Magic state cultivation is a leading approach for generating the resource states required for fault-tolerant quantum computation. Here we present a cultivation protocol that increases the success probability of magic state generation in platforms with flexible and nonlocal connectivity. Our method implements cultivation directly on the surface code, avoiding the detour through alternative, less efficient error-correcting codes used in prior approaches. This both improves the acceptance rate and preserves compatibility with the geometry of the code and the hardware. Numerical simulations show that our protocols improve success probabilities and reduce output error rates compared with protocols tailored to locally connected platforms. Under realistic noise models for cold-atom and trapped-ion systems, we improve the rate of magic state generation by more than a factor of 20. Finally, we study qubit loss and erasure and show that very low error rates can be achieved with minimal overhead, reaching below 10 − 6 infidelity using only nine physical erasure qubits.
Magic state cultivation is a leading approach for generating the resource states required for fault-tolerant quantum computation. Here we present a cultivation protocol that increases the success probability of magic state generation in platforms with flexible and nonlocal connectivity. Our method implements cultivation directly on the surface code, avoiding the detour through alternative, less efficient error-correcting codes used in prior approaches. This both improves the acceptance rate and preserves compatibility with the geometry of the code and the hardware. Numerical simulations show that our protocols improve success probabilities and reduce output error rates compared with protocols tailored to locally connected platforms. Under realistic noise models for cold-atom and trapped-ion systems, we improve the rate of magic state generation by more than a factor of 20. Finally, we study qubit loss and erasure and show that very low error rates can be achieved with minimal overhead, reaching below 10 − 6 infidelity using only nine physical erasure qubits.
Erasure qubits constitute a promising approach for tackling the daunting resources required for fault-tolerant quantum computing. By heralding of erasure errors, both the error-correction threshold and the sub-threshold scaling of the logical error rate are significantly improved. While previous research has focused primarily on fault-tolerant quantum memories, we extend this investigation to magic state injection—a critical yet resource-intensive component of fault-tolerant quantum computation. We show that, after postselection on erasures, the logical error rate of the injected magic state is set by the residual Pauli error, while the space-time overhead is only marginally increased as compared with the case of non-erasure qubits with a similar noise strength. These conclusions hold both for injection into the surface code and for injection and cultivation on the color code. For the former, we show that most of the gains can be achieved by the use of just three strategically placed erasure qubits in the surface code patch, independent of the patch size. For the latter, in contrast, it is beneficial to have all the qubits in the cultivation patch be erasure qubits. Our results for cultivation suggest that algorithmically relevant logical error rates may be within reach magic state distillation for erasure rates ≲ 4 × 10 − 3 and residual Pauli error rates of ∼ 10 − 4 .
Fault-tolerant quantum computing requires a universal gate set, but the necessary non-Clifford gates represent a significant resource cost for most quantum error correction architectures. Magic state cultivation offers an efficient alternative to resource-intensive distillation protocols; however, testing the proposal's assumptions represents a challenging departure from quantum memory experiments. We present an experimental study of magic state cultivation on a superconducting quantum processor. We implement cultivation, including code-switching into a surface code, and develop a fault-tolerant measurement protocol to bound the magic state fidelity. Cultivation reduces the error by a factor of 40, with a state fidelity of 0.9999(1) (retaining 8% of attempts). Our results experimentally establish magic state cultivation as a viable solution to one of quantum computing's most significant challenges.
Fault-tolerant quantum computing requires high-fidelity logical magic states for implementing non-Clifford operations. Magic-state cultivation provides a lower-overhead route to logical magic-state preparation, but its efficiency is limited by postselection loss during the early injection-and-cultivation stages. In this work, we propose an in-patch multiplexing scheme that uses early-stage idle resources within a single logical patch to create multiple local cultivation opportunities. A candidate that passes the early stages is forwarded to the standard escape pathway, while the escape stage and the decoder-based acceptance procedure are kept identical to those of the single-site baseline. Under a uniform depolarizing noise model with idle noise, the proposed protocol substantially reduces the injection-and-cultivation discard rate and the expected number of attempts required to obtain an accepted early-stage candidate. At a physical error rate of p=2×10−3, the injection-and-cultivation expected attempts are reduced by 45.46% for d1=3 and by 72.91% for d1=5, relative to the single-site MSC baseline. In the direct full-cycle evaluation including escape, the expected attempts per kept logical output are further reduced by 49.04% for d1=3 and by 78.69% for d1=5 at the same physical error rate. The full-cycle cost curves are shifted toward smaller expected attempts, while the final logical-error behavior remains governed by the escape-stage gap threshold. These results show that in-patch multiplexing can reduce postselection overhead while preserving the standard magic-state cultivation framework.
