In this work, we introduce new methods for the quantization, decomposition, and extraction (from electromagnetic simulations) of lumped-element circuit models for superconducting quantum devices. Our flux-charge symmetric procedures center on the network matrix, which encodes the connectivity of a circuit's inductive loops and capacitive nodes. First, we use the network matrix to demonstrate a simple algorithm for circuit quantization, giving novel predictions for the Hamiltonians of circuits with both Josephson junctions and quantum phase slip wires. We then show that by performing pivoting operations on the network matrix, we can decompose a superconducting circuit model into its simplest equivalent "fundamental" form, in which the harmonic degrees of freedom are separated out from the Josephson junctions and phase slip wires. Finally, we illustrate how to extract an exact, transformerless circuit model from electromagnetic simulations of a device's hybrid admittance/impedance response matrix, by matching the lumped circuit's network matrix to the network topology of the physical layout. Overall, we provide a toolkit of intuitive methods that can be used to construct, analyze, and manipulate superconducting circuit models.
In this work, we introduce new methods for the quantization, decomposition, and extraction (from electromagnetic simulations) of lumped-element circuit models for superconducting quantum devices. Our flux-charge symmetric procedures center on the network matrix, which encodes the connectivity of a circuit's inductive loops and capacitive nodes. First, we use the network matrix to demonstrate a simple algorithm for circuit quantization, giving novel predictions for the Hamiltonians of circuits with both Josephson junctions and quantum phase slip wires. We then show that by performing pivoting operations on the network matrix, we can decompose a superconducting circuit model into its simplest equivalent "fundamental" form, in which the harmonic degrees of freedom are separated out from the Josephson junctions and phase slip wires. Finally, we illustrate how to extract an exact, transformerless circuit model from electromagnetic simulations of a device's hybrid admittance/impedance response matrix, by matching the lumped circuit's network matrix to the network topology of the physical layout. Overall, we provide a toolkit of intuitive methods that can be used to construct, analyze, and manipulate superconducting circuit models.
In the quest to produce quantum technology, superconducting networks, working at temperatures just above absolute zero, have arisen as one of the most promising physical implementations. The precise analysis and synthesis of such circuits have required merging the fields of physics, engineering, and mathematics. In this dissertation, we develop mathematically consistent and precise Hamiltonian models to describe ideal superconducting networks made of an arbitrary number of lumped elements, such as capacitors, inductors, Josephson and phase-slip junctions, gyrators, etc., and distributed ones like transmission lines. We give formal proofs for the decoupling at high and low frequencies of lumped degrees of freedom from infinite-dimensional systems in different coupling configurations in models based on the effective Kirchhoff's laws. We extend the standard theory to quantize circuits that include ideal nonreciprocal elements all the way to their Hamiltonian descriptions in a systematic way. Finally, we pave the way on how to quantize general frequency-dependent gyrators and circulators coupled to both transmission lines and other lumped-element networks. We have explicitly shown, that these models, albeit ideal, are finite and present no divergence issues. We explain and dispel misunderstandings from the previous literature. Furthermore, we have demonstrated the usefulness of a redundant basis for performing separation of variables of the transmission line (1D) fields in the presence of point-like (lumped-element) couplings by time-reversal symmetry-breaking terms, i.e. nonreciprocal elements.
Building on the first-order circuit quantization method [arXiv:2304.12252, arXiv:2401.09120], we provide simple formulas to construct exact Hamiltonians for Josephson-junction-based superconducting qudits capacitively, inductively, or galvanically coupled to passive linear environments. These environments may be multiport, multimode, discrete or continuous, reciprocal or nonreciprocal, and are characterized directly by their impedance or admittance matrices. In the weak-coupling regime, we further derive \emph{divergence-free} dispersive Hamiltonians for mode-resolved environments and transition-resolved weak-coupling master equations for dissipative continua. Mode structure, frequency renormalizations, environment-mediated interactions, decay rates, and directional cross couplings then follow from the same causal immittance response, while spurious Lamb-shift divergences arising from uncontrolled approximations in previous treatments are made explicit and avoided. We apply the theory to a set of illustrative circuits comprising a discrete resonator filter, finite-band metamaterial environments, nonreciprocal waveguide-QED systems, and superconducting giant atoms, for which analytical response matrices can be obtained, although the method is particularly well suited to numerical responses from electromagnetic solvers or experimental characterization. We thereby extend the black-box quantization framework to multiport, dissipative, and nonreciprocal settings, establishing a simple and scalable route toward optimized and automated electromagnetic design of large-scale superconducting quantum hardware.
