Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2506.15420

Error-detected coherence metrology of a dual-rail encoded fixed-frequency multimode superconducting qubit

James Wills, Mohammad Tasnimul Haque, Brian Vlastakis

Published Jun 18, 2025• 0 citations
arXivHTMLPDF

Abstract

Amplitude damping is a dominant source of error in high performance quantum processors. A promising approach in quantum error correction is erasure error conversion, where errors are converted into detectable leakage states. Dual-rail encoding has been shown as a candidate for the conversion of amplitude-damping errors; with unique sensitivities to noise and decoherence sources. Here we present a dual-rail encoding within a single fixed-frequency superconducting multimode transmon qubit. The three island, two junction device comprises two transmonlike modes with a detuning of 0.75-1 GHz, in a coaxial circuit QED architecture. We show the logical bit-flip and phase-flip error rates are more than one order of magnitude lower than the physical error rates, and demonstrate stability and repeatability of the architecture through an extended measurement of three such devices. Finally, we discuss how the error-detected subspace can be used for investigations into the fundamentals of noise and decoherence in fixed-frequency transmon qubits.

DOI
10.48550/arxiv.2506.15420

Related papers

Dual-rail encoding with superconducting cavities

James D. Teoh, Patrick Winkel, Harshvardhan K. Babla +15 more

The design of quantum hardware that reduces and mitigates errors is essential for practical quantum error correction (QEC) and useful quantum computation. To this end, we introduce the circuit-Quantum Electrodynamics (QED) dual-rail qubit in which our physical qubit is encoded in the single-photon subspace, [Formula: see text], of two superconducting microwave cavities. The dominant photon loss errors can be detected and converted into erasure errors, which are in general much easier to correct. In contrast to linear optics, a circuit-QED implementation of the dual-rail code offers unique capabilities. Using just one additional transmon ancilla per dual-rail qubit, we describe how to perform a gate-based set of universal operations that includes state preparation, logical readout, and parametrizable single and two-qubit gates. Moreover, first-order hardware errors in the cavities and the transmon can be detected and converted to erasure errors in all operations, leaving background Pauli errors that are orders of magnitude smaller. Hence, the dual-rail cavity qubit exhibits a favorable hierarchy of error rates and is expected to perform well below the relevant QEC thresholds with today's coherence times.

arXiv:2212.12077•Proceedings of the National Academy of Sciences•Oct 6, 2023•73 citations

Erasure Detection of a Dual-Rail Qubit Encoded in a Double-Post Superconducting Cavity

Akshay Koottandavida, Ioannis Tsioutsios, Aikaterini Kargioti +8 more

Qubits with predominantly erasure errors present distinctive advantages for quantum error correction (QEC) and fault-tolerant quantum computing. Logical qubits based on dual-rail encoding that exploit erasure detection have been recently proposed in superconducting circuit architectures, with either coupled transmons or cavities. Here, we implement a dual-rail qubit encoded in a compact, double-post superconducting cavity. Using an auxiliary transmon, we perform erasure detection on the dual-rail subspace. We characterize the behavior of the code space by a novel method to perform joint-Wigner tomography. This is based on modifying the cross-Kerr interaction between the cavity modes and the transmon. We measure an erasure rate of 3.981±0.003 (ms)^{-1} and a residual, postselected dephasing error rate up to 0.17 (ms)^{-1} within the code space. This strong hierarchy of error rates, together with the compact and hardware-efficient nature of this novel architecture, holds promise in realizing QEC schemes with enhanced thresholds and improved scaling.

