Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2506.05315

The Arm Qubit: A Superconducting Qubit Co-Designed for Coherence and Coupling

Jeremy B. Kline, Alec Yen, Stanley Chen, Kevin P. O’Brien

Published Jun 5, 2025• 0 citations
arXivHTMLPDF

Abstract

We present a superconducting qubit which consists of two strongly coupled modes: one for data storage and one for coupling, allowing faster, higher-fidelity entangling gates and readout. The use of a dedicated coupling mode allows nonlinear couplings of several hundred MHz between the data mode and other elements, with minimal linear coupling to the data mode. Including decoherence, simulations show that this architecture enables microwave-only CZ gates with an infidelity of $8.6\times10^{-5}$ in 17 ns and always-on ZZ interaction less than 0.4 kHz. Numerical simulations also show readout with state assignment error of $1\times10^{-4}$ in 27 ns (assuming quantum efficiency $η=0.5$), Purcell-limited lifetime of 167 ms without a Purcell filter, and a mechanism to suppress shot-noise dephasing ($1/Γ_ϕ=15.8$ ms). Single-qubit gate infidelities are below $1\times10^{-5}$ including decoherence. These beyond experimental state-of-the-art gate and readout fidelities rely only on capacitive coupling between arm qubits, making the arm qubit a promising scalable building block for fault-tolerant quantum computers.

DOI
10.48550/arxiv.2506.05315

Related papers

The Arm Qubit for Faster, Higher Fidelity Readout and Gates

Jeremy B. Kline

Currently, superconducting qubit processors are bottlenecked by errors during two-qubit gates, readout, and idle time. All three error contributions could be reduced if we improved the speed of operations (without introducing additional leakage errors) compared to the qubit lifetime. Readout and two-qubit gates are multimode interactions and therefore are limited by the coupling strength between the modes. In this thesis, we introduce a two-mode superconducting qubit which uses one mode to facilitate strong coupling to other modes of the quantum processor and one mode to store data with high coherence. Simulations show that this architecture could enable order-of-magnitude reductions in error during readout and two-qubit gates.

•Sep 1, 2025•0 citations

A high-fidelity two-qubit gate for multimode superconducting P-mon qubits

Frederik Pfeiffer, Federico A. Roy, Niklas J. Glaser +11 more

To scale superconducting quantum processors, it is essential to achieve long coherence times while engineering interactions that do not introduce additional decoherence channels. In superconducting qubit systems, this can be realized using multimode circuits that feature a protected qubit mode alongside a distinct mediator mode. Building on this concept, our recently developed P-mon qubit provides intrinsic protection against decoherence from the readout environment. We extend this approach to controlled two-qubit interactions, by exploiting the mediator modes of P-mons for on-demand coupling. Because direct interactions between the qubit modes are strongly suppressed, unwanted $ZZ$-type interactions are significantly reduced to below $3.6(5)~\text{kHz}$ in the idle state. When tuning the coupled mediator modes on resonance, the cross-Kerr interaction between the qubit and the hybridized mediator modes leads to a qubit-state dependent frequency shift. By selectively addressing these transitions, we implement a $180~\text{ns}$ long CZ gate and determine a fidelity of $99.62(4)~\text{%}$. These results represent a significant step toward a scalable superconducting architecture that maintains high performance at scale.

quant-pharXiv:2606.24772•Jun 24, 2026•0 citations

High-contrast ZZ interaction using multi-type superconducting qubits

Peng Zhao, Peng Xu, Dong Lan +3 more

For building a scalable quantum processor with superconducting qubits, the ZZ interaction is of great concert because of relevant for implementing two-qubit gates, and the close contact between gate infidelity and its residual. Two-qubit gates with fidelity beyond fault-tolerant thresholds have been demonstrated using the ZZ interaction. However, as the performance of quantum processor improves, the residual static-ZZ can also become a performance-limiting factor for quantum gate operations and quantum error correction. Here, we introduce a scalable superconducting architecture for addressing this challenge. We demonstrate that by coupling two superconducting qubits with opposite-sign anharmonicities together, high-contrast ZZ interaction can be realized in this architecture. Thus, we can control ZZ interaction with high on/off ratio for implementing two-qubit CZ gate, or suppress it during the two-qubit gate operations using XY interaction (e.g. iSWAP). Meanwhile, the ZZ crosstalk related to neighboring spectator qubits can also be heavily suppressed in fixed coupled multi-qubit systems. This architecture could provide a promising way towards scalable superconducting quantum processor with high gate fidelity and low qubit crosstalk.

