Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2506.06650

Diagnostics of the condensate fraction in a clustered supersonic argon jet

Yu. S. Doronin, Tkachenko, A. A., Volodymyr L. Vakula, Г. В. Камарчук

Published Jun 7, 2025• 0 citations
arXivHTMLPDF

Abstract

A new method for determining the condensate fraction and cluster density in absolute units has been proposed and tested for a supersonic argon jet, which can also be applied to supersonic jets of other gases. The method is based on measuring the absolute intensities of the Ar II resonance lines (93.2 and 92.0 nm) when the supersonic jet is excited by an electron beam with constant current density. Knowing the absolute intensities of the lines and their emission cross sections, we determined the density of the noncondensed atomic component in the supersonic argon jet and the evolution of the condensate fraction over the whole temperature range investigated.

DOI
10.48550/arxiv.2506.06650

Related papers

Condensation limited cooling in supersonic expansions

Matthias Hillenkamp, Sharon Keinan, Uzi Even

Supersonic expansions of pure and seeded rare gases have been investigated experimentally, measuring the translational and rotational temperatures. The lowest achievable translational temperature in the jet depends on both gas properties as well as on experimental boundary conditions like nozzle shape and nozzle–skimmer distance. We show that there is a limit to the lowest temperature achieved, under practical conditions, set by condensation in the jet. A large cluster binding energy enhances the formation of clusters and they release their condensation energy into the beam. The spatial confinement of the jet extends to long distances, and is sensitive to the shape of the nozzle. The confined jet forms a narrow cone of high intensity, and results in increased collision probability and cluster formation.

The Journal of Chemical Physics•May 8, 2003•133 citations

Experimental Investigation of Small Helium Clusters: Magic Numbers and the Onset of Condensation

Peter W. Stephens, John Gordon King

Clusters of He atoms formed in a supersonic free jet expansion have been studied by electron-bombardment ionization and mass spectrometry. Distinct magic-number enhancements of ion intensity are observed for clusters of 7, 10, 14, and 30 atoms for both helium isotopes, and for 23 atoms of $^{4}\mathrm{He}$. Dramatic differences in the onset of cluster formation between the two isotopes may be related to the stability of $^{4}\mathrm{He}$ dimers.

Physical Review Letters•Oct 24, 1983•147 citations

Molecules in the cold environment of a supersonic free-jet beam: from spectroscopy of neutral–neutral interactions to a test of Bell's inequality

J. Koperski, Edward S. Fry

The supersonic free-jet expansion technique has been used in different fields of research in physics, physical chemistry and chemistry to study vibrational and rotational molecular structures in ground and excited electronic energy states as well as in cold chemistry to study chemical reactions in a unique environment. The supersonic beam technique, as a widely used method in laser spectroscopy of molecules, exploits a source of monokinetic, rotationally and vibrationally cold molecules, that are very weakly bound in their ground electronic states (van der Waals molecules). In experiments at Jagiellonian University the supersonic free-jet beam serves as a source of ground-state van der Waals objects in studies of neutral–neutral interactions between group 12 metal (M = Zn, Cd, Hg) and noble gas (NG) atoms. Recently, the method has been applied as a source of entangled 199 Hg atom pairs in order to test Bell's inequality in an experiment at Texas A&M University.

Journal of Physics B Atomic Molecular and Optical Physics•Sep 25, 2006•19 citations

Supersonic Molecular Beams of Alkali Dimers

Robert J. Gordon, Y. T. Lee, Dudley R. Herschbach

Intense alkali beams containing up to 30% mole fraction of K2, Rb2, or Cs2 have been generated from a supersonic nozzle expansion, with oven temperatures up to ∼ 900°K (corresponding to alkali vapor pressures up to ∼ 350 torr) and nozzle temperatures ∼ 50–300°K higher. The total beam intensity obtained reached ∼ 5 × 1017 particles sec−1·sr−1. An inhomogeneous deflecting magnet was used to separate the dimer and atom components of the beam, and the variation of dimer concentration with oven pressure and nozzle temperature were studied for a variety of nozzle sizes (throat diameters 0.04–0.15 mm). The velocity distributions of the atom and dimer components were also measured and found to be quite similar; the peaks occur at velocities up to 70% higher than the most probable atom velocity in the oven, and the widths are very narrow, corresponding to random translational temperatures as low as ∼ 30°K, and Mach numbers up to ∼ 15. A simple one-dimensional theory of dimerization which takes into account vibrational relaxation and heat of condensation is found to be consistent with the data. It is shown that the observed velocity distributions and the variation of the dimer yield with pressure and nozzle diameter imply that most of the heat of condensation does not contribute to the beam acceleration but goes into vibrational excitation of the dimer molecules. A nominal value of ∼ 3 × 10−30 cm6 sec−1 at ∼ 600°K is obtained for the recombination rate constant for Cs+Cs+Cs→Cs2+Cs. A reduced variable plot is provided which enables the theory to be applied to nozzle expansions of any substance for which the chemical recombination is governed by three-body collisions.

