal to the Q factor of the noise. This technique holds significant potential for future gravity experiments utilizing quantum sensors, such as measuring gravitational acceleration and exploring quantum entanglement induced by gravity.
Matter-wave interferometry is susceptible to noninertial noise sources, which can induce dephasing and a resulting loss of interferometric visibility. Here, we focus on inertial torsion noise (ITN), which arises from the rotational motion of the experimental apparatus suspended by a thin wire and subject to random external torques. We provide analytical expressions for the ITN noise starting from generalized Langevin equations describing the experimental box, which can then be used together with the transfer function to obtain the dephasing factor. We verify the theoretical modeling and the validity of the approximations using Monte Carlo simulations, obtaining good agreement between theory and numerics. As an application, we estimate the size of the effects for the next generation of interferometry experiments with femtogram particles, which could be used as the building block for entanglement-based tests of the quantum nature of gravity. We find that the ambient gas is a weak source of ITN, posing mild restrictions on the ambient pressure and temperature. We discuss the general ITN constraints by assuming a Langevin equation parametrized by three phenomenological parameters.
Relative accelerations between a mass undergoing matter-wave interference and the associated apparatus, when not tracked, can appear as dephasing. It can be an important limiting factor in interferometry with large masses. Here we advocate taking conceptually the simplest solution: putting both the interfering mass and its associated apparatus in a freely falling capsule, so that the strongest inertial noise components vanish due to the equivalence principle. In this setting, we investigate two of the most important remaining noise sources: (a) the non-inertial jitter of the experimental setup which arises through gas collisions and photon scattering on the experimental apparatus as well as the walls of the enclosing capsule, and (b) the gravity-gradient noise, namely the fluctuating curvature change in a finite sized capsule arising from any untracked motion of external masses. We show that the former can be reduced below desired values by appropriate pressures and temperatures, while the latter can be fully mitigated in a controlled environment. We finally apply the analysis to a recent proposal for testing the quantum nature of gravity [S. Bose et. al. Phys. Rev. Lett 119, 240401 (2017)] through the entanglement of two masses undergoing interferometry. We show that the relevant entanglement witnessing is feasible in a freely falling capsule with achievable levels of relative acceleration noise.
Matter-wave interferometry is a striking quantum phenomenon that differs fundamentally from classical mechanics. In the quantum regime, matter behaves like a wave and can exist in spatial superpositions, allowing a single quantum object to move along multiple trajectories simultaneously. Similar to optical interferometers, such quantum matter systems act as interferometers themselves, with the differential phase that encodes information about external forces experienced during their evolution. This makes matter-wave interferometry a powerful platform for quantum sensing across various applications: (i) One of the most direct applications is precision measurement. Atomic interferometers can measure local acceleration and have already been implemented in devices such as accelerometers, seismometers, gravimeters, and gradiometers. (ii) Atomic interferometers are proposed as complementary tools for future gravitational-wave observatories, including ongoing projects MIGA, MAGIS-100, AION and ZAIGA. (iii) Matter-wave interferometry also offers a promising platform for probing quantum aspects of gravity. Numerous tabletop proposals aim to test quantum gravity models, investigate collapse mechanisms, study gravity-induced decoherence, and search for gravity-mediated quantum entanglement. The Stern-Gerlach interferometer (SGI) is a type of matter-wave interferometer that manipulates spatial superpositions using magnetic-field gradients. The witness of an SGI can be designed via its spin, enabling more precise measurements of the differential phase. Recent developments in atomic chip technology have enabled the generation of highly controlled magnetic fields on compact platforms, allowing for precise manipulation of spin states and making SGIs experimentally realizable. Robustness is a critical challenge for matter-wave interferometers. In real experiments, various sources of classical noises arise from mechanical vibrations, seismic motions, inertial forces, tidal forces, magnetic field fluctuations and so on. These noises can disturb the spin and spatial degrees of freedom of the test mass, resulting in witness loss of the interferometer. While spin decoherence is relatively well understood and can be formulated by the Bloch-Redfield master equation, the impact on spatial degrees of freedom still requires systematic investigation. This thesis therefore aims to explore witness loss in an SGI induced by stochastic noises acting on spatial degrees of freedom. As investigated by this thesis, the witness gets lost via