•Feb 18, 2020•1 citation

High-Coherence Kerr-Cat Qubit in 2D Architecture

Ahmed Hajr, Bingcheng Qing, Ke Wang +15 more

The Kerr-cat qubit is a bosonic qubit in which multiphoton Schrödinger cat states are stabilized by applying a two-photon drive to an oscillator with a Kerr nonlinearity. The suppressed bit-flip rate with increasing cat size makes this qubit a promising candidate to implement quantum error correction codes tailored for noise-biased qubits. However, achieving strong light-matter interactions necessary for stabilizing and controlling this qubit has traditionally required strong microwave drives that heat the qubit and degrade its performance. In contrast, increasing the coupling to the drive port removes the need for strong drives at the expense of large Purcell decay. By integrating an effective band-block filter on chip, we overcome this trade-off and realize a Kerr-cat qubit in a scalable 2D superconducting circuit with high coherence. This filter provides 30 dB of isolation at the qubit frequency with negligible attenuation at the frequencies required for stabilization and readout. We experimentally demonstrate quantum nondemolition readout fidelity of 99.6% for a cat with eight photons. Also, to have high-fidelity universal control over this qubit, we combine fast Rabi oscillations with a new demonstration of the X ( π / 2 ) gate through phase modulation of the stabilization drive. Finally, the lifetime in this architecture is examined as a function of the cat size of up to ten photons in the oscillator, achieving a bit-flip time higher than 1 ms and only a linear increase in the phase-flip rate, in good agreement with the theoretical analysis of the circuit. Our qubit shows promise as a building block for fault-tolerant quantum processors with a small footprint. Published by the American Physical Society 2024

arXiv:2404.16697•Physical Review X•Nov 20, 2024•27 citations

High-fidelity controlled- σZ gate for resonator-based superconducting quantum computers

Joydip Ghosh, Andrei Galiautdinov, Zhongyuan Zhou +3 more

A possible building block for a scalable quantum computer has recently been demonstrated [Mariantoni et al., Science 334, 61 (2011)]. This architecture consists of superconducting qubits capacitively coupled both to individual memory resonators as well as a common bus. In this work we study a natural primitive entangling gate for this and related resonator-based architectures, which consists of a controlled-${\ensuremath{\sigma}}^{z}$ (cz) operation between a qubit and the bus. The cz gate is implemented with the aid of the noncomputational qubit $|2\ensuremath{\rangle}$ state [Strauch et al., Phys. Rev. Lett. 91, 167005 (2003)]. Assuming phase or transmon qubits with 300 MHz anharmonicity, we show that by using only low frequency qubit-bias control it is possible to implement the qubit-bus cz gate with 99.9$%$ (99.99$%$) fidelity in about $17\phantom{\rule{0.16em}{0ex}}\mathrm{ns}$ ($23\phantom{\rule{0.16em}{0ex}}\mathrm{ns}$) with a realistic two-parameter pulse profile, plus two auxiliary $z$ rotations. The fidelity measure we refer to here is a state-averaged intrinsic process fidelity, which does not include any effects of noise or decoherence. These results apply to a multiqubit device that includes strongly coupled memory resonators. We investigate the performance of the qubit-bus cz gate as a function of qubit anharmonicity, identify the dominant intrinsic error mechanism and derive an associated fidelity estimator, quantify the pulse shape sensitivity and precision requirements, simulate qubit-qubit cz gates that are mediated by the bus resonator, and also attempt a global optimization of system parameters including resonator frequencies and couplings. Our results are relevant for a wide range of superconducting hardware designs that incorporate resonators and suggest that it should be possible to demonstrate a $99.9%$ cz gate with existing transmon qubits, which would constitute an important step towards the development of an error-corrected superconducting quantum computer.

