Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2506.14688

Breaking even with magic: demonstration of a high-fidelity logical non-Clifford gate

Shival Dasu, Burton, Simon, Karl Mayer, David Amaro, Justin A. Gerber, Kevin Gilmore, Dan Gresh, Davide DelVento, Andrew C. Potter, David Hayes

Published Jun 17, 2025• 1 citation
arXivHTMLPDF

Abstract

Encoding quantum information to protect it from errors is essential for performing large-scale quantum computations. Performing a universal set of quantum gates on encoded states demands a potentially large resource overhead and minimizing this overhead is key for the practical development of large-scale fault-tolerant quantum computers. We propose and experimentally implement a magic-state preparation protocol to fault-tolerantly prepare a pair of logical magic states in a [[6,2,2]] quantum error-detecting code using only eight physical qubits. Implementing this protocol on H1-1, a 20 qubit trapped-ion quantum processor, we prepare magic states with experimental infidelity $7^{+3}_{-1}\times 10^{-5}$ with a $14.8^{+1}_{-1}\%$ discard rate and use these to perform a fault-tolerant non-Clifford gate, the controlled-Hadamard (CH), with logical infidelity $\leq 2.3^{+9}_{-9}\times 10^{-4}$. Notably, this significantly outperforms the unencoded physical CH infidelity of $10^{-3}$. Through circuit-level stabilizer simulations, we show that this protocol can be self-concatenated to produce extremely high-fidelity magic states with low space-time overhead in a [[36,4,4]] quantum error correcting code, with logical error rates of $6\times 10^{-10}$ ($5\times 10^{-14}$) at two-qubit error rate of $10^{-3}$ ($10^{-4}$) respectively.

DOI
10.48550/arxiv.2506.14688

Related papers

Extremely Low-Cost Magic State Preparation toward Fault-Tolerant Quantum Computing

Jianshuo Gao, Xiao Yuan, Yuan Yao

Fault-tolerant preparation of non-Clifford resource states is a major contributor to the overhead of quantum computation, motivating protocols that achieve high output fidelity with minimal qubit and circuit costs. We introduce a low-cost magic-state preparation protocol in which the choice of stabilizer generators is co-designed with the flag gadgets, allowing the syndrome-extraction circuit itself to filter correlated faults across a non-Clifford layer. The protocol prepares a logical plus state in the 15-qubit quantum Reed-Muller code, applies a transversal T gate, and gauge-fixes the same register into the seven-qubit Steane code. By reorganizing equivalent Z-type stabilizer generators into jointly flagged measurement groups, the protocol eliminates all accepted logical-error contributions arising from one or two circuit faults under destructive error detection. Under a uniform circuit-level depolarizing noise model, the postselected infidelity is $210.2p^3+O(p^4)$. At $p=10^{-3}$, exact low-order enumeration combined with stratified sampling bounds the infidelity by $2.2\times10^{-7}$ at 99.9% joint confidence, while retaining an acceptance probability of 86.9%. The complete circuit requires only 19 qubits and 82 CNOT gates. These results demonstrate that stabilizer-generator design can substantially reduce the cost of postselected magic-state preparation, although corrected operation and the fidelity of an unmeasured output block require separate analysis.

quant-pharXiv:2609.12698•Sep 14, 2026•0 citations

Experimental Demonstration of High-Fidelity Logical Magic States from Code Switching

Lucas Daguerre, Robin Blume-Kohout, Natalie C. Brown +2 more

Preparation of high-fidelity logical magic states has remained as a necessary but daunting step towards building a large-scale fault-tolerant quantum computer. One approach is to fault-tolerantly prepare a magic state in one code and then switch to another, a method known as code switching. We experimentally demonstrate this protocol on an ion-trap quantum processor, yielding a logical magic state encoded in an error-correcting code with state-of-the-art logical fidelity. Our experiment is based on the first demonstration of code switching between color codes, from the fifteen-qubit quantum Reed-Muller code to the seven-qubit Steane code. We prepare an encoded magic state in the Steane code with 82.58% probability, with an infidelity of at most 5.1 ( 2.7 ) × 10 − 4 . The reported infidelity is lower than the leading infidelity of the physical operations utilized in the protocol by a factor of at least 2.7, indicating the quantum processor is below the pseudothreshold. Furthermore, we create two copies of the magic state in the same quantum processor and perform a logical Bell basis measurement for a sample-efficient certification of the encoded magic state. The high-fidelity magic state can be combined with the already-demonstrated fault-tolerant Clifford gates, state preparation, and measurement of the 2D color code, completing a universal set of fault-tolerant computational primitives with logical error rates equal or better than the physical two-qubit error rate.

