Selective excitation of superconducting qubits with a shared control line through pulse shaping
R. Matsuda, R. Ohira, T. Sumida, H. Shiomi, A. Machino, S. Morisaka, K. Koike, T. Miyoshi, Y. Kurimoto, Y. Sugita, Y. Ito, Y. Suzuki, P. A. Spring, S. Wang, S. Tamate, Y. Tabuchi, Y. Nakamura, K. Ogawa, M. Negoro
In conventional architectures of superconducting quantum computers, each qubit is connected to its own control line, leading to a commensurate increase in the number of microwave lines as the system scales. Frequency-multiplexed qubit control addresses this problem by enabling multiple qubits to share a single microwave line. However, it can cause unwanted excitation of nontarget qubits, especially when the detuning between qubits is smaller than the pulse bandwidth. Here, we propose a selective-excitation-pulse (SEP) technique that suppresses unwanted excitations by shaping a drive pulse to create null points at nontarget qubit frequencies. In a proof-of-concept experiment with three fixed-frequency transmon qubits, we demonstrate that the SEP technique achieves single-qubit gate fidelities comparable to those obtained with conventional Gaussian pulses while effectively suppressing unwanted excitations in nontarget qubits. These results highlight the SEP technique as a promising tool for enhancing frequency-multiplexed qubit control.
In conventional architectures of superconducting quantum computers, each qubit is connected to its own control line, leading to a commensurate increase in the number of microwave lines as the system scales. Frequency-multiplexed qubit control addresses this problem by enabling multiple qubits to share a single microwave line. However, it can cause unwanted excitation of nontarget qubits, especially when the detuning between qubits is smaller than the pulse bandwidth. Here, we propose a selective-excitation-pulse (SEP) technique that suppresses unwanted excitations by shaping a drive pulse to create null points at nontarget qubit frequencies. In a proof-of-concept experiment with three fixed-frequency transmon qubits, we demonstrate that the SEP technique achieves single-qubit gate fidelities comparable to those obtained with conventional Gaussian pulses while effectively suppressing unwanted excitations in nontarget qubits. These results highlight the SEP technique as a promising tool for enhancing frequency-multiplexed qubit control.
Accurate control of qubits is the central requirement for building functional quantum processors. For the current superconducting quantum processor, high-fidelity control of qubits is mainly based on independently calibrated microwave pulses, which could differ from each other in frequencies, amplitudes, and phases. With this control strategy, the needed physical resource could be challenging, especially when scaling up to large-scale quantum processors is considered. Inspired by Kane's proposal for spin-based quantum computing, here, we explore theoretically the possibility of baseband flux control of superconducting qubits with only shared and always-on microwave drives. In our strategy, qubits are by default far detuned from the drive during system idle periods, qubit readout and baseband flux-controlled two-qubit gates can thus be realized with minimal impacts from the always-on drive. By contrast, during working periods, qubits are tuned on resonance with the drive and single-qubit gates can be realized. Therefore, universal qubit control can be achieved with only baseband flux pulses and always-on shared microwave drives. We apply this strategy to the qubit architecture where tunable qubits are coupled via a tunable coupler, and the analysis shows that high-fidelity qubit control is possible. Besides, the baseband control strategy needs fewer physical resources, such as control electronics and cooling power in cryogenic systems, than that of microwave control. Of note, the flexibility of baseband flux control could be employed for addressing the nonuniformity issue of superconducting qubits, potentially allowing the realization of multiplexing and cross-bar technologies and thus controlling large numbers of qubits with fewer control lines. We thus expect that baseband control with shared microwave drives can help build large-scale superconducting quantum processors.
Single-qubit gates on superconducting quantum processors are typically implemented using microwave pulses applied through dedicated control lines. However, these microwave pulses may also drive other qubits due to crosstalk arising from capacitive coupling and wavefunction overlap in systems with closely spaced transition frequencies. Crosstalk and frequency crowding increase errors during simultaneous single-qubit operations relative to isolated gates, thus forming a major bottleneck for scaling superconducting quantum processors. In this work, we combine model-based qubit frequency optimization with pulse shaping to demonstrate crosstalk error mitigation in single-qubit gates on a 49-qubit superconducting quantum processor. We introduce and experimentally verify an analytical model of simultaneous single-qubit gate error caused by microwave crosstalk that depends on a given pulse shape. By employing a model-based optimization strategy of qubit frequencies, we minimize the crosstalk-induced error across the processor and achieve a mean simultaneous single-qubit gate fidelity of 99.96% for a 16-ns gate duration, approaching the mean individual gate fidelity. To further reduce the simultaneous error and required qubit frequency bandwidth on high-crosstalk qubit pairs, we introduce a crosstalk transition suppression (CTS) pulse shaping technique that minimizes the spectral energy around transitions inducing leakage and crosstalk errors. Finally, we combine CTS with model-based frequency optimization across the device and experimentally show a systematic reduction in the required qubit frequency bandwidth for high-fidelity simultaneous gates, supported by simulations of systems with up to 1000 qubits. By alleviating constraints on qubit frequency bandwidth for parallel single-qubit operations, this work represents an important step for scaling towards larger quantum processors.