arXiv:1301.1719•Physical Review A•Feb 8, 2013•87 citations

Three-mode tunable coupler for superconducting two-qubit gates

Elena Yu. Egorova, Alena S. Kazmina, Ilya A. Simakov +7 more

Building a scalable universal high-performance quantum processor is a formidable challenge. In particular, the problem of realizing fast high-perfomance two-qubit gates of high-fidelity remains needful. Here we propose a building block for a scalable quantum processor consisting of two transmons and a tunable three-mode coupler allowing for a ZZ interaction control. We experimentally demonstrate the native CZ gate with the pulse duration of 60 ns achieving the two-qubit gate fidelity above 98%, limited mostly by qubit coherence time. Numerical simulations show that by optimizing the gate duration the fidelity can be pushed over 99.97%.

arXiv:2405.10886•Physical Review Applied•Jun 5, 2025•5 citations
We present a superconducting qubit which consists of two strongly coupled modes: one for data storage and one for coupling, allowing faster, higher-fidelity entangling gates and readout. The use of a dedicated coupling mode allows nonlinear couplings of several hundred MHz between the data mode and other elements, with minimal linear coupling to the data mode. Including decoherence, simulations show that this architecture enables microwave-only CZ gates with an infidelity of 8.6×10−58.6\times10^{-5}8.6×10−5 in 17 ns and always-on ZZ interaction less than 0.4 kHz. Numerical simulations also show readout with state assignment error of 1×10−41\times10^{-4}1×10−4 in 27 ns (assuming quantum efficiency η=0.5η=0.5η=0.5), Purcell-limited lifetime of 167 ms without a Purcell filter, and a mechanism to suppress shot-noise dephasing (1/Γϕ=15.81/Γ_ϕ=15.81/Γϕ​=15.8 ms). Single-qubit gate infidelities are below 1×10−51\times10^{-5}1×10−5 including decoherence. These beyond experimental state-of-the-art gate and readout fidelities rely only on capacitive coupling between arm qubits, making the arm qubit a promising scalable building block for fault-tolerant quantum computers.
Currently, superconducting qubit processors are bottlenecked by errors during two-qubit gates, readout, and idle time. All three error contributions could be reduced if we improved the speed of operations (without introducing additional leakage errors) compared to the qubit lifetime. Readout and two-qubit gates are multimode interactions and therefore are limited by the coupling strength between the modes. In this thesis, we introduce a two-mode superconducting qubit which uses one mode to facilitate strong coupling to other modes of the quantum processor and one mode to store data with high coherence. Simulations show that this architecture could enable order-of-magnitude reductions in error during readout and two-qubit gates.
To scale superconducting quantum processors, it is essential to achieve long coherence times while engineering interactions that do not introduce additional decoherence channels. In superconducting qubit systems, this can be realized using multimode circuits that feature a protected qubit mode alongside a distinct mediator mode. Building on this concept, our recently developed P-mon qubit provides intrinsic protection against decoherence from the readout environment. We extend this approach to controlled two-qubit interactions, by exploiting the mediator modes of P-mons for on-demand coupling. Because direct interactions between the qubit modes are strongly suppressed, unwanted ZZZZZZ-type interactions are significantly reduced to below 3.6(5) kHz3.6(5)~\text{kHz}3.6(5) kHz in the idle state. When tuning the coupled mediator modes on resonance, the cross-Kerr interaction between the qubit and the hybridized mediator modes leads to a qubit-state dependent frequency shift. By selectively addressing these transitions, we implement a 180 ns180~\text{ns}180 ns long CZ gate and determine a fidelity of $99.62(4)~\text{%}$. These results represent a significant step toward a scalable superconducting architecture that maintains high performance at scale.
For building a scalable quantum processor with superconducting qubits, the ZZ interaction is of great concert because of relevant for implementing two-qubit gates, and the close contact between gate infidelity and its residual. Two-qubit gates with fidelity beyond fault-tolerant thresholds have been demonstrated using the ZZ interaction. However, as the performance of quantum processor improves, the residual static-ZZ can also become a performance-limiting factor for quantum gate operations and quantum error correction. Here, we introduce a scalable superconducting architecture for addressing this challenge. We demonstrate that by coupling two superconducting qubits with opposite-sign anharmonicities together, high-contrast ZZ interaction can be realized in this architecture. Thus, we can control ZZ interaction with high on/off ratio for implementing two-qubit CZ gate, or suppress it during the two-qubit gate operations using XY interaction (e.g. iSWAP). Meanwhile, the ZZ crosstalk related to neighboring spectator qubits can also be heavily suppressed in fixed coupled multi-qubit systems. This architecture could provide a promising way towards scalable superconducting quantum processor with high gate fidelity and low qubit crosstalk.
