Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2503.18772

Characterization of a quantum bus between two driven qubits

Alberto Hijano, Henri Lyyra, Juha T. Muhonen, Tero Tapio Heikkilä

Published Mar 24, 2025• 0 citations
arXivHTMLPDF

Abstract

We investigate the use of driven qubits coupled to a harmonic oscillator to implement a $\sqrt{i\mathrm{SWAP}}$-gate. By dressing the qubits through an external driving field, the qubits and the harmonic oscillator can be selectively coupled, allowing for the measurement of individual qubit states, as well as leading to effective qubit-qubit interactions. We compare the qubit readout on bare and dressed qubits, and demonstrate that when coupled to low-frequency resonators, dressed qubits provide a more robust readout than bare qubits in the presence of damping and thermal effects. Furthermore, we study the impact of various system parameters on the fidelity of the two-qubit gate, identifying an optimal range for quantum computation. Our findings guide the implementation of high-fidelity quantum gates in experimental setups, for example those employing nanoscale mechanical resonators.

DOI
10.48550/arxiv.2503.18772

Related papers

Characterization of a quantum bus between two driven qubits

Alberto Hijano, Henri Lyyra, Juha T. Muhonen +1 more

We investigate the use of driven qubits coupled to a harmonic oscillator to implement a i SWAP gate. By dressing the qubits through an external driving field, the qubits and the harmonic oscillator can be selectively coupled, allowing for the measurement of individual qubit states, as well as leading to effective qubit-qubit interactions. We compare the qubit readout on bare and dressed qubits, and demonstrate that when coupled to low-frequency resonators, dressed qubits provide a more robust readout than bare qubits in the presence of damping and thermal effects. Furthermore, we study the impact of various system parameters on the fidelity of the two-qubit gate, identifying an optimal range for quantum computation. Our findings guide the implementation of high-fidelity quantum gates in experimental setups, for example, those employing nanoscale mechanical resonators.

Physical Review Research•Dec 4, 2025•1 citation

Amplification and attenuation of a probe signal by doubly dressed states

Sergey N Shevchenko, G. Oelsner, Ya. S. Greenberg +6 more

We analyze a system composed of a qubit coupled to the electromagnetic fields in two high quality quantum oscillators. A particular realization of such a system is the superconducting qubit coupled to a transmission-line resonator driven by two signals with frequencies close to the resonator's harmonics. This doubly driven system can be described in terms of the doubly dressed qubit states. Our calculations demonstrate the possibility to change the number of photons in the resonator and the transmission of the fundamental-mode signal over a wide parameter range exploiting resonances with the dressed qubit. Experiments show that in the case of high quality resonators the dressed energy levels and corresponding resonance conditions can be probed, even for high driving amplitudes. The interaction of the qubit with photons of two harmonics can be used for the creation of quantum amplifiers or attenuators.

arXiv:1309.2619•Physical Review B•May 8, 2014•36 citations

Prediction of Short Time Qubit Readout via Measurement of the Next Quantum Jump of a Coupled Damped Driven Harmonic Oscillator

Massimo Porrati B, Seth Putterman

The dynamics of the next quantum jump for a qubit [two level system] coupled to a readout resonator [damped driven harmonic oscillator] is calculated. A quantum mechanical treatment of readout resonator reveals nonexponential short time behavior which could facilitate detection of the state of the qubit faster than the resonator lifetime.

arXiv:2006.11950•Physical Review Letters•Dec 21, 2020•3 citations

Analysis of a parametrically driven exchange-type gate and a two-photon excitation gate between superconducting qubits

Marco Roth, Marc Ganzhorn, Nikolaj Moll +3 more

A current bottleneck for quantum computation is the realization of high-fidelity two-qubit quantum operations between two or more quantum bits in arrays of coupled qubits. Gates based on parametrically driven tunable couplers offer a convenient method to entangle multiple qubits by selectively activating different interaction terms in the effective Hamiltonian. Here, we theoretically and experimentally study a superconducting qubit setup with two transmon qubits connected via a capacitively coupled tunable bus. We develop a time-dependent Schrieffer-Wolff transformation and derive analytic expressions for exchange-interaction gates swapping excitations between the qubits (iswap) and for two-photon gates creating and annihilating simultaneous two-qubit excitations (bswap). We find that the bswap gate is generally slower than the more commonly used iswap gate, but features favorable scalability properties with less severe frequency-crowding effects, which typically degrade the fidelity in multiqubit setups. Our theoretical results are backed by experimental measurements as well as exact numerical simulations including the effects of higher transmon levels and dissipation.