The Journal of Chemical Physics•Mar 15, 1971•139 citations

Ultra-precise particle velocities in pulsed supersonic beams

Wolfgang Christen

We describe an improved experimental method for the generation of cold, directed particle bunches, and the highly accurate determination of their velocities in a pulsed supersonic beam, allowing for high-resolution experiments of atoms, molecules, and clusters. It is characterized by a pulsed high pressure jet source with high brilliance and optimum repeatability, a flight distance of few metres that can be varied with a tolerance of setting of 50 μm, and a precision in the mean flight time of particles of better than 10(-4). The technique achieves unmatched accuracies in particle velocities and kinetic energies and also permits the reliable determination of enthalpy changes with very high precision.

The Journal of Chemical Physics•Jul 8, 2013•6 citations

Direct Images of the Virtual Source in a Supersonic Expansion

Thomas J.G. Reisinger, G. Bracco, Stefan Rehbein +3 more

Direct images of the virtual source in a supersonic expansion of helium are presented. The images were obtained using a Fresnel zone plate with free-standing zones, 540 microm in diameter and with an outermost zone width of 50 nm. The general method can be extended to other beams, including seeded beams. Measurements were carried out at absolute source pressures ranging from 11 to 171 bar using a 10 microm nozzle with a source temperature of 320 K. The size of the virtual source was found to be strongly dependent on pressure, changing from a diameter of 67+/-6 microm at an absolute nozzle pressure of 11 bar to 180+/-9 microm at 171 bar. The virtual-source brightness displays a maximum at an absolute nozzle pressure of around 30 bar. This phenomenon occurs because of two competing effects: As the pressure increases, the total flux also increases, but at the same time the virtual source broadens. We modeled the expansion process by calculating the velocity distribution with solutions from the Boltzmann equation to estimate the location of the quitting surface where the frequency of interatomic collisions is assumed negligible. Realistic potentials have been used to calculate the cross section for atomic collisions and, for the velocity distribution perpendicular to the center streamline, a proper scaling with distance derived from the continuum expansion model has been introduced. A good agreement between experiments and model has been found and we discuss its approximation limits. For instance, backscattering effects are not included in the calculations and at present we cannot exclude that they also contribute to a broadening of the virtual-source size for the highest pressure regime. The results presented here are important for improving the understanding of the supersonic expansion process. The experimental method might eventually be used as a new way to test molecular and atomic interaction potentials.