arXiv:2311.04423•Physical Review Letters•May 2, 2024•37 citations

Dynamical error reshaping for dual-rail erasure qubits

Filippos Dakis, Shruti Puri, Sophia E. Economou +1 more

Erasure qubits -- qubits designed to have an error profile that is dominated by detectable leakage errors -- are a promising way to cut down the resources needed for quantum error correction. There have been several recent experiments demonstrating erasure qubits in superconducting quantum processors, most notably the dual-rail qubit defined by the one-photon subspace of two coupled cavities. An outstanding challenge is that the ancillary transmons needed to facilitate erasure checks and two-qubit gates introduce a substantial amount of noise, limiting the benefits of working with erasure-biased qubits. Here, we show how to suppress the adverse effects of transmon-induced noise while performing erasure checks or two-qubit gates. We present control schemes for these operations that suppress erasure check errors by three orders of magnitude and reduce the logical two-qubit gate infidelities by up to three orders of magnitude.

arXiv:2510.08416•Oct 9, 2025•0 citations

Hardware-Efficient Erasure Qubits With Superconducting Transmon Qutrits

Bao-Jie Liu, Ying-Ying Wang, Yu-Xin Wang +3 more

Quantum error correction using erasure qubits offers higher fault-tolerant thresholds and improved scaling by converting dominant physical errors into detectable erasures. In superconducting circuits, erasure qubits can be constructed using the dual-rail approach, which, however, requires additional qubit-count overhead and tailored coupling elements. Here, we demonstrate a hardware-efficient scheme that operates transmon qutrits as erasure qubits, which is compatible with standard superconducting circuit-QED hardware. The logical states $\ket{0_\text{L}}$ and $\ket{1_\text{L}}$ are represented by the ground and second excited states, while the dominant relaxation errors can be detected via an ancilla qubit using a microwave-activated two-qutrit SWAP gate. We demonstrate a logical qubit $T_1$ lifetime exceeding $500\,μ\mathrm{s}$, post-selected with repeated mid-circuit erasure detection, which is ten times longer than the $T_1$ time of the transmon physical qubit. Coherence times beyond $300\,μ\mathrm{s}$ are achieved using dynamical decoupling. Single-qubit gate operations reach average Clifford gate infidelity on the order of $10^{-4}$. We further demonstrate dual-purposing an ancilla qubit for both erasure detection and parity checking, showing heralded generation of Bell states between erasure qubits. These results suggest that mainstream architectures of transmon qubit arrays may already be capable of implementing erasure-based QEC strategies for hardware-efficient fault-tolerant quantum computing.

quant-pharXiv:2604.08672•Apr 13, 2026•0 citations

Demonstrating a Long-Coherence Dual-Rail Erasure Qubit Using Tunable Transmons

Harry Levine, Arbel Haim, Jimmy S. C. Hung +97 more

Quantum error correction with erasure qubits promises significant advantages over standard error correction due to favorable thresholds for erasure errors. To realize this advantage in practice requires a qubit for which nearly all errors are such erasure errors, and the ability to check for erasure errors without dephasing the qubit. We demonstrate that a “dual-rail qubit” consisting of a pair of resonantly coupled transmons can form a highly coherent erasure qubit, where transmon T 1 errors are converted into erasure errors and residual dephasing is strongly suppressed, leading to millisecond-scale coherence within the qubit subspace. We show that single-qubit gates are limited primarily by erasure errors, with erasure probability p erasure = 2.19 ( 2 ) × 10 − 3 per gate while the residual errors are ∼ 40 times lower. We further demonstrate midcircuit detection of erasure errors while introducing < 0.1 % dephasing error per check. Finally, we show that the suppression of transmon noise allows this dual-rail qubit to preserve high coherence over a broad tunable operating range, offering an improved capacity to avoid frequency collisions. This work establishes transmon-based dual-rail qubits as an attractive building block for hardware-efficient quantum error correction. Published by the American Physical Society 2024