arXiv:2506.14169•Physical Review X•Sep 18, 2025•13 citations

Exact efficient simulation of noisy logical magic states using Clifford stabilizers

Yugo Takada, Stephen D. Bartlett, Dominic J. Williamson

The preparation of high-fidelity logical magic states is a crucial subroutine for universal fault-tolerant quantum computation (FTQC). Predicting the performance of FTQC and developing improved protocols rely on numerical methods to classically simulate logical magic state preparation in the presence of noise. Clifford logic on Pauli-stabilizer codes with circuit-level Pauli errors can be efficiently simulated using Pauli-stabilizer formalism, but the non-Clifford operations required to prepare logical magic states render generic simulation inefficient. We introduce Clifford-stabilizer simulation, an exact and efficient algorithm based on updating a Clifford-stabilizer group to simulate noisy preparation protocols for a broad class of logical magic states used to implement non-Clifford gates in the third level of the Clifford hierarchy under circuit-level Pauli errors. Clifford-stabilizer simulation applies to a range of operations that commonly appear in preparation protocols for such logical magic states, including Pauli-stabilizer measurements, logical Clifford measurements, and transversal non-Clifford gates. Our algorithm for Clifford-stabilizer simulation maps a non-Clifford circuit with sampled circuit-level Pauli errors to a Clifford circuit that exactly reproduces its measurement outcome distribution, achieving time and space complexities polynomial in relevant protocol parameters. We perform exact simulation of magic state cultivation up to fault distance 7 by Clifford-stabilizer simulation. Our method provides a route to perform exact benchmarking of large-scale logical magic state preparation protocols required for useful FTQC.

quant-pharXiv:2609.16929•Sep 16, 2026•0 citations

Efficient simulation of logical magic state preparation protocols

Samyak Surti, Lucas Daguerre, Isaac H. Kim

Developing space- and time-efficient logical magic state preparation protocols will likely be an essential step towards building a large-scale fault-tolerant quantum computer. Motivated by this need, we introduce a scalable method for simulating logical magic state preparation protocols under the standard circuit-level noise model. When applied to protocols based on code switching, magic state cultivation, and magic state distillation, our method yields a complexity polynomial in (i) the number of qubits and (ii) the non-stabilizerness, e.g., stabilizer rank or Pauli rank, of the target encoded magic state. The efficiency of our simulation method is rooted in a curious fact: every circuit-level Pauli error in these protocols propagates to a Clifford error at the end. This property is satisfied by a large family of protocols, including those that repeatedly measure a transversal Clifford that squares to a Pauli. We provide a proof-of-principle numerical simulation that prepares a magic state using such logical Clifford measurements. Our work enables practical simulation of logical magic state preparation protocols without resorting to approximations or resource-intensive state-vector simulations.

quant-pharXiv:2512.23799•PRX Quantum•Dec 31, 2025•1 citation

Encoding a magic state with beyond break-even fidelity

Riddhi Swaroop Gupta, Neereja Sundaresan, Thomas Alexander +10 more

Abstract To run large-scale algorithms on a quantum computer, error-correcting codes must be able to perform a fundamental set of operations, called logic gates, while isolating the encoded information from noise 1–8 . We can complete a universal set of logic gates by producing special resources called magic states 9–11 . It is therefore important to produce high-fidelity magic states to conduct algorithms while introducing a minimal amount of noise to the computation. Here we propose and implement a scheme to prepare a magic state on a superconducting qubit array using error correction. We find that our scheme produces better magic states than those that can be prepared using the individual qubits of the device. This demonstrates a fundamental principle of fault-tolerant quantum computing 12 , namely, that we can use error correction to improve the quality of logic gates with noisy qubits. Moreover, we show that the yield of magic states can be increased using adaptive circuits, in which the circuit elements are changed depending on the outcome of mid-circuit measurements. This demonstrates an essential capability needed for many error-correction subroutines. We believe that our prototype will be invaluable in the future as it can reduce the number of physical qubits needed to produce high-fidelity magic states in large-scale quantum-computing architectures.

