Abstract Complex quantum networks are not only hard to establish, but also difficult to simulate due to the exponentially growing state space and noise-induced imperfections. In this work, we propose an alternative approach that leverages quantum computers and noisy intermediate-scale quantum (NISQ) devices as simulators for quantum networks, including noisy devices, channels, and protocols. Rather than treating noise as an undesired feature to be mitigated, we show how imperfections in quantum hardware can be exploited to simulate real-world communication devices under realistic conditions beyond classical simulation capabilities. Our approach allows NISQ devices with modest noise to simulate more imperfect devices, enabling large-scale, detailed quantum network simulations with exact error models. It also improves over direct implementation and benchmarking of real networks, as waiting times, locality, and memory restrictions do not apply. This framework offers flexibility, scalability, and precision, showing that NISQ devices can serve as natural testbeds for complex quantum networks.
Abstract Complex quantum networks are not only hard to establish, but also difficult to simulate due to the exponentially growing state space and noise-induced imperfections. In this work, we propose an alternative approach that leverages quantum computers and noisy intermediate-scale quantum (NISQ) devices as simulators for quantum networks, including noisy devices, channels, and protocols. Rather than treating noise as an undesired feature to be mitigated, we show how imperfections in quantum hardware can be exploited to simulate real-world communication devices under realistic conditions beyond classical simulation capabilities. Our approach allows NISQ devices with modest noise to simulate more imperfect devices, enabling large-scale, detailed quantum network simulations with exact error models. It also improves over direct implementation and benchmarking of real networks, as waiting times, locality, and memory restrictions do not apply. This framework offers flexibility, scalability, and precision, showing that NISQ devices can serve as natural testbeds for complex quantum networks.
End-to-end entanglement distribution is a key capability of upcoming quantum networks, enabling applications like distributed quantum computing, quantum sensor networks, and secure communications. Hence, its realistic and efficient simulation is crucial for quantum network design and for assessing the ability of a network to run certain applications. This work provides tools to scale-up and improve the realism of entanglement generation simulations in quantum networks. This is achieved by deriving analytical results that directly return the success probability, the output state and corresponding fidelity of a selected entanglement generation protocol, while accounting for a variety of noise sources affecting the protocol. These results are then integrated and streamlined in an upgraded version of SeQUeNCe, one of the most popular quantum network simulators. The resulting simulator features increased scalability by reducing computation time by more than 60%, while allowing for a variety of realistic noise sources, including imperfect mode matching, dark counts, and imperfect memory initialization. The simulator is also benchmarked with real experimental data and is capable of replicating the average entanglement generation time and the final state fidelity of a selected experiment. Altogether, the results can enhance current quantum network simulation capabilities towards large-scale networks, paving the way for the future quantum internet.
Abstract As research on building scalable quantum computers advances, it is important to be able to certify their correctness. Due to the exponential hardness of classically simulating quantum computation, straight-forward verification through classical simulation fails. However, we can classically simulate small scale quantum computations and hence we are able to test that devices behave as expected in this domain. This constitutes the first step towards obtaining confidence in the anticipated quantum-advantage when we extend to scales that can no longer be simulated. Realistic devices have restrictions due to their architecture and limitations due to physical imperfections and noise. Here we extend the usual ideal simulations by considering those effects. We provide a general methodology for constructing realistic simulations emulating the physical system which will both provide a benchmark for realistic devices, and guide experimental research in the quest for quantum-advantage. We exemplify our methodology by simulating a networked architecture and corresponding noise-model; in particular that of the device developed in the Networked Quantum Information Technologies Hub (NQIT) (Networked Quantum Information Technologies Hub 2018 https://nqit.ox.ac.uk/ ; 2016 private communication. The error model was based on communication with Chris Balance and Tom Harty, mediated through Niel de Beaudrap, early on the NQIT project. Continued collaboration and communication with experimentalists could lead in refinement of the error model, which could be subject for future work.). For our simulations we use, with suitable modification, the classical simulator of Bravyi and Gosset 2016 ( Phys. Rev. Lett. 116 250501). The specific problems considered belong to the class of instantaneous quantum polynomial-time ( IQP ) problems (Shepherd and Bremner 2009 Proc. R. Soc. A 465 141339), a class believed to be hard for classical computing devices, and to be a promising candidate for the first demonstration of quantum-advantage. We first consider a subclass of IQP , defined in Bermejo-Vega et al 2018 ( Phys. Rev. X 8 021010), involving two-dimensional dynamical quantum simulators, before moving to more general instances of IQP , but which are still restricted to the architecture of NQIT.
