Hybrid superconductor-semiconductor nanowire Josephson junctions exhibit skewed and \phi_0 ϕ 0 -shifted current phase relations when an in-plane magnetic field is applied along the weak link’s spin-orbit effective field direction. These junctions can have an asymmetric Josephson potential with odd-order nonlinearities. A dominant third-order nonlinearity can be achieved by tuning the magnetic field to a sweet spot. Sweet spots persist when higher order Josephson harmonics are included. This makes it possible to have a single Josephson junction dipole element with three-wave mixing capability, which is favorable for pump-efficient amplification. Electrostatic gate tunability of the semiconductor weak link can make it operable within an extended range of working frequencies, and the inclusion of micromagnets can facilitate near-zero magnetic field operation.
Hybrid superconductor-semiconductor nanowire Josephson junctions exhibit skewed and \phi_0 ϕ 0 -shifted current phase relations when an in-plane magnetic field is applied along the weak link’s spin-orbit effective field direction. These junctions can have an asymmetric Josephson potential with odd-order nonlinearities. A dominant third-order nonlinearity can be achieved by tuning the magnetic field to a sweet spot. Sweet spots persist when higher order Josephson harmonics are included. This makes it possible to have a single Josephson junction dipole element with three-wave mixing capability, which is favorable for pump-efficient amplification. Electrostatic gate tunability of the semiconductor weak link can make it operable within an extended range of working frequencies, and the inclusion of micromagnets can facilitate near-zero magnetic field operation.
Superconductor-semiconductor hybrid materials have been extensively used for experiments on electrically tunable quantum devices. Notably, Josephson junctions utilizing nanowire weak links have enabled a number of new gate-tunable qubits, including gatemons, Andreev level qubits and spin qubits. Conversely, superconducting parametric amplifiers based on Josephson junctions have not yet been implemented using nanowires, even though such nearly quantum limited amplifiers are key elements in experiments on quantum circuits. Here we present Josephson parametric amplifiers based on arrays of parallel InAs nanowires that feature a large critical current as required for linear amplification. The resonance frequency of the devices is gate-tunable by almost 1 GHz, with a gain exceeding 20 dB in multiple frequencies and noise approaching the quantum-limit. This new platform enables on-chip integration of gate-tunable qubits with quantum limited amplifiers using the same hybrid materials and on any substrate.
Nearly quantum limited Josephson parametric amplifiers (JPAs) are essential components in superconducting quantum circuits. However, higher order nonlinearities of the Josephson cosine potential are known to cause gain compression, therefore limiting scalability. In an effort to reduce the fourth order, or Kerr nonlinearity, we realize a parametric amplifier with an Al-InAs superconductor–semiconductor hybrid Josephson junction (JJ). We extract the Kerr nonlinearity of the Al-InAs JJ from two different devices and show that it is three orders of magnitude lower compared to an Al-AlOX junction with identical Josephson inductance. We then demonstrate a four-wave-mixing (4WM) parametric amplifier made with an Al-InAs junction that achieves more than 20 dB of gain and −119 dBm of compression power, which outperforms single resonant JPAs based on Al junctions.
Controlling the current-phase relation (CPR) of Josephson elements is essential for tailoring the eigenstates of superconducting qubits, tuning the properties of parametric amplifiers, and designing nonreciprocal superconducting devices. Here, we introduce the hybrid Josephson rhombus, a highly tunable superconducting circuit containing four semiconductor-superconductor hybrid Josephson junctions embedded in a loop. Combining magnetic frustration with gate-voltage-controlled tuning of individual Josephson couplings provides deterministic control of the harmonic content of the rhombus CPR. We show that, for balanced Josephson couplings at full frustration, the hybrid rhombus displays a π -periodic cos ( 2 φ ) potential, indicating coherent charge- 4 e transport. Tuning away from the balanced configuration, we observe a superconducting diode effect with efficiency exceeding 25%. These results showcase the potential of hybrid Josephson rhombi as fundamental building blocks for noise-resilient qubits and quantum devices with custom transport properties.
Near-quantum-limited amplifiers are essential building blocks for high-fidelity readout of superconducting qubits. Josephson parametric amplifiers (JPAs) have been developed to achieve this ultra-low-noise performance [1] in the last two decades by exploiting the quartic term in the nonlinear energy-phase relation of Al-AlO X superconductor-insulator-superconductor Josephson Junctions (SIS JJs). An ongoing research focus is to enhance JPAs’ compression power for processing readout signals in large-scale quantum processors. One approach is to optimize circuit designs to minimize parasitic higher-order nonlinear terms while preserving the quartic nonlinearity for the amplification process. An alternative approach is to make use of new types of JJ devices with small quartic nonlinearity such that parasitic nonlinearities are inherently even lower. Here, we demonstrate that superconductor-semiconductor-superconductor (SSmS) JJs, realized with Al-InAs heterostructures are a promising device to realize quantum-limited amplifiers for superconducting quantum computing. Al-InAs JJs have been used to realize qubits [2] , voltage-tunable resonators [3] , and parametric amplifiers [4] by exploiting critical current tunability via gate voltage ( Fig. 1(a–b) ). In this work, for the first time, we experimentally studied the nonlinear energy-phase relation of Al-InAs JJs and revealed their inherently low quartic nonlinearity. Next, we demonstrate a four-wave-mixing (4WM) parametric amplifier made with an Al-InAs junction that achieves greater than 20 dB of gain, 6 MHz of bandwidth and −119 dBm of compression power.
Nonlinear microwave resonators are a versatile tool in quantum information processing, enabling parametric amplification, continuous variable quantum computing, and engineered mode interactions. Many of these applications especially benefit from cubic nonlinearities enabling three-wave mixing; at the same time, they are limited by quartic nonlinearities giving rise to undesired Kerr effects. A recurrent challenge is therefore to engineer resonators with a finite cubic nonlinearity while suppressing quartic terms. Here, we investigate a superconducting resonator hosting two weak links fabricated from an aluminum-capped indium arsenide nanowire. We characterize the Kerr nonlinearity as a function of magnetic flux and gate bias, showing that it can be tuned to zero with either control parameter. Furthermore, we experimentally demonstrate three-wave mixing in a semiconductor-superconductor hybrid device, establishing nonzero cubic nonlinearity. An effective model based on Andreev bound states qualitatively captures the observed trends. Our results validate semiconductor-superconductor hybrid devices as a promising platform for tunable nonlinear superconducting circuits, with applications in parametric amplification, quantum control of bosonic modes, and engineering interactions between microwave modes.
Parametric conversion and amplification based on three-wave mixing are powerful primitives for efficient quantum operations. For superconducting qubits, such operations can be realized with a quadrupole Josephson junction element, the Josephson Ring Modulator, which behaves as a loss-less three-wave mixer. However, combining multiple quadrupole elements is a difficult task so it would be advantageous to have a three-wave dipole element that could be tessellated for increased power handling and/or information throughput. Here, we present a dipole circuit element with third-order nonlinearity, which implements three-wave mixing. Experimental results for a non-degenerate amplifier based on the proposed third-order nonlinearity are reported.