Dissipative stabilization of cat qubits autonomously corrects for bit flip errors by ensuring that reservoir-engineered two-photon losses dominate over other mechanisms inducing phase flip errors. To describe the latter, we derive an effective master equation for an asymmetrically threaded SQUID based superconducting circuit used to stabilize a dissipative cat qubit. We analyze the dressing of relaxation processes under drives in time-dependent Schrieffer-Wolff perturbation theory for weakly anharmonic bosonic degrees of freedom, and in numerically exact Floquet theory. We find that spurious single-photon decay rates can increase under the action of the parametric pump that generates the required interactions for cat-qubit stabilization. Our analysis feeds into mitigation strategies that can inform current experiments, and the methods presented here can be extended to other circuit implementations.
Flux-pump induced degradation of T1 for dissipative cat qubits
Dissipative stabilization of cat qubits autonomously corrects for bit flip errors by ensuring that reservoir-engineered two-photon losses dominate over other mechanisms inducing phase flip errors. To describe the latter, we derive an effective master equation for an asymmetrically threaded SQUID based superconducting circuit used to stabilize a dissipative cat qubit. We analyze the dressing of relaxation processes under drives in time-dependent Schrieffer-Wolff perturbation theory for weakly anharmonic bosonic degrees of freedom, and in numerically exact Floquet theory. We find that spurious single-photon decay rates can increase under the action of the parametric pump that generates the required interactions for cat-qubit stabilization. Our analysis feeds into mitigation strategies that can inform current experiments, and the methods presented here can be extended to other circuit implementations.
Engineering nonlinear dissipation through parametric interactions is a key ingredient in autonomous quantum error correction. In ``cat'' qubits bit-flip errors may be exponentially suppressed using two-photon driven dissipation, but spurious dissipative channels appear, in a process that is poorly understood. The authors turn to high-order perturbation theory and exact numerical diagonalization to classify the possible decay mechanisms that reduce the coherence of such a qubit, bridging the gap between the microscopic parameters of the circuit and the lifetimes of the modes. Furthermore, engineering constraints on the surrounding apparatus are identified, to reduce decoherence.
Dissipatively stabilized cat qubits provide a promising route toward fault-tolerant quantum computation, exhibiting exponential suppression of bit-flip errors with increasing phase-space separation of the logical states, while incurring only a linear increase in phase-flip errors. Existing implementations rely on engineered two-photon dissipation via nonlinear coupling to a lossy environment, an approach largely confined to superconducting platforms and limited by spurious decay channels and finite dissipation rates. Here, we propose a fundamentally different stabilization paradigm based on repeated interactions with an auxiliary two-level system mediated by a quadratic Hamiltonian, enabling dissipative stabilization without reservoir engineering. Our approach overcomes key limitations of existing schemes and is compatible with a wider class of experimental platforms. Furthermore, it preserves the noise bias and extends to squeezed cat qubits, rendering single-photon loss errors partially correctable.
Cat qubits, for which logical |0⟩ and |1⟩ are coherent states |±α⟩ of a harmonic mode, offer a promising route towards quantum error correction. Using dissipation to our advantage so that photon pairs of the harmonic mode are exchanged with single photons of its environment, it is possible to stabilize the logical states and exponentially increase the bit-flip time of the cat qubit with the photon number |α|2 . A large two-photon dissipation rate κ2 ensures fast qubit manipulation and short error-correction cycles, which are instrumental to correct the remaining phase-flip errors in a repetition code of cat qubits. Here, we introduce and operate an autoparametric superconducting circuit that couples a mode containing the cat qubit to a lossy mode whose frequency is set at twice that of the cat mode. This passive coupling does not require a parametric pump, and it reaches a rate κ2/2π≈2 MHz . With such a strong two-photon dissipation, bit-flip errors of the autoparametric cat qubit are prevented for a characteristic time up to 0.3 s with only a mild impact on phase-flip errors. In addition, we illustrate how the phase of a quantum superposition between |α⟩ and |−α⟩ can be arbitrarily changed by driving the harmonic mode while keeping the engineered dissipation active. Published by the American Physical Society 2024
Autonomous quantum error correction (QEC) stabilizes a logical manifold through dissipative events that emit into output channels, which are typically accessible to measurement. These signals are often discarded, and whether they contain useful information about logical failures remains generally unclear. Using quantum trajectories, we show that in dissipatively stabilized cat qubits bit flips are not silent logical errors: each flip is accompanied by a strong, time-localized photon burst from the dissipative buffer. Photon counting and homodyne monitoring can therefore herald the loss of logical information without interrupting the autonomous stabilization: bit flips in dissipative cat qubits are erasures. More broadly, our results show that the emitted signals of engineered reservoirs can act as built-in failure monitors for autonomous QEC, turning rare logical faults into erasures available to a decoder and reducing fault-tolerance overhead. To this end, we develop a general framework, based on past quantum states and number-resolved master equations, to quantify the detectability of such logical failures in autonomous QEC from the emitted signal.