Preparation of high-fidelity logical magic states is crucial for fault-tolerant quantum computation. Among previous attempts to reduce the substantial cost of magic state preparation, magic state cultivation (MSC) [Gidney , Magic state cultivation: growing T states as cheap as CNOT gates, arXiv:2409.17595], a recently proposed protocol for logical T state preparation without magic state distillation, achieves state-of-the-art efficiency. Inspired by this work [Gidney , Magic state cultivation: growing T states as cheap as CNOT gates, arXiv:2409.17595], we propose a MSC procedure that can produce logical T states on the rotated surface code at a further reduced cost. To maintain high efficiency throughout our protocol, we design structured codes along with compact circuits bridging between them. More specifically, we construct a code family, the RP code, by putting the rotated surface code on R P 2 (a two-dimensional manifold), as well as two self-dual Calderbank-Shor-Steane codes, named SRP-3 and SRP-5, respectively. In our MSC protocol, we start with a cultivation process, in which a high-fidelity T state is prepared on a small RP code with distance 3 or 5. Then, to preserve the logical T state, we use an efficient and easy-to-decode expansion stage to grow a small RP code to a larger rotated surface code in one syndrome extraction (SE) round. The RP code serves as an efficient transfer station with efficient SE circuits and compact interfaces between the SRP-3 (or SRP-5) code—used in the cultivation process to efficiently verify the correctness of the logical T state—and larger rotated surface codes for preserving the prepared logical T state. Our MSC protocol utilizes nonlocal connectivity, available on both neutral atom array and ion trap platforms. According to our Monte Carlo sampling results, our MSC protocol requires about an order of magnitude smaller space-time volume to reach a target logical error rate of around 10 − 9 compared to the original MSC protocol.
Multiple quantum computing platforms across neutral atoms [1], nitrogen vacancy centres [2, 3], gate-defined dots [4-6] and 14|15 phosphorus atom qubits [7, 8] in silicon are experimentally exploring the use of high connectivity qubits, beyond that of nearest-neighbour planar lattices. Theoretical works consider modifications to fault-tolerant codes to leverage this higher qubit connectivity, such as non-local LDPC codes [9], inspiring superconducting [10] and photonic [11] platforms to also seek non-planar connectivity. In addition, separate theoretical works consider biased noise, where bit- and phase-flip errors are not equally likely. In this work, we present efficient methods for implementing 6.6.6 and 4.8.8 colour codes, as well as bilayer and folded surface codes, using two-qubit registers. We also leverage noise bias to avoid hook errors, demonstrating comparable performance to the surface code. By combining colour and bilayer codes, we show how magic state cultivation procedures [12-14] can be improved, in a procedure we refer to as the Magic Scroll. Not only does the Magic Scroll escape to a standard surface code, it also improves cultivation volumes by 3x and supports magic ∣T⟩ state fidelities as low as 10−9. We show that this technique can be further leveraged to improve distillation performance, showing a 3x improvement to distillation volumes for error rates of ∼10−15. Through these constructions, we demonstrate techniques to leverage noise bias and high qubit connectivity, showing how register-based architectures can improve error rates and reduce quantum volumes in fault-tolerant quantum computing.
Magic state cultivation is a promising method for preparing high-fidelity non-Clifford resource states - a central component of fault-tolerant quantum computing - with low spacetime overhead. In benchmarking cultivation, existing resource estimates assume access to noiseless transversal measurement of the output magic state to allow for postselection during the final escape stage of the cultivation process. However, such measurements would destroy the magic state and are therefore unavailable during computation. We develop an open-boundary postselection method, Caliper, that uses only nondestructive mid-circuit syndrome information and substantially outperforms existing methods operating under these constraints. In some regimes, our postselection method uniquely recovers the resource efficiency of prior estimates. However, in other cases, we observe a tradeoff. At spacetime costs reported in previous works, the achievable logical error rates can be orders of magnitude higher, and recovering the reported logical error rate requires substantially larger codes and longer escape stages. Our results highlight how practical considerations involving mid-circuit postselection can impact the design and performance of magic state cultivation protocols.