arXiv:2305.13581•Nature•Jan 10, 2024•115 citations

Fault-tolerant preparation of arbitrary logical states in the cat code

Zi-Jie Chen, Weizhou Cai, Liang-Xu Xie +5 more

Preparing high-fidelity logical states is a central challenge in fault-tolerant quantum computing, yet existing approaches struggle to balance control complexity against resource overhead. Here, we present a complete framework for the fault-tolerant preparation of arbitrary logical states encoded in the four-legged cat code. This framework is engineered to suppress the dominant incoherent errors, including excitation decay and dephasing in both the bosonic mode and the ancilla via error detection. Numerical simulations with experimentally realistic parameters on a 3D superconducting cavity platform yield logical infidelities on the order of $10^{-4}$. A scaling analysis confirms that the logical error rate grows nearly quadratically with the physical error rate, confirming that all first-order errors are fully suppressed. Our protocol is compatible with current hardware and is scalable to multiple bosonic modes, providing a resource-efficient foundation for magic state preparation and higher-level concatenated quantum error correction.

quant-pharXiv:2602.17438•Feb 20, 2026•0 citations
Encoding quantum information to protect it from errors is essential for performing large-scale quantum computations. Performing a universal set of quantum gates on encoded states demands a potentially large resource overhead and minimizing this overhead is key for the practical development of large-scale fault-tolerant quantum computers. We propose and experimentally implement a magic-state preparation protocol to fault-tolerantly prepare a pair of logical magic states in a [[6,2,2]] quantum error-detecting code using only eight physical qubits. Implementing this protocol on H1-1, a 20 qubit trapped-ion quantum processor, we prepare magic states with experimental infidelity 7−1+3×10−57^{+3}_{-1}\times 10^{-5}7−1+3​×10−5 with a 14.8−1+1%14.8^{+1}_{-1}\%14.8−1+1​% discard rate and use these to perform a fault-tolerant non-Clifford gate, the controlled-Hadamard (CH), with logical infidelity ≤2.3−9+9×10−4\leq 2.3^{+9}_{-9}\times 10^{-4}≤2.3−9+9​×10−4. Notably, this significantly outperforms the unencoded physical CH infidelity of 10−310^{-3}10−3. Through circuit-level stabilizer simulations, we show that this protocol can be self-concatenated to produce extremely high-fidelity magic states with low space-time overhead in a [[36,4,4]] quantum error correcting code, with logical error rates of 6×10−106\times 10^{-10}6×10−10 (5×10−145\times 10^{-14}5×10−14) at two-qubit error rate of 10−310^{-3}10−3 (10−410^{-4}10−4) respectively.
Fault-tolerant preparation of non-Clifford resource states is a major contributor to the overhead of quantum computation, motivating protocols that achieve high output fidelity with minimal qubit and circuit costs. We introduce a low-cost magic-state preparation protocol in which the choice of stabilizer generators is co-designed with the flag gadgets, allowing the syndrome-extraction circuit itself to filter correlated faults across a non-Clifford layer. The protocol prepares a logical plus state in the 15-qubit quantum Reed-Muller code, applies a transversal T gate, and gauge-fixes the same register into the seven-qubit Steane code. By reorganizing equivalent Z-type stabilizer generators into jointly flagged measurement groups, the protocol eliminates all accepted logical-error contributions arising from one or two circuit faults under destructive error detection. Under a uniform circuit-level depolarizing noise model, the postselected infidelity is 210.2p3+O(p4)210.2p^3+O(p^4)210.2p3+O(p4). At p=10−3p=10^{-3}p=10−3, exact low-order enumeration combined with stratified sampling bounds the infidelity by 2.2×10−72.2\times10^{-7}2.2×10−7 at 99.9% joint confidence, while retaining an acceptance probability of 86.9%. The complete circuit requires only 19 qubits and 82 CNOT gates. These results demonstrate that stabilizer-generator design can substantially reduce the cost of postselected magic-state preparation, although corrected operation and the fidelity of an unmeasured output block require separate analysis.
Preparation of high-fidelity logical magic states has remained as a necessary but daunting step towards building a large-scale fault-tolerant quantum computer. One approach is to fault-tolerantly prepare a magic state in one code and then switch to another, a method known as code switching. We experimentally demonstrate this protocol on an ion-trap quantum processor, yielding a logical magic state encoded in an error-correcting code with state-of-the-art logical fidelity. Our experiment is based on the first demonstration of code switching between color codes, from the fifteen-qubit quantum Reed-Muller code to the seven-qubit Steane code. We prepare an encoded magic state in the Steane code with 82.58% probability, with an infidelity of at most 5.1 ( 2.7 ) × 10 − 4 . The reported infidelity is lower than the leading infidelity of the physical operations utilized in the protocol by a factor of at least 2.7, indicating the quantum processor is below the pseudothreshold. Furthermore, we create two copies of the magic state in the same quantum processor and perform a logical Bell basis measurement for a sample-efficient certification of the encoded magic state. The high-fidelity magic state can be combined with the already-demonstrated fault-tolerant Clifford gates, state preparation, and measurement of the 2D color code, completing a universal set of fault-tolerant computational primitives with logical error rates equal or better than the physical two-qubit error rate.