The Journal of Physical Chemistry A•Nov 7, 2007•35 citations
A new method for determining the condensate fraction and cluster density in absolute units has been proposed and tested for a supersonic argon jet, which can also be applied to supersonic jets of other gases. The method is based on measuring the absolute intensities of the Ar II resonance lines (93.2 and 92.0 nm) when the supersonic jet is excited by an electron beam with constant current density. Knowing the absolute intensities of the lines and their emission cross sections, we determined the density of the noncondensed atomic component in the supersonic argon jet and the evolution of the condensate fraction over the whole temperature range investigated.
Supersonic expansions of pure and seeded rare gases have been investigated experimentally, measuring the translational and rotational temperatures. The lowest achievable translational temperature in the jet depends on both gas properties as well as on experimental boundary conditions like nozzle shape and nozzle–skimmer distance. We show that there is a limit to the lowest temperature achieved, under practical conditions, set by condensation in the jet. A large cluster binding energy enhances the formation of clusters and they release their condensation energy into the beam. The spatial confinement of the jet extends to long distances, and is sensitive to the shape of the nozzle. The confined jet forms a narrow cone of high intensity, and results in increased collision probability and cluster formation.
Clusters of He atoms formed in a supersonic free jet expansion have been studied by electron-bombardment ionization and mass spectrometry. Distinct magic-number enhancements of ion intensity are observed for clusters of 7, 10, 14, and 30 atoms for both helium isotopes, and for 23 atoms of 4He^{4}\mathrm{He}4He. Dramatic differences in the onset of cluster formation between the two isotopes may be related to the stability of 4He^{4}\mathrm{He}4He dimers.
The supersonic free-jet expansion technique has been used in different fields of research in physics, physical chemistry and chemistry to study vibrational and rotational molecular structures in ground and excited electronic energy states as well as in cold chemistry to study chemical reactions in a unique environment. The supersonic beam technique, as a widely used method in laser spectroscopy of molecules, exploits a source of monokinetic, rotationally and vibrationally cold molecules, that are very weakly bound in their ground electronic states (van der Waals molecules). In experiments at Jagiellonian University the supersonic free-jet beam serves as a source of ground-state van der Waals objects in studies of neutral–neutral interactions between group 12 metal (M = Zn, Cd, Hg) and noble gas (NG) atoms. Recently, the method has been applied as a source of entangled 199 Hg atom pairs in order to test Bell's inequality in an experiment at Texas A&M University.
Intense alkali beams containing up to 30% mole fraction of K2, Rb2, or Cs2 have been generated from a supersonic nozzle expansion, with oven temperatures up to ∼ 900°K (corresponding to alkali vapor pressures up to ∼ 350 torr) and nozzle temperatures ∼ 50–300°K higher. The total beam intensity obtained reached ∼ 5 × 1017 particles sec−1·sr−1. An inhomogeneous deflecting magnet was used to separate the dimer and atom components of the beam, and the variation of dimer concentration with oven pressure and nozzle temperature were studied for a variety of nozzle sizes (throat diameters 0.04–0.15 mm). The velocity distributions of the atom and dimer components were also measured and found to be quite similar; the peaks occur at velocities up to 70% higher than the most probable atom velocity in the oven, and the widths are very narrow, corresponding to random translational temperatures as low as ∼ 30°K, and Mach numbers up to ∼ 15. A simple one-dimensional theory of dimerization which takes into account vibrational relaxation and heat of condensation is found to be consistent with the data. It is shown that the observed velocity distributions and the variation of the dimer yield with pressure and nozzle diameter imply that most of the heat of condensation does not contribute to the beam acceleration but goes into vibrational excitation of the dimer molecules. A nominal value of ∼ 3 × 10−30 cm6 sec−1 at ∼ 600°K is obtained for the recombination rate constant for Cs+Cs+Cs→Cs2+Cs. A reduced variable plot is provided which enables the theory to be applied to nozzle expansions of any substance for which the chemical recombination is governed by three-body collisions.
We describe an improved experimental method for the generation of cold, directed particle bunches, and the highly accurate determination of their velocities in a pulsed supersonic beam, allowing for high-resolution experiments of atoms, molecules, and clusters. It is characterized by a pulsed high pressure jet source with high brilliance and optimum repeatability, a flight distance of few metres that can be varied with a tolerance of setting of 50 μm, and a precision in the mean flight time of particles of better than 10(-4). The technique achieves unmatched accuracies in particle velocities and kinetic energies and also permits the reliable determination of enthalpy changes with very high precision.
Direct images of the virtual source in a supersonic expansion of helium are presented. The images were obtained using a Fresnel zone plate with free-standing zones, 540 microm in diameter and with an outermost zone width of 50 nm. The general method can be extended to other beams, including seeded beams. Measurements were carried out at absolute source pressures ranging from 11 to 171 bar using a 10 microm nozzle with a source temperature of 320 K. The size of the virtual source was found to be strongly dependent on pressure, changing from a diameter of 67+/-6 microm at an absolute nozzle pressure of 11 bar to 180+/-9 microm at 171 bar. The virtual-source brightness displays a maximum at an absolute nozzle pressure of around 30 bar. This phenomenon occurs because of two competing effects: As the pressure increases, the total flux also increases, but at the same time the virtual source broadens. We modeled the expansion process by calculating the velocity distribution with solutions from the Boltzmann equation to estimate the location of the quitting surface where the frequency of interatomic collisions is assumed negligible. Realistic potentials have been used to calculate the cross section for atomic collisions and, for the velocity distribution perpendicular to the center streamline, a proper scaling with distance derived from the continuum expansion model has been introduced. A good agreement between experiments and model has been found and we discuss its approximation limits. For instance, backscattering effects are not included in the calculations and at present we cannot exclude that they also contribute to a broadening of the virtual-source size for the highest pressure regime. The results presented here are important for improving the understanding of the supersonic expansion process. The experimental method might eventually be used as a new way to test molecular and atomic interaction potentials.