arXiv:2307.08737•Physical Review X•Mar 20, 2024•66 citations

Converting qubit relaxation into erasures with a single fluxonium

Chenlu Liu, Yulong Li, Jiahui Wang +9 more

Qubits that experience predominantly erasure errors offer distinct advantages for fault-tolerant operation. Indeed, dual-rail encoded erasure qubits in superconducting cavities and transmons have demonstrated high-fidelity operations by converting physical-qubit relaxation into logical-qubit erasures, but this comes at the cost of increased hardware overhead and circuit complexity. Here, we address these limitations by realizing erasure conversion in a single fluxonium operated at zero flux, where the logical state is encoded in its 0-2 subspace. A single, carefully engineered resonator provides both mid-circuit erasure detection and end-of-line (EOL) logical measurement. Post-selection on non-erasure outcomes results in more than four-fold increase of the logical lifetime, from $193~μ$s to $869~μ$s. Finally, we characterize measurement-induced logical dephasing as a function of measurement power and frequency, and infer that each erasure check contributes a negligible error of $7.2\times 10^{-5}$. These results establish integer-fluxonium as a promising, resource-efficient platform for erasure-based error mitigation, without requiring additional hardware.

quant-pharXiv:2601.11086•Jan 19, 2026•0 citations
Amplitude damping is a dominant source of error in high performance quantum processors. A promising approach in quantum error correction is erasure error conversion, where errors are converted into detectable leakage states. Dual-rail encoding has been shown as a candidate for the conversion of amplitude-damping errors; with unique sensitivities to noise and decoherence sources. Here we present a dual-rail encoding within a single fixed-frequency superconducting multimode transmon qubit. The three island, two junction device comprises two transmonlike modes with a detuning of 0.75-1 GHz, in a coaxial circuit QED architecture. We show the logical bit-flip and phase-flip error rates are more than one order of magnitude lower than the physical error rates, and demonstrate stability and repeatability of the architecture through an extended measurement of three such devices. Finally, we discuss how the error-detected subspace can be used for investigations into the fundamentals of noise and decoherence in fixed-frequency transmon qubits.
The design of quantum hardware that reduces and mitigates errors is essential for practical quantum error correction (QEC) and useful quantum computation. To this end, we introduce the circuit-Quantum Electrodynamics (QED) dual-rail qubit in which our physical qubit is encoded in the single-photon subspace, [Formula: see text], of two superconducting microwave cavities. The dominant photon loss errors can be detected and converted into erasure errors, which are in general much easier to correct. In contrast to linear optics, a circuit-QED implementation of the dual-rail code offers unique capabilities. Using just one additional transmon ancilla per dual-rail qubit, we describe how to perform a gate-based set of universal operations that includes state preparation, logical readout, and parametrizable single and two-qubit gates. Moreover, first-order hardware errors in the cavities and the transmon can be detected and converted to erasure errors in all operations, leaving background Pauli errors that are orders of magnitude smaller. Hence, the dual-rail cavity qubit exhibits a favorable hierarchy of error rates and is expected to perform well below the relevant QEC thresholds with today's coherence times.
Qubits with predominantly erasure errors present distinctive advantages for quantum error correction (QEC) and fault-tolerant quantum computing. Logical qubits based on dual-rail encoding that exploit erasure detection have been recently proposed in superconducting circuit architectures, with either coupled transmons or cavities. Here, we implement a dual-rail qubit encoded in a compact, double-post superconducting cavity. Using an auxiliary transmon, we perform erasure detection on the dual-rail subspace. We characterize the behavior of the code space by a novel method to perform joint-Wigner tomography. This is based on modifying the cross-Kerr interaction between the cavity modes and the transmon. We measure an erasure rate of 3.981±0.003 (ms)^{-1} and a residual, postselected dephasing error rate up to 0.17 (ms)^{-1} within the code space. This strong hierarchy of error rates, together with the compact and hardware-efficient nature of this novel architecture, holds promise in realizing QEC schemes with enhanced thresholds and improved scaling.