The Kerr-cat qubit is a bosonic qubit in which multiphoton Schrödinger cat states are stabilized by applying a two-photon drive to an oscillator with a Kerr nonlinearity. The suppressed bit-flip rate with increasing cat size makes this qubit a promising candidate to implement quantum error correction codes tailored for noise-biased qubits. However, achieving strong light-matter interactions necessary for stabilizing and controlling this qubit has traditionally required strong microwave drives that heat the qubit and degrade its performance. In contrast, increasing the coupling to the drive port removes the need for strong drives at the expense of large Purcell decay. By integrating an effective band-block filter on chip, we overcome this trade-off and realize a Kerr-cat qubit in a scalable 2D superconducting circuit with high coherence. This filter provides 30 dB of isolation at the qubit frequency with negligible attenuation at the frequencies required for stabilization and readout. We experimentally demonstrate quantum nondemolition readout fidelity of 99.6% for a cat with eight photons. Also, to have high-fidelity universal control over this qubit, we combine fast Rabi oscillations with a new demonstration of the X ( π / 2 ) gate through phase modulation of the stabilization drive. Finally, the lifetime in this architecture is examined as a function of the cat size of up to ten photons in the oscillator, achieving a bit-flip time higher than 1 ms and only a linear increase in the phase-flip rate, in good agreement with the theoretical analysis of the circuit. Our qubit shows promise as a building block for fault-tolerant quantum processors with a small footprint. Published by the American Physical Society 2024
A possible building block for a scalable quantum computer has recently been demonstrated [Mariantoni et al., Science 334, 61 (2011)]. This architecture consists of superconducting qubits capacitively coupled both to individual memory resonators as well as a common bus. In this work we study a natural primitive entangling gate for this and related resonator-based architectures, which consists of a controlled-${\ensuremath{\sigma}}^{z}$ (cz) operation between a qubit and the bus. The cz gate is implemented with the aid of the noncomputational qubit $|2\ensuremath{\rangle}$ state [Strauch et al., Phys. Rev. Lett. 91, 167005 (2003)]. Assuming phase or transmon qubits with 300 MHz anharmonicity, we show that by using only low frequency qubit-bias control it is possible to implement the qubit-bus cz gate with 99.9% (99.99%) fidelity in about 17ns17\phantom{\rule{0.16em}{0ex}}\mathrm{ns}17ns (23ns23\phantom{\rule{0.16em}{0ex}}\mathrm{ns}23ns) with a realistic two-parameter pulse profile, plus two auxiliary zzz rotations. The fidelity measure we refer to here is a state-averaged intrinsic process fidelity, which does not include any effects of noise or decoherence. These results apply to a multiqubit device that includes strongly coupled memory resonators. We investigate the performance of the qubit-bus cz gate as a function of qubit anharmonicity, identify the dominant intrinsic error mechanism and derive an associated fidelity estimator, quantify the pulse shape sensitivity and precision requirements, simulate qubit-qubit cz gates that are mediated by the bus resonator, and also attempt a global optimization of system parameters including resonator frequencies and couplings. Our results are relevant for a wide range of superconducting hardware designs that incorporate resonators and suggest that it should be possible to demonstrate a 99.999.9%99.9 cz gate with existing transmon qubits, which would constitute an important step towards the development of an error-corrected superconducting quantum computer.
Building a scalable universal high-performance quantum processor is a formidable challenge. In particular, the problem of realizing fast high-perfomance two-qubit gates of high-fidelity remains needful. Here we propose a building block for a scalable quantum processor consisting of two transmons and a tunable three-mode coupler allowing for a ZZ interaction control. We experimentally demonstrate the native CZ gate with the pulse duration of 60 ns achieving the two-qubit gate fidelity above 98%, limited mostly by qubit coherence time. Numerical simulations show that by optimizing the gate duration the fidelity can be pushed over 99.97%.