Achieving precise control over quantum systems presents a significant challenge, especially in many-body setups, where residual couplings and unintended transitions undermine the accuracy of quantum operations. In superconducting qubits, parasitic interactions-both between distant qubits and with spurious two-level systems-can severely limit the performance of quantum gates. In this Letter, we introduce a pulse-shaping technique that uses spectrally balanced microwave pulses to suppress undesired transitions. Experimental results demonstrate an order-of-magnitude reduction in spurious excitations between weakly detuned qubits as well as a substantial decrease in single-qubit gate errors caused by a strongly coupled two-level defect over a broad frequency range. Our method provides a simple yet powerful solution for mitigating adverse effects from parasitic couplings, enhancing quantum gate fidelity. The pulse-shaping technique can be readily adapted to various physical systems.
The increasing number of qubits in quantum processors necessitates a corresponding increase in the number of control lines between the processor, which is typically operated at cryogenic temperatures, and external electronics. Scaling poses significant challenges in terms of the thermal loads, forming a major bottleneck in the realization of large-scale quantum computers. In this study, we analyze simultaneous gate operations on multiple qubits using microwaves transmitted via a single cable in a frequency-division multiplexing (FDM) scheme. By employing rectangular control microwave pulses, we reveal the contribution of drive frequency spacing to gate fidelity. Through theoretical and numerical analyses, we demonstrate that orthogonal and quasi-orthogonal microwave signals suppress interference in simultaneously driven qubits, thereby ensuring high gate fidelity. Additionally, we provide design guidelines for key parameters, including pulse length, number of multiplexed microwave signals, and rotation angle, to achieve precise qubit operations. Our findings enable a scalable FDM-based microwave control scheme suitable for quantum processors with a large number of qubits.
The increasing number of control lines connecting quantum processors to external electronics constitutes a major bottleneck in the realization of large-scale quantum computers. Frequency-division multiplexing is expected to enable control of multiple qubits through a single microwave cable; however, interference from off-resonant microwave tones hinders precise qubit control. Here, we propose an active interference suppression method for frequency-division-multiplexed simultaneous gates on microwave-controlled qubits. We demonstrate that the deliberate incorporation of off-resonant microwave tones improves single-qubit gate fidelity. In particular, the gate infidelity scales inversely with the square of the number of microwave tones when off-resonant orthogonal or quasi-orthogonal tones are incorporated. Furthermore, we show that fast oscillations, neglected under the rotating wave approximation, degrade the gate fidelity, and that this degradation can be mitigated through optimized frequency allocation. The proposed approach is simple and effective for improving the performance of frequency-division-multiplexed quantum gates.
As superconducting quantum processors continue to scale, high-performance quantum control becomes increasingly critical. In densely integrated architectures, unwanted interactions between nearby qubits give rise to crosstalk errors that limit operational performance. In particular, direct exchange-type (XY) interactions are typically minimized by designing large frequency detunings between neighboring qubits at the hardware level. However, frequency crowding in large-scale systems ultimately restricts the achievable frequency separation. While such XY coupling facilitates entangling gate operations, its residual presence poses a key challenge during single-qubit controls. Here, we propose a scalable pulse-level control framework, incorporating frequency modulation (FM) and dynamical decoupling (DD), to suppress XY crosstalk errors. This framework operates independently of coupling strengths, reducing calibration overhead and naturally supporting multi-qubit connectivity. Numerical simulations show orders-of-magnitude reductions in infidelity for both idle and single-qubit gates in a two-qubit system. We further validate scalability in a five-qubit layout, where crosstalk between a central qubit and four neighbors is simultaneously suppressed. Our crosstalk suppression framework provides a practical route toward high-fidelity operation in dense superconducting architectures.