Erasure qubits -- qubits designed to have an error profile that is dominated by detectable leakage errors -- are a promising way to cut down the resources needed for quantum error correction. There have been several recent experiments demonstrating erasure qubits in superconducting quantum processors, most notably the dual-rail qubit defined by the one-photon subspace of two coupled cavities. An outstanding challenge is that the ancillary transmons needed to facilitate erasure checks and two-qubit gates introduce a substantial amount of noise, limiting the benefits of working with erasure-biased qubits. Here, we show how to suppress the adverse effects of transmon-induced noise while performing erasure checks or two-qubit gates. We present control schemes for these operations that suppress erasure check errors by three orders of magnitude and reduce the logical two-qubit gate infidelities by up to three orders of magnitude.
Quantum error correction using erasure qubits offers higher fault-tolerant thresholds and improved scaling by converting dominant physical errors into detectable erasures. In superconducting circuits, erasure qubits can be constructed using the dual-rail approach, which, however, requires additional qubit-count overhead and tailored coupling elements. Here, we demonstrate a hardware-efficient scheme that operates transmon qutrits as erasure qubits, which is compatible with standard superconducting circuit-QED hardware. The logical states ∣0L⟩\ket{0_\text{L}}∣0L​⟩ and ∣1L⟩\ket{1_\text{L}}∣1L​⟩ are represented by the ground and second excited states, while the dominant relaxation errors can be detected via an ancilla qubit using a microwave-activated two-qutrit SWAP gate. We demonstrate a logical qubit T1T_1T1​ lifetime exceeding 500 μs500\,μ\mathrm{s}500μs, post-selected with repeated mid-circuit erasure detection, which is ten times longer than the T1T_1T1​ time of the transmon physical qubit. Coherence times beyond 300 μs300\,μ\mathrm{s}300μs are achieved using dynamical decoupling. Single-qubit gate operations reach average Clifford gate infidelity on the order of 10−410^{-4}10−4. We further demonstrate dual-purposing an ancilla qubit for both erasure detection and parity checking, showing heralded generation of Bell states between erasure qubits. These results suggest that mainstream architectures of transmon qubit arrays may already be capable of implementing erasure-based QEC strategies for hardware-efficient fault-tolerant quantum computing.
Quantum error correction with erasure qubits promises significant advantages over standard error correction due to favorable thresholds for erasure errors. To realize this advantage in practice requires a qubit for which nearly all errors are such erasure errors, and the ability to check for erasure errors without dephasing the qubit. We demonstrate that a “dual-rail qubit” consisting of a pair of resonantly coupled transmons can form a highly coherent erasure qubit, where transmon T 1 errors are converted into erasure errors and residual dephasing is strongly suppressed, leading to millisecond-scale coherence within the qubit subspace. We show that single-qubit gates are limited primarily by erasure errors, with erasure probability p erasure = 2.19 ( 2 ) × 10 − 3 per gate while the residual errors are ∼ 40 times lower. We further demonstrate midcircuit detection of erasure errors while introducing < 0.1 % dephasing error per check. Finally, we show that the suppression of transmon noise allows this dual-rail qubit to preserve high coherence over a broad tunable operating range, offering an improved capacity to avoid frequency collisions. This work establishes transmon-based dual-rail qubits as an attractive building block for hardware-efficient quantum error correction. Published by the American Physical Society 2024
Qubits that experience predominantly erasure errors offer distinct advantages for fault-tolerant operation. Indeed, dual-rail encoded erasure qubits in superconducting cavities and transmons have demonstrated high-fidelity operations by converting physical-qubit relaxation into logical-qubit erasures, but this comes at the cost of increased hardware overhead and circuit complexity. Here, we address these limitations by realizing erasure conversion in a single fluxonium operated at zero flux, where the logical state is encoded in its 0-2 subspace. A single, carefully engineered resonator provides both mid-circuit erasure detection and end-of-line (EOL) logical measurement. Post-selection on non-erasure outcomes results in more than four-fold increase of the logical lifetime, from 193 μ193~μ193 μs to 869 μ869~μ869 μs. Finally, we characterize measurement-induced logical dephasing as a function of measurement power and frequency, and infer that each erasure check contributes a negligible error of 7.2×10−57.2\times 10^{-5}7.2×10−5. These results establish integer-fluxonium as a promising, resource-efficient platform for erasure-based error mitigation, without requiring additional hardware.