Abstract Imperfect measurements are a prevalent source of error across quantum computing platforms, significantly degrading the logical error rates achievable on current hardware. To mitigate this issue, rich measurement data referred to as soft information has been proposed to efficiently identify and correct measurement errors as they occur. In this work, we model soft information decoding across a variety of physical qubit platforms and decoders and showcase how soft information can make error correction viable at lower code distances and higher physical error rates than is otherwise possible. We simulate the effects of soft information decoding on quantum memories for surface codes and bivariate bicycle codes, and evaluate the error suppression performance of soft decoders against traditional decoders. Our simulations show that soft information decoding on near-term devices can provide up to 11% higher error suppression on superconducting qubits and up to 20% stronger error suppression on neutral atom qubits. These accuracy gains correspond to 13% and 33% reductions in the physical qubit footprint of superconducting and neutral atom devices respectively when operating at a logical error rate of 10 −6 , showcasing that soft information is a powerful tool for reducing the cost and complexity of large-scale fault-tolerant quantum computers.
Abstract Imperfect measurements are a prevalent source of error across quantum computing platforms, significantly degrading the logical error rates achievable on current hardware. To mitigate this issue, rich measurement data referred to as soft information has been proposed to efficiently identify and correct measurement errors as they occur. In this work, we model soft information decoding across a variety of physical qubit platforms and decoders and showcase how soft information can make error correction viable at lower code distances and higher physical error rates than is otherwise possible. We simulate the effects of soft information decoding on quantum memories for surface codes and bivariate bicycle codes, and evaluate the error suppression performance of soft decoders against traditional decoders. Our simulations show that soft information decoding on near-term devices can provide up to 11% higher error suppression on superconducting qubits and up to 20% stronger error suppression on neutral atom qubits. These accuracy gains correspond to 13% and 33% reductions in the physical qubit footprint of superconducting and neutral atom devices respectively when operating at a logical error rate of 10 −6 , showcasing that soft information is a powerful tool for reducing the cost and complexity of large-scale fault-tolerant quantum computers.
Quantum error correction promises a viable path to fault-tolerant computations, enabling exponential error suppression when the device's error rates remain below the protocol's threshold. However, this threshold strongly depends on the classical method used to decode the measurements of the syndrome. These classical algorithms traditionally only interpret binary data, ignoring valuable information contained in complete analog measurement data. We present the first large-scale experimental verification of soft decoding by implementing repetition codes up to distance 51 on superconducting hardware. Unlike previous demonstrations limited to small code distances, this extensive range allows us to confirm a fundamental improvement in the exponential scaling of error suppression rather than a mere constant-factor reduction in error rates. We observe a 25% increase in the threshold, which yields logical error rates up to 30 times lower than standard hard decoding. Analyzing the trade-off between information volume and decoding performance, we show that a single byte of information per measurement suffices to reach optimal decoding. This underscores the effectiveness and practicality of soft decoding on hardware, including in time-sensitive contexts such as real-time decoding.
Quantum error correction allows for quantum information to be preserved using logical qubits, which are subject to lower error rates than their constituent physical qubits. The degree of error suppression depends on the choice of error correcting code and distance, the underlying physical error rate, and the accuracy of the decoder. While traditional decoders utilise a binary (hard) syndrome, recent work shows that additional (soft) information captured during qubit readout can be effectively utilised to improve decoding accuracy. In this work, we present experimental results from a distance-three surface code implemented on transmon qubits, where we perform Z-stabiliser measurements to protect the state of the logical qubit against bit-flip errors. We initialise the logical qubit in one of 16 possible computational states representing the logical zero state, and perform repeated stabiliser checks over a variable number of rounds to preserve the state over time. We compare the decoding performance for a hard minimum-weight perfect matching decoder against a soft variant where rich measurement information is incorporated, and demonstrate an improved logical fidelity. Additionally, we employ a recurrent neural network decoder with both soft and hard variants and observe improved performance when soft information is used. The general nature of soft information makes it widely applicable to different physical qubit platforms, where it can be leveraged to shorten measurement times and improve the logical fidelity in quantum error correction experiments. Pre-print available at arXiv:2403.00706.