arXiv:1708.02090•Physical Review A•Dec 20, 2017•90 citations

Cavity Mediated Two-Qubit Gate: Tuning to Optimal Performance with NISQ Era Quantum Simulations

Shreekanth S. Yuvarajan, Vincent Iglesias-Cardinale, David Hucul +1 more

A variety of photon-mediated operations are critical to the realization of scalable quantum information processing platforms and their accurate characterization is essential for the identification of optimal regimes and their experimental realizations. Such light-matter interactions are often studied with a broad variety of analytical and computational methods that are constrained by approximation techniques or by computational scaling. Quantum processors present a new avenue to address these challenges. We consider the case of cavity mediated two-qubit gates. To investigate quantum state transfer between the qubits, we implement simulations with quantum circuits that are able to reliably track the dynamics of the system. Our quantum algorithm, compatible with NISQ (Noisy Intermediate Scale Quantum) era systems, allows us to map out the fidelity of the state transfer operation between qubits as a function of a broad range of system parameters including the respective detunings between the qubits and the cavity, the damping factor of the cavity, and the respective couplings between the qubits and the cavity. The algorithm provides a robust and intuitive solution, alongside a satisfactory agreement with analytical solutions or classical simulation algorithms in their respective regimes of validity. It allows us to identify under-explored regimes of optimal performance, relevant for heterogeneous quantum platforms, where the two-qubit gate can be rather effective between far-detuned qubits that are neither resonant with each other nor with the cavity. Besides its present application, the method introduced in the current paper can be efficiently used in otherwise untractable variations of the model and in various efforts to simulate and optimize photon-mediated two-qubit gates and other relevant operations in quantum information processing.

quant-pharXiv:2512.12030•Physical Review Research•Dec 16, 2025•0 citations

Theory, modeling and simulation of superconducting qubits

G. P. Berman, D. I. Kamenev, Alexander Chumak +2 more

We analyze the dynamics of a qubit-resonator system coupled with a thermal bath and external electromagnetic fields. Using the evolution equations for the set of Heisenberg operators that describe the whole system, we derive an expression for the resonator field, that includes the resonator-drive, the resonator-bath, and resonator-qubit interactions. The renormalization of the resonator frequency, caused by the qubit-resonator interaction, is accounted for. Using the solutions for the resonator field, we derive the equation that describes the qubit dynamics. The dependence of the qubit evolution during the measurement time on the fidelity of a single-shot measurement is studied. The relation between the fidelity and measurement time is shown explicitly. We proposed a novel adiabatic method for the phase qubit measurement. The method utilizes a low-frequency, quasi-classical resonator inductively coupled to the qubit. The resonator modulates the qubit energy, and the back reaction of the qubit causes a shift in the phase of the resonator. The resonator phase shift can be used to determine the qubit state. We have simulated this measurement taking into the account the energy levels outside the phase qubit manifold. We have shown that, for qubit frequencies in the range of 8-12GHZ, a resonator frequency of 500 MHz and a measurement time of 100 ns, the phase difference between the two qubit states is greater than 0.2 rad. This phase difference exceeds the measurement uncertainty, and can be detected using a classical phase-meter. A fidelity of 0.9999 can be achieved for a relaxation time of 0.5 ms. We also model and simulate a microstrip-SQUID amplifier of frequency about 500 MHz, which could be used to amplify the resonator oscillations in the phase qubit adiabatic measurement. The voltage gain and the amplifier noise temperature are calculated. We simulate the preparation of a generalized Bell state and compute the relaxation times required for achieving high fidelities. We consider two capacitively coupled phase qubits similar to that used in the experimental work of R. Bialczak et al. (Nature Physics, 6, 409, 2010). The Bell state was created using a NOT gate and a universal entangling gate. We solved the equation of motion for the density matrix with the Bloch relaxation times, T{sub 1} and T{sub 2}. For every qubit we took into consideration all the states in the shallow well including the states outside the qubit manifold. Also we took into consideration unwanted interaction between the qubits during the application of the NOT gate. The NOT gate was implemented using a Gaussian pulse assuming the frequency difference between the two qubits is 200 MHz. An entangling gate was implemented reducing this frequency difference to zero. We have found the optimal parameters for the Gaussian pulse and the optimal duration for the entangling gate. We have shown that the maximum fidelity of 0.99 can be achieved for the minimum relaxation time, T{sub 1} = 1.2 {micro}s, if T{sub 2} = 2T{sub 1}. By slightly increasing the required value of T{sub 1}, one can sharply reduce the required value for T{sub 2}.

