Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2502.01462 · Physical Review Letters

Enhancing Quantum Metrology by Quantum Resonance Dynamics

Zhixing Zou, Jiangbin Gong, Weitao Chen

Published May 28, 2025• 7 citations
arXivHTMLPDF

Abstract

Quantum effects in metrology can in principle enhance measurement precision from the so-called standard quantum limit to the Heisenberg limit. Further advancements in quantum metrology largely rely on innovative metrology protocols that can avoid a number of known obstacles, including the challenge of preparing entangled states with sufficient fidelity, the readout noise in measuring highly entangled states, and no-go theorems for quantum metrology under noisy environments. In this Letter, exploiting some peculiar but experimentally feasible dynamical features of a collection of spins with all-to-all time-periodic interactions, we propose a metrology protocol that can circumvent all three mentioned obstacles and yet still make good use of time as a resource for metrology. Specifically, by mapping the dynamics of such a periodically driven spin system to that of a paradigm of quantum chaos but tuned to some high-order quantum resonance, it is shown that a simple SU(2) coherent state can, after evolving to highly entangled states in the ensuing dynamics, be dynamically brought back to the same initial coherent state. The associated quantum Fisher information is found to exhibit quadratic scaling with both the number of spins and the duration of the metrology protocol. The achieved Heisenberg scaling can also largely survive in the presence of Markovian noise. Representing a previously unknown strategy for quantum metrology, the protocol proposed here can be tested on available experimental platforms.

DOI
10.1103/lkrt-lvng

Related papers

Quantum metrology with partially accessible chaotic sensors

Harshita Sharma, Sayan Choudhury, Jayendra N. Bandyopadhyay

Most quantum metrology protocols harness highly entangled probe states and globally accessible measurements to surpass the standard quantum limit. However, it is challenging to satisfy these requirements in realistic many-body sensors. We demonstrate that both of these constraints can be overcome in quantum chaotic sensors. Crucially, we establish that even in the presence of partial measurement accessibility, chaotic dynamics enables initial unentangled states to exhibit Heisenberg scaling of the quantum Fisher information, $I_α$ with time. In the weakly chaotic regime, we identify spin-coherent states placed at the edge of the regular islands in the mixed classical phase space as optimal initial states for enhanced sensitivity. On the other hand, in the strongly chaotic regime, $I_α$ is insensitive to the choice of the initial state. Notably, quantum-enhanced sensitivity is achieved even when a very low fraction ($\sim 5\%$) of the qubits are accessible. These results establish quantum chaos as a robust resource for quantum-enhanced sensing under realistic accessibility constraints on accessibility.

quant-pharXiv:2602.12914•Feb 16, 2026•0 citations

Achieving Heisenberg scaling by probe-ancilla interaction in quantum metrology

Jingyi Fan, Shengshi Pang

The Heisenberg scaling is an ultimate precision limit of parameter estimation allowed by the principles of quantum mechanics, with no counterpart in the classical realm, and has been a long-pursued goal in quantum metrology. It has been known that interactions between the probes can help reach the Heisenberg scaling without entanglement. In this paper, we show that interactions between the probes and the additional dimensions of an ancillary system may also increase the precision of parameter estimation to surpass the standard quantum limit and attain the Heisenberg scaling without entanglement, if the measurement scheme is properly designed. The quantum Fisher information exhibits periodic patterns over the evolution time, implying the existence of optimal time points for measurements that can maximize the quantum Fisher information. By implementing optimizations over the Hamiltonian, the initial states of the probes and the ancillary system, the interaction strength, and the time points for measurements, our protocol achieves the Heisenberg scaling for the parameter of the probe Hamiltonian, in terms of both evolution time and probe number. Our protocol features two aspects: (i) the Heisenberg scaling can be achieved by a product state of the probes and (ii) mere local measurement on the ancilla is sufficient, both of which reduce the quantum resources and the implementation complexity to achieve the Heisenberg scaling. The paper is concluded by the investigation of the effects of noise on this protocol.

arXiv:2407.16880•Physical Review A•Dec 3, 2024•6 citations

Restoring Heisenberg-Limited Precision in Non-Markovian Open Quantum Systems via Dynamical Decoupling

Bakmou Lahcen, Ke Zeng, Yu Jiang +1 more

Non-classical resources enable measurements to achieve a precision that exceeds the limits predicted by the central limit theorem. However, environmental noise arising from system-environment interactions severely limits the performance of such resources through decoherence. While significant progress has been made in mitigating Markovian noise, the extent to which non-Markovian noise can be mitigated remains poorly understood. We demonstrate that Heisenberg Scaling, the ultimate quantum limit on measurement precision, can be recovered in quantum metrology under non-Markovian noise by leveraging carefully designed Dynamical Decoupling Techniques. Importantly, our approach does not rely on assumptions of Markovian dynamics. By imposing appropriate conditions on the control Hamiltonian, we show that HS can be achieved irrespective of whether the noise is Markovian or non-Markovian. We also prove necessary and sufficient conditions for the existence of such control Hamiltonians. As an illustrative example, we apply our framework to the damped Jaynes-Cummings model, successfully mitigating memory effects and maintaining measurement precision in complex, non-Markovian environments. These findings highlight the power of quantum control to overcome decoherence challenges and enhance metrological performance in realistic, noisy quantum systems.