The preparation of high-fidelity logical magic states is a crucial subroutine for universal fault-tolerant quantum computation (FTQC). Predicting the performance of FTQC and developing improved protocols rely on numerical methods to classically simulate logical magic state preparation in the presence of noise. Clifford logic on Pauli-stabilizer codes with circuit-level Pauli errors can be efficiently simulated using Pauli-stabilizer formalism, but the non-Clifford operations required to prepare logical magic states render generic simulation inefficient. We introduce Clifford-stabilizer simulation, an exact and efficient algorithm based on updating a Clifford-stabilizer group to simulate noisy preparation protocols for a broad class of logical magic states used to implement non-Clifford gates in the third level of the Clifford hierarchy under circuit-level Pauli errors. Clifford-stabilizer simulation applies to a range of operations that commonly appear in preparation protocols for such logical magic states, including Pauli-stabilizer measurements, logical Clifford measurements, and transversal non-Clifford gates. Our algorithm for Clifford-stabilizer simulation maps a non-Clifford circuit with sampled circuit-level Pauli errors to a Clifford circuit that exactly reproduces its measurement outcome distribution, achieving time and space complexities polynomial in relevant protocol parameters. We perform exact simulation of magic state cultivation up to fault distance 7 by Clifford-stabilizer simulation. Our method provides a route to perform exact benchmarking of large-scale logical magic state preparation protocols required for useful FTQC.
Developing space- and time-efficient logical magic state preparation protocols will likely be an essential step towards building a large-scale fault-tolerant quantum computer. Motivated by this need, we introduce a scalable method for simulating logical magic state preparation protocols under the standard circuit-level noise model. When applied to protocols based on code switching, magic state cultivation, and magic state distillation, our method yields a complexity polynomial in (i) the number of qubits and (ii) the non-stabilizerness, e.g., stabilizer rank or Pauli rank, of the target encoded magic state. The efficiency of our simulation method is rooted in a curious fact: every circuit-level Pauli error in these protocols propagates to a Clifford error at the end. This property is satisfied by a large family of protocols, including those that repeatedly measure a transversal Clifford that squares to a Pauli. We provide a proof-of-principle numerical simulation that prepares a magic state using such logical Clifford measurements. Our work enables practical simulation of logical magic state preparation protocols without resorting to approximations or resource-intensive state-vector simulations.
Abstract To run large-scale algorithms on a quantum computer, error-correcting codes must be able to perform a fundamental set of operations, called logic gates, while isolating the encoded information from noise 1–8 . We can complete a universal set of logic gates by producing special resources called magic states 9–11 . It is therefore important to produce high-fidelity magic states to conduct algorithms while introducing a minimal amount of noise to the computation. Here we propose and implement a scheme to prepare a magic state on a superconducting qubit array using error correction. We find that our scheme produces better magic states than those that can be prepared using the individual qubits of the device. This demonstrates a fundamental principle of fault-tolerant quantum computing 12 , namely, that we can use error correction to improve the quality of logic gates with noisy qubits. Moreover, we show that the yield of magic states can be increased using adaptive circuits, in which the circuit elements are changed depending on the outcome of mid-circuit measurements. This demonstrates an essential capability needed for many error-correction subroutines. We believe that our prototype will be invaluable in the future as it can reduce the number of physical qubits needed to produce high-fidelity magic states in large-scale quantum-computing architectures.
Preparing high-fidelity logical states is a central challenge in fault-tolerant quantum computing, yet existing approaches struggle to balance control complexity against resource overhead. Here, we present a complete framework for the fault-tolerant preparation of arbitrary logical states encoded in the four-legged cat code. This framework is engineered to suppress the dominant incoherent errors, including excitation decay and dephasing in both the bosonic mode and the ancilla via error detection. Numerical simulations with experimentally realistic parameters on a 3D superconducting cavity platform yield logical infidelities on the order of 10−410^{-4}10−4. A scaling analysis confirms that the logical error rate grows nearly quadratically with the physical error rate, confirming that all first-order errors are fully suppressed. Our protocol is compatible with current hardware and is scalable to multiple bosonic modes, providing a resource-efficient foundation for magic state preparation and higher-level concatenated quantum error correction.