Kerr-cat qubits are bosonic qubits offering autonomous bit-flip protection, traditionally studied using driven superconducting nonlinear asymmetric inductive element (SNAIL) oscillators. Here, we theoretically explore an alternative circuit for Kerr-cat qubits based on symmetrically threaded superconducting quantum interference devices (SQUIDs). The symmetrically threaded SQUID (STS) architecture employs a simplified flux-pumped design that suppresses two-photon dissipation, a dominant loss mechanism in high-Kerr regimes, by engineering the drive Hamiltonian’s flux operator to generate only even-order harmonics. By fulfilling two critical criteria for practical Kerr-cat qubit operation, the STS emerges as an ideal platform: (1) a static Hamiltonian with diluted Kerr nonlinearity (achieved via the STS’s middle branch) and (2) a drive Hamiltonian restricted to even harmonics, which ensures robust two-photon driving with reduced dissipation. For weak Kerr nonlinearity, we find that the coherent state lifetime ( T α ) is similar between STS and SNAIL circuits. However, STS Kerr-cat qubits exhibit enhanced resistance to higher-order photon dissipation, enabling significantly extended T α even with stronger Kerr nonlinearities (approximately 10 MHz). In contrast to SNAIL, STS Kerr-cat qubits display a T α dip under weak two-photon driving for a high Kerr coefficient. We demonstrate that this dip can be suppressed by applying drive-dependent detuning, enabling Kerr-cat qubit operation with only eight Josephson junctions (of energies 80 GHz); fewer junctions suffice for higher junction energies. We further validate the robustness of the STS design by studying the impact of strong flux driving and asymmetric Josephson junctions on T α . With the proposed design and considering a cat size of ten photons, we predict T α of the order of tens of milliseconds, even in the presence of multiphoton heating and dephasing effects. The robustness of the STS Kerr-cat qubit makes it a promising component for fault-tolerant quantum processors.
Bistable systems are central to information processing, from classical bits to quantum qubits. Their robustness relies on mitigating switching errors, or bit flips. While a classical potential barrier suppresses thermal bit flips, quantum systems also suffer from phase-flip errors that degrade superpositions. "Cat" qubits leverage the principle of a potential barrier to exponentially suppress bit flips, but at the expense of a marginal increase in phase flips. This unique error bias simplifies quantum error correction, making cat qubits a promising platform for fault-tolerant quantum computation.This thesis first investigates the scaling of bit-flip errors in cat qubits as a function of their size. Using path integral techniques, we predict the switching rate in a single-mode bistable open quantum system. Drawing inspiration from systems satisfying detailed balance, we identify a set of non-idealities that nonetheless preserve the optimal scaling of ideal cat qubits.We then turn to the analysis of a superconducting circuit composed of Josephson junctions that implements a dissipative cat qubit. The nonlinear dissipation that is key to stabilizing a cat qubit originates from a parametrically activated coupling between the memory and a lossy mode. Our perturbative analysis uncovers parasitic drive-activated nonlinearities that amplify phase-flip errors as the cat-state stabilization strength increases, which ultimately alters the performance of a repetition code.Finally, we present the integration of the methods developed in this thesis into a complete simulation stack for superconducting circuits. We exemplify this integration with an ab initio study of a recently developed cascaded single-microwave-photon detector.