•Jan 13, 2011•0 citations
We investigate the use of driven qubits coupled to a harmonic oscillator to implement a iSWAP\sqrt{i\mathrm{SWAP}}iSWAP​-gate. By dressing the qubits through an external driving field, the qubits and the harmonic oscillator can be selectively coupled, allowing for the measurement of individual qubit states, as well as leading to effective qubit-qubit interactions. We compare the qubit readout on bare and dressed qubits, and demonstrate that when coupled to low-frequency resonators, dressed qubits provide a more robust readout than bare qubits in the presence of damping and thermal effects. Furthermore, we study the impact of various system parameters on the fidelity of the two-qubit gate, identifying an optimal range for quantum computation. Our findings guide the implementation of high-fidelity quantum gates in experimental setups, for example those employing nanoscale mechanical resonators.
We investigate the use of driven qubits coupled to a harmonic oscillator to implement a i SWAP gate. By dressing the qubits through an external driving field, the qubits and the harmonic oscillator can be selectively coupled, allowing for the measurement of individual qubit states, as well as leading to effective qubit-qubit interactions. We compare the qubit readout on bare and dressed qubits, and demonstrate that when coupled to low-frequency resonators, dressed qubits provide a more robust readout than bare qubits in the presence of damping and thermal effects. Furthermore, we study the impact of various system parameters on the fidelity of the two-qubit gate, identifying an optimal range for quantum computation. Our findings guide the implementation of high-fidelity quantum gates in experimental setups, for example, those employing nanoscale mechanical resonators.
We analyze a system composed of a qubit coupled to the electromagnetic fields in two high quality quantum oscillators. A particular realization of such a system is the superconducting qubit coupled to a transmission-line resonator driven by two signals with frequencies close to the resonator's harmonics. This doubly driven system can be described in terms of the doubly dressed qubit states. Our calculations demonstrate the possibility to change the number of photons in the resonator and the transmission of the fundamental-mode signal over a wide parameter range exploiting resonances with the dressed qubit. Experiments show that in the case of high quality resonators the dressed energy levels and corresponding resonance conditions can be probed, even for high driving amplitudes. The interaction of the qubit with photons of two harmonics can be used for the creation of quantum amplifiers or attenuators.
A current bottleneck for quantum computation is the realization of high-fidelity two-qubit quantum operations between two or more quantum bits in arrays of coupled qubits. Gates based on parametrically driven tunable couplers offer a convenient method to entangle multiple qubits by selectively activating different interaction terms in the effective Hamiltonian. Here, we theoretically and experimentally study a superconducting qubit setup with two transmon qubits connected via a capacitively coupled tunable bus. We develop a time-dependent Schrieffer-Wolff transformation and derive analytic expressions for exchange-interaction gates swapping excitations between the qubits (iswap) and for two-photon gates creating and annihilating simultaneous two-qubit excitations (bswap). We find that the bswap gate is generally slower than the more commonly used iswap gate, but features favorable scalability properties with less severe frequency-crowding effects, which typically degrade the fidelity in multiqubit setups. Our theoretical results are backed by experimental measurements as well as exact numerical simulations including the effects of higher transmon levels and dissipation.