Quantum error mitigation (QEM) is vital for noisy intermediate-scale quantum (NISQ) devices. While most conventional QEM schemes assume discrete gate-based circuits with noise appearing either before or after each gate, the assumptions are inappropriate for describing realistic noise that may have strong gate dependence and complicated nonlocal effects, and general computing models such as analog quantum simulators. To address these challenges, we first extend the scenario, where each computation process, being either digital or analog, is described by a continuous time evolution. For noise from imperfections of the engineered Hamiltonian or additional noise operators, we show it can be effectively suppressed by a stochastic QEM method. Since our method assumes only accurate single qubit controls, it is applicable to all digital quantum computers and various analog simulators. Meanwhile, errors in the mitigation procedure can be suppressed by leveraging the Richardson extrapolation method. As we numerically test our method with various Hamiltonians under energy relaxation and dephasing noise and digital quantum circuits with additional two-qubit crosstalk, we show an improvement of simulation accuracy by 2 orders. We assess the resource cost of our scheme and conclude the feasibility of accurate quantum computing with NISQ devices.
Quantum computing has emerged as a transformative paradigm capable of addressing computational challenges beyond the reach of classical systems.In the current era of Noisy Intermediate-Scale Quantum (NISQ) devices, practical quantum hardware is characterized by limited qubit counts, short coherence times, gate errors, and the absence of full error correction.Despite these constraints, significant progress has been made in developing quantum machine learning (QML) techniques tailored to operate on near-term quantum processors.This paper presents a comprehensive review of Quantum Machine Learning in the context of NISQ computing.We first outline the fundamental principles of quantum computing, including qubits, superposition, entanglement, and quantum parallelism, followed by a detailed discussion of the NISQ computing model and its hardware limitations.The review then examines hybrid quantum-classical learning frameworks, variational quantum algorithms, quantum data encoding strategies, and noise mitigation techniques that enable practical implementation on existing platforms.Emerging applications across healthcare, finance, cybersecurity, climate modeling, and materials science are also surveyed to highlight the real-world potential of QML.Furthermore, key challenges such as scalability, trainability issues, and algorithmic robustness are analyzed, along with current research efforts aimed at overcoming these barriers.The paper concludes by identifying promising future directions for advancing QML toward quantum advantage.This review aims to provide researchers and practitioners with a structured understanding of the capabilities, limitations, and opportunities of quantum machine learning in the NISQ era .
Abstract Simulating open quantum systems, which interact with external environments, presents significant challenges on noisy intermediate‐scale quantum (NISQ) devices due to limited qubit resources and noise. In this study, an efficient framework is proposed for simulating open quantum systems on NISQ hardware by leveraging a time‐perturbative Kraus operator representation of the system's dynamics. This approach avoids the computationally expensive Trotterization method and exploits the Lindblad master equation to represent time evolution in a compact form, particularly for systems satisfying specific commutation relations. The efficiency of this method is demonstrated by simulating quantum channels, such as the continuous‐time Pauli channel and damped harmonic oscillators, on NISQ trapped‐ion hardware, including IonQ Harmony and Quantinuum H1‐1. Additionally, hardware‐agnostic error mitigation techniques are introduced, including Pauli channel fitting and quantum depolarizing channel inversion, to enhance the fidelity of quantum simulations. These results show strong agreement between the simulations on real quantum hardware and exact solutions, highlighting the potential of Kraus‐based methods for scalable and accurate simulation of open quantum systems on NISQ devices. This framework opens pathways for simulating more complex systems under realistic conditions in the near term.
As quantum devices continue to improve in scale and precision, a central challenge is how to effectively utilize noisy hardware for meaningful computation. Most existing approaches aim to recover noiseless circuit outputs from noisy ones through error mitigation or correction. Here, we show that noisy quantum devices can be directly leveraged as computational resources to enhance the classical simulation of quantum circuits. We introduce the Noisy-device-enhanced Classical Simulation (NDE-CS) protocol, which improves stabilizer-based classical Monte Carlo simulation methods by incorporating data obtained from noisy quantum hardware. Specifically, NDE-CS uses noisy executions of a target circuit together with noisy Clifford circuits to learn how the target circuit can be expressed in terms of Clifford circuits under realistic noise. The same learned relation can then be reused in the noiseless Clifford limit, enabling accurate estimation of ideal expectation values with substantially reduced sampling cost. Numerical simulations on Trotterized Ising circuits demonstrate that NDE-CS achieves orders-of-magnitude reductions in sampling cost compared to the underlying purely classical Monte Carlo approaches from which it is derived, while maintaining the same accuracy. We also compare NDE-CS with Sparse Pauli Dynamics (SPD), a powerful classical framework capable of simulating quantum circuits at previously inaccessible scales, and provide an example where the cost of SPD scales exponentially with system size, while NDE-CS scales much more favorably. These results establish NDE-CS as a scalable hybrid simulation approach for quantum circuits, where noise can be harnessed as a computational asset.