Quantum error mitigation (QEM) is typically viewed as a suite of practical techniques for today's noisy intermediate-scale quantum devices, with limited relevance once fault-tolerant quantum computers become available. In this work, we challenge this conventional wisdom by showing that QEM can continue to provide substantial benefits in the era of quantum error correction (QEC), and in an even more efficient manner than it does on current devices. We introduce a framework for logical-level QEM that leverages soft information naturally produced by QEC decoders, requiring no additional data, hardware modifications, or runtime overhead beyond what QEC protocols already provide. Within this framework, we develop and analyze three logical-level QEM techniques: post-selection and runtime abort policies, probabilistic error cancellation, and zero-noise extrapolation. Our techniques reduce logical error rates by more than 100x while discarding fewer than 0.1% of shots; they also provide in situ characterization of logical channels for QEM protocols. As a proof of principle, we benchmark our approach using a surface-code architecture and two state-of-the-art decoders based on tensor-network contraction and minimum-weight perfect matching. We evaluate logical-level QEM on random Clifford circuits and molecular simulation algorithms and find that, compared to previous approaches relying on QEC only or QEC combined with QEM, we can achieve up to 87.4% spacetime overhead savings. Our results demonstrate that logical-level QEM with QEC decoder soft information can reliably improve logical performance, underscoring the efficiency and usefulness of QEM techniques for fault-tolerant quantum computers.
Quantum computation holds the promise of solving certain complex problems exponentially faster than classical computers. However, the high prevalent noise in current quantum devices impedes the accurate execution of even basic algorithms. This can be remedied by protecting quantum information with a quantum error-correcting code, where the logical information of an algorithmic qubit is spread across multiple physical qubits. Individual quantum errors are then located and corrected by the fault-tolerant measurement of multi-qubit stabilizer operators (parity checks). Unfortunately, error correction and fault tolerance both impose large demands on the qubit overhead: hundreds to thousands of physical qubits per logical qubit.
We reduce the spacetime cost of fault tolerance by redesigning key building blocks of an error-corrected quantum computer. First, we develop a combinatorial proof with flag fault tolerance that exponentially reduces the extra qubits needed to measure a stabilizer of any size, while tolerating one fault. We leverage these proofs to then design state preparation circuits for the Steane and Golay codes with 100% yield. Next, we improve error correction on a planar layout by showing that a distance-four code encoding six logical qubits protects information as well as the distance-five surface code, using one-tenth as many physical qubits. Finally, we optimize the time overhead of logical gates in surface code quantum computers by protecting measurement results with a classical code, cutting computation time by a factor of two to six. Our hardware-agnostic optimizations of fault tolerance overheads thus suggest new routes to advance the timeline of error-free quantum computing.
Quantum error correction enables the preservation of logical qubits with a lower logical error rate than the physical error rate, with performance depending on the decoding method. Traditional decoding approaches rely on the binarization (“hardening”) of readout data, thereby ignoring valuable information embedded in the analog (“soft”) readout signal. We present experimental results showcasing the advantages of incorporating soft information into the decoding process of a distance-3 ( d = 3 ) bit-flip surface code with flux-tunable transmons. We encode each of the 16 computational states that make up the logical state | 0 L ⟩ , and protect them against bit-flip errors by performing repeated Z -basis stabilizer measurements. To infer the logical fidelity for the | 0 L ⟩ state, we average across the 16 computational states and employ two decoding strategies: minimum-weight perfect matching and a recurrent neural network. Our results show a reduction of up to 6.8% in the extracted logical error rate with the use of soft information. Decoding with soft information is widely applicable, independent of the physical qubit platform, and could allow for shorter readout durations, further minimizing logical error rates. Published by the American Physical Society 2024
Quantum error correction enables the preservation of logical qubits with a lower logical error rate than the physical error rate, with performance depending on the decoding method. Traditional error decoding approaches, relying on the binarization (`hardening') of readout data, often ignore valuable information embedded in the analog (`soft') readout signal. We present experimental results showcasing the advantages of incorporating soft information into the decoding process of a distance-three (d=3) bit-flip surface code with transmons. To this end, we use the 3×3 data-qubit array to encode each of the 16 computational states that make up the logical state ∣0L⟩, and protect them against bit-flip errors by performing repeated Z-basis stabilizer measurements. To infer the logical fidelity for the ∣0L⟩ state, we average across the 16 computational states and employ two decoding strategies: minimum weight perfect matching and a recurrent neural network. Our results show a reduction of up to 6.8% in the extracted logical error rate with the use of soft information. Decoding with soft information is widely applicable, independent of the physical qubit platform, and could reduce the readout duration, further minimizing logical error rates.