We present a method for the numerical analysis of superconducting quantum circuits combining lumped elements, either linear or nonlinear (i.e., Josephson junctions), and distributed coplanar waveguide (CPW) structures. CPW transmission lines and multiline couplers are directly modeled without discretizing them into lumped-element equivalents, and the circuit Hamiltonian parameters are extracted by using the energy-participation ratio (EPR) method. This approach enables fast and accurate extraction of mode frequencies, anharmonicities, cross-Kerr interactions, and Purcell decay rates without relying on full electromagnetic simulations, while naturally accounting for higher-order modes of distributed components. We have implemented the proposed method in a Python framework, QuLTRA (Quantum hybrid Lumped and TRansmission lines circuits Analyzer), which we have used to validate the approach against full electromagnetic simulations (Ansys HFSS, pyEPR), existing circuit-analysis tools (QuCAT), and designs reported in the literature. The comparisons show excellent agreement with orders-of-magnitude reductions in computational time relative to full-wave solvers. We demonstrate applications including Purcell-protected readout, multimode ultrastrong coupling, and multiplexed qubit readout, illustrating how the method can support fast and reliable early-stage circuit design.
Superconducting quantum circuit design is reliant on accurately mapping design parameters to a quantum Hamiltonian. Designers typically rely on computationally intensive finite-element electromagnetic simulations. However, effective circuit-level models can in principle capture much of the relevant physics for these systems, reducing the need for finite-element simulations. A barrier to implementing these simpler models has been the prevalence of distributed elements such as coplanar waveguides resonators in device designs. Techniques for modeling these distributed elements have been developed, but may be difficult to scale, reduce intuition, and give inaccurate results under strong coupling. In this work we describe a simple effective circuit-level model that faithfully reproduces the scattering parameters, and subsequently can predict certain Hamiltonian parameters, for a coupled, distributed element within a broader two-port network even up to strong coupling. Our approach does not explicitly require an electromagnetic simulation. Our model, along with other common lumped models used in black box quantization, is publicly available to researchers via an open-source code package, simpleLOMs.
Superconducting Josephson junctions and quantum phase slip (QPS) junctions create various hybrid circuits combined with nonsuperconducting elements. Those circuits require a common analysis method to bridge the gap between superconducting and nonsuperconducting electronics. This article presents an electromagnetic-flux-distribution model to unify the analyses of superconducting and non-superconducting circuits. This model uses electric and magnetic fluxes as the variables to unify the definitions of circuit elements and circuit laws; it derives general circuit equations of the circuits viewed from both electric and magnetic fields, to depict their dynamics and duality principles. This method is demonstrated in the analyses of a Josephson junction circuit and its dual QPS junction circuit. It shows that Josephson junction circuits are the magnetic-flux distribution network tuned by the Josephson current, while QPS junction circuits are the electric-flux distribution network modulated by the QPS voltage.
Here we show that to quantize any lumped element circuit, the circuit geometry must be included in a mathematical model of either the circuit fluxes or the circuit charges. By geometry of the circuit, we refer to the so-called parasitic inductances and capacitances that arise from the details of the circuit layout, which are well known to create noise in classical circuits. In contrast, the classical lumped element model describes only the topology of the circuit, which defines how different finite element variables are connected to one another by circuit components. By geometry we also refer to the fact that the quantum variables define the circuit geometry - some are outside the wire, some are inside the wire, and some are at boundary of the wire. Just as with classical circuits, these effects create noise; this noise arises in the form of high frequency components in the Hamiltonian that are difficult to accurately simulate using a lumped element model. The presentation is appropriate for undergraduate electrical and computer engineering students learning about quantum computing and physicists learning about electrical circuits.