several mechanisms: (i) Dephasing. The spatial phase is fluctuated by stochastic noise, resulting in a random phase factor eiδϕ, whose ensemble average contributes a decay factor e−Γ to the spin density matrix and leads to a loss of witness. As is demonstrated by the thesis, this decay factor is a linear response to the external noise, with a transfer function as the Fourier transform of the unperturbed classical trajectories. (ii) Humpty-Dumpty problem. The classical trajectories are also disturbed by stochastic noise, resulting in a non-closure problem of the interferometer, known as the Humpty-Dumpty problem. The resulting witness loss is usually characterized by the contrast of the final states ⟨ψ1|ψ2⟩, which equals the phase-space distance |α1 − α2|2 when the test mass is in coherent states. (iii) Position localization decoherence. Due to the randomness of the noise, the spatial wavefunction of the test mass is thus also stochastic, of which the ensemble average experiences decoherence characterized by the power spectrum density of external noise. However, as illustrated by this thesis, this type of decoherence does not affect spin-based witnesses in most practical scenarios. The general theoretical framework is mainly constructed in chapter 3 of this thesis. The subsequent chapters analyze several representative noise sources: (i) Gravitational and electrostatic noise. Molecules in the surrounding gas move randomly due to thermal motion, generating stochastic gravitational accelerations and electrostatic forces that can be expanded in multipole series. Since the random motion follows Maxwell’s distribution and approximately has a cylindrical symmetry, the resulting noise power spectrum density takes the form of Bessel functions. (ii) Inertial acceleration noise. The mechanical support of the experimental apparatus is always fluctuated by vibrational noise, resulting in random inertial force on the test mass. In practice, dephasing can be mitigated through destructive interference by introducing appropriate coupling between different directional components. (iii) Inertial torsion noise. In suspended experiments, the experimental apparatus is fluctuated by torsional noise, leading to another inertial noise on the test mass. The power spectrum density of the inertial torsion noise is formulated by the selfconvolution of the original noise, resulting in the peak frequencies that are doubled. Taken together, these analyses build a comprehensive picture of how stochastic noise affects the spatial dynamics of an SGI and leads to the loss of spin-based witnesses. Future work may include more realistic noise sources such as magnetic noise and trap-potential noise. These insights will be valuable for future experimental implementations, particularly in precision sensing for quantum gravity, where preserving coherence and maintaining reliable witness signals are essential.
Stern-Gerlach interferometer (SGI) is a kind of matter-wave interferometer driven by magnetic field and has been proposed for various gravity experiments. Stochastic noises can lead to decoherence problems of SGI via various mechanisms. In this paper, I will theoretically study several mechanisms including dephasing, contrast loss, and position localization decoherence. I will first present a rigorous proof that the dephasing behaves as a linear response to the noise, with a transfer function given by the Fourier transform of the unperturbed classical trajectories. Then I will demonstrate that stochastic acceleration noise only induces dephasing to the witness operator constructed in spin space, while it does not lead to contrast loss or position localization decoherence due to common mode cancellation. In contrast, higher-order noise can induce both contrast loss and position localization decoherence, contributing a decay factor proportional to the noise power spectrum density at the intrinsic frequency, which can be physically interpreted as the resonance between the noise and test mass. Based on the result, I apply the framework to analyze two typical noise sources, magnetic field noise and quadratic noise.
In this white paper, we highlight the importance of the (1−10Hz) frequency range for laboratory tests of the quantum nature of gravity using the quantum gravity-induced entanglement of masses (QGEM) protocol. QGEM requires matter-wave interferometers with masses (m∼10−15−10−14kg), brought within separations (d∼30−50μm), while maintaining spatial superpositions of (1−20μm) and coherence for (τ∼0.1−1s). These requirements make low-frequency environmental noise a central experimental challenge and place QGEM in a regime closely related to the low-frequency goals of the Einstein Telescope (ET) and the Cosmic Explorer (CE). In particular, QGEM is sensitive to relative acceleration noise (RAN) and to gravity-gradient noise (GGN) generated by seismic and other environmental mass-density fluctuations. For representative parameters m=10−14kg, Δx=10μm, and τ=1s, the differential acceleration-noise amplitude spectral density must be suppressed well below the 10−15ms−2/Hz level to keep acceleration-induced dephasing below the relevant experimental scale. Achieving this level of low-frequency noise suppression is therefore a key requirement for QGEM and closely parallels the seismic and gravity-gradient noise challenges that ET and CE address.