arXiv:2501.01917•Qeios•Feb 1, 2025•0 citations

Quantum Metrology Enhanced by Leveraging Informative Noise with Error Correction

Hongzhen Chen, Yu Chen, Jing Liu +2 more

The primary challenge in advancing practical quantum technology is the presence of noise, which can lead to decoherence and undermine the advantages of quantum systems. However, it is worth noting that noise can also contain information that can be harnessed to improve performance in certain quantum information tasks. This has been explored for specific types of noise, but the full potential of informative noise within general dynamics remains largely unknown. Here we demonstrate that informative noise can be transformed into a valuable resource for enhancing precision limits in quantum metrology. We provide necessary and sufficient conditions under which the precision achieved in the presence of informative noise can attain Heisenberg scaling. Our research offers a fresh perspective on the role of noise in quantum metrology and opens up avenues for achieving higher precision beyond the previously anticipated ultimate limit.

Physical Review Letters•Nov 7, 2024•11 citations

Quantum metrology via chaos in a driven Bose-Josephson system

Wenjie Liu, Min Zhuang, Bo Zhu +2 more

Entanglement preparation and signal accumulation are essential for quantum parameter estimations, which pose significant challenges to both theories and experiments. Here, we propose how to utilize chaotic dynamics in a periodically driven Bose-Josephson system for achieving high-precision measurements beyond the standard quantum limit (SQL). Starting from an initial nonentangled state, the chaotic dynamics generates many-body quantum entanglement and simultaneously encodes the parameter to be estimated. By using suitable chaotic dynamics, the ultimate measurement precision of the estimated parameter can beat the SQL. The sub-SQL measurement precision scaling can also be reached via specific observables, such as collective spin measurement, which can be realized with state-of-art techniques. Our study not only provides insights for understanding quantum chaos and quantum-classical correspondence, but also of promising applications in entanglement-enhanced quantum metrology.

arXiv:2007.06210•Physical Review A•Feb 8, 2021•18 citations

Heisenberg-Limited Quantum Metrology Using Collective Dephasing

Shingo Kukita, Yuichiro Matsuzaki, Yasushi Kondo

The goal of quantum metrology is the precise estimation of parameters using quantum properties such as entanglement. This estimation usually consists of three steps: state preparation, time evolution during which information of the parameters is encoded in the state, and readout of the state. Decoherence during the time evolution typically degrades the performance of quantum metrology and is considered to be one of the major obstacles to realizing entanglement-enhanced sensing. We show, however, that under suitable conditions, this decoherence can be exploited to improve the sensitivity. Assume that we have two axes, and our aim is to estimate the relative angle between them. Our results reveal that the use of Markovian collective dephasing to estimate the relative angle between the two directions affords Heisenberg-limited sensitivity. Moreover, our protocol based on Markovian collective dephasing is robust against environmental noise: it is possible to achieve the Heisenberg limit by applying the collective dephasing even under the effect of independent dephasing. Our counterintuitive proposal with the decoherence leads to alternative applications in quantum metrology.