A variety of photon-mediated operations are critical to the realization of scalable quantum information processing platforms and their accurate characterization is essential for the identification of optimal regimes and their experimental realizations. Such light-matter interactions are often studied with a broad variety of analytical and computational methods that are constrained by approximation techniques or by computational scaling. Quantum processors present a new avenue to address these challenges. We consider the case of cavity mediated two-qubit gates. To investigate quantum state transfer between the qubits, we implement simulations with quantum circuits that are able to reliably track the dynamics of the system. Our quantum algorithm, compatible with NISQ (Noisy Intermediate Scale Quantum) era systems, allows us to map out the fidelity of the state transfer operation between qubits as a function of a broad range of system parameters including the respective detunings between the qubits and the cavity, the damping factor of the cavity, and the respective couplings between the qubits and the cavity. The algorithm provides a robust and intuitive solution, alongside a satisfactory agreement with analytical solutions or classical simulation algorithms in their respective regimes of validity. It allows us to identify under-explored regimes of optimal performance, relevant for heterogeneous quantum platforms, where the two-qubit gate can be rather effective between far-detuned qubits that are neither resonant with each other nor with the cavity. Besides its present application, the method introduced in the current paper can be efficiently used in otherwise untractable variations of the model and in various efforts to simulate and optimize photon-mediated two-qubit gates and other relevant operations in quantum information processing.
We analyze the dynamics of a qubit-resonator system coupled with a thermal bath and external electromagnetic fields. Using the evolution equations for the set of Heisenberg operators that describe the whole system, we derive an expression for the resonator field, that includes the resonator-drive, the resonator-bath, and resonator-qubit interactions. The renormalization of the resonator frequency, caused by the qubit-resonator interaction, is accounted for. Using the solutions for the resonator field, we derive the equation that describes the qubit dynamics. The dependence of the qubit evolution during the measurement time on the fidelity of a single-shot measurement is studied. The relation between the fidelity and measurement time is shown explicitly. We proposed a novel adiabatic method for the phase qubit measurement. The method utilizes a low-frequency, quasi-classical resonator inductively coupled to the qubit. The resonator modulates the qubit energy, and the back reaction of the qubit causes a shift in the phase of the resonator. The resonator phase shift can be used to determine the qubit state. We have simulated this measurement taking into the account the energy levels outside the phase qubit manifold. We have shown that, for qubit frequencies in the range of 8-12GHZ, a resonator frequency of 500 MHz and a measurement time of 100 ns, the phase difference between the two qubit states is greater than 0.2 rad. This phase difference exceeds the measurement uncertainty, and can be detected using a classical phase-meter. A fidelity of 0.9999 can be achieved for a relaxation time of 0.5 ms. We also model and simulate a microstrip-SQUID amplifier of frequency about 500 MHz, which could be used to amplify the resonator oscillations in the phase qubit adiabatic measurement. The voltage gain and the amplifier noise temperature are calculated. We simulate the preparation of a generalized Bell state and compute the relaxation times required for achieving high fidelities. We consider two capacitively coupled phase qubits similar to that used in the experimental work of R. Bialczak et al. (Nature Physics, 6, 409, 2010). The Bell state was created using a NOT gate and a universal entangling gate. We solved the equation of motion for the density matrix with the Bloch relaxation times, T{sub 1} and T{sub 2}. For every qubit we took into consideration all the states in the shallow well including the states outside the qubit manifold. Also we took into consideration unwanted interaction between the qubits during the application of the NOT gate. The NOT gate was implemented using a Gaussian pulse assuming the frequency difference between the two qubits is 200 MHz. An entangling gate was implemented reducing this frequency difference to zero. We have found the optimal parameters for the Gaussian pulse and the optimal duration for the entangling gate. We have shown that the maximum fidelity of 0.99 can be achieved for the minimum relaxation time, T{sub 1} = 1.2 {micro}s, if T{sub 2} = 2T{sub 1}. By slightly increasing the required value of T{sub 1}, one can sharply reduce the required value for T{sub 2}.