arXiv:2103.11612•Physical Review Applied•Dec 10, 2021•10 citations
Quantum effects in metrology can in principle enhance measurement precision from the so-called standard quantum limit to the Heisenberg limit. Further advancements in quantum metrology largely rely on innovative metrology protocols that can avoid a number of known obstacles, including the challenge of preparing entangled states with sufficient fidelity, the readout noise in measuring highly entangled states, and no-go theorems for quantum metrology under noisy environments. In this Letter, exploiting some peculiar but experimentally feasible dynamical features of a collection of spins with all-to-all time-periodic interactions, we propose a metrology protocol that can circumvent all three mentioned obstacles and yet still make good use of time as a resource for metrology. Specifically, by mapping the dynamics of such a periodically driven spin system to that of a paradigm of quantum chaos but tuned to some high-order quantum resonance, it is shown that a simple SU(2) coherent state can, after evolving to highly entangled states in the ensuing dynamics, be dynamically brought back to the same initial coherent state. The associated quantum Fisher information is found to exhibit quadratic scaling with both the number of spins and the duration of the metrology protocol. The achieved Heisenberg scaling can also largely survive in the presence of Markovian noise. Representing a previously unknown strategy for quantum metrology, the protocol proposed here can be tested on available experimental platforms.
Most quantum metrology protocols harness highly entangled probe states and globally accessible measurements to surpass the standard quantum limit. However, it is challenging to satisfy these requirements in realistic many-body sensors. We demonstrate that both of these constraints can be overcome in quantum chaotic sensors. Crucially, we establish that even in the presence of partial measurement accessibility, chaotic dynamics enables initial unentangled states to exhibit Heisenberg scaling of the quantum Fisher information, IαI_αIα​ with time. In the weakly chaotic regime, we identify spin-coherent states placed at the edge of the regular islands in the mixed classical phase space as optimal initial states for enhanced sensitivity. On the other hand, in the strongly chaotic regime, IαI_αIα​ is insensitive to the choice of the initial state. Notably, quantum-enhanced sensitivity is achieved even when a very low fraction (∼5%\sim 5\%∼5%) of the qubits are accessible. These results establish quantum chaos as a robust resource for quantum-enhanced sensing under realistic accessibility constraints on accessibility.
The Heisenberg scaling is an ultimate precision limit of parameter estimation allowed by the principles of quantum mechanics, with no counterpart in the classical realm, and has been a long-pursued goal in quantum metrology. It has been known that interactions between the probes can help reach the Heisenberg scaling without entanglement. In this paper, we show that interactions between the probes and the additional dimensions of an ancillary system may also increase the precision of parameter estimation to surpass the standard quantum limit and attain the Heisenberg scaling without entanglement, if the measurement scheme is properly designed. The quantum Fisher information exhibits periodic patterns over the evolution time, implying the existence of optimal time points for measurements that can maximize the quantum Fisher information. By implementing optimizations over the Hamiltonian, the initial states of the probes and the ancillary system, the interaction strength, and the time points for measurements, our protocol achieves the Heisenberg scaling for the parameter of the probe Hamiltonian, in terms of both evolution time and probe number. Our protocol features two aspects: (i) the Heisenberg scaling can be achieved by a product state of the probes and (ii) mere local measurement on the ancilla is sufficient, both of which reduce the quantum resources and the implementation complexity to achieve the Heisenberg scaling. The paper is concluded by the investigation of the effects of noise on this protocol.
Non-classical resources enable measurements to achieve a precision that exceeds the limits predicted by the central limit theorem. However, environmental noise arising from system-environment interactions severely limits the performance of such resources through decoherence. While significant progress has been made in mitigating Markovian noise, the extent to which non-Markovian noise can be mitigated remains poorly understood. We demonstrate that Heisenberg Scaling, the ultimate quantum limit on measurement precision, can be recovered in quantum metrology under non-Markovian noise by leveraging carefully designed Dynamical Decoupling Techniques. Importantly, our approach does not rely on assumptions of Markovian dynamics. By imposing appropriate conditions on the control Hamiltonian, we show that HS can be achieved irrespective of whether the noise is Markovian or non-Markovian. We also prove necessary and sufficient conditions for the existence of such control Hamiltonians. As an illustrative example, we apply our framework to the damped Jaynes-Cummings model, successfully mitigating memory effects and maintaining measurement precision in complex, non-Markovian environments. These findings highlight the power of quantum control to overcome decoherence challenges and enhance metrological performance in realistic, noisy quantum systems.
The primary challenge in advancing practical quantum technology is the presence of noise, which can lead to decoherence and undermine the advantages of quantum systems. However, it is worth noting that noise can also contain information that can be harnessed to improve performance in certain quantum information tasks. This has been explored for specific types of noise, but the full potential of informative noise within general dynamics remains largely unknown. Here we demonstrate that informative noise can be transformed into a valuable resource for enhancing precision limits in quantum metrology. We provide necessary and sufficient conditions under which the precision achieved in the presence of informative noise can attain Heisenberg scaling. Our research offers a fresh perspective on the role of noise in quantum metrology and opens up avenues for achieving higher precision beyond the previously anticipated ultimate limit.
Entanglement preparation and signal accumulation are essential for quantum parameter estimations, which pose significant challenges to both theories and experiments. Here, we propose how to utilize chaotic dynamics in a periodically driven Bose-Josephson system for achieving high-precision measurements beyond the standard quantum limit (SQL). Starting from an initial nonentangled state, the chaotic dynamics generates many-body quantum entanglement and simultaneously encodes the parameter to be estimated. By using suitable chaotic dynamics, the ultimate measurement precision of the estimated parameter can beat the SQL. The sub-SQL measurement precision scaling can also be reached via specific observables, such as collective spin measurement, which can be realized with state-of-art techniques. Our study not only provides insights for understanding quantum chaos and quantum-classical correspondence, but also of promising applications in entanglement-enhanced quantum metrology.
The goal of quantum metrology is the precise estimation of parameters using quantum properties such as entanglement. This estimation usually consists of three steps: state preparation, time evolution during which information of the parameters is encoded in the state, and readout of the state. Decoherence during the time evolution typically degrades the performance of quantum metrology and is considered to be one of the major obstacles to realizing entanglement-enhanced sensing. We show, however, that under suitable conditions, this decoherence can be exploited to improve the sensitivity. Assume that we have two axes, and our aim is to estimate the relative angle between them. Our results reveal that the use of Markovian collective dephasing to estimate the relative angle between the two directions affords Heisenberg-limited sensitivity. Moreover, our protocol based on Markovian collective dephasing is robust against environmental noise: it is possible to achieve the Heisenberg limit by applying the collective dephasing even under the effect of independent dephasing. Our counterintuitive proposal with the decoherence leads to alternative applications in quantum metrology.