Quantum computation with bosonic modes presents a powerful paradigm for harnessing the principles of quantum mechanics to perform complex information processing tasks. In constructing a bosonic qubit with superconducting circuits, nonlinearity is typically introduced to a cavity mode through an ancillary two-level qubit. However, the spurious heating of the ancilla has impeded progress toward fully fault-tolerant bosonic qubits. The ability to decouple the ancilla when not in use would be beneficial but has so far only been realized with tunable couplers or additional parametric drives. This work presents a novel architecture for quantum information processing, comprising a three-dimensional post cavity coupled to a fluxonium ancilla via a readout resonator. The intricate energy-level structure of this system results in a complex landscape of interactions, the sign of which can be tuned by the magnetic field threading the fluxonium loop without the need for additional elements. Our results could significantly advance the lifetime and controllability of bosonic qubits.
Quantum computation with bosonic modes presents a powerful paradigm for harnessing the principles of quantum mechanics to perform complex information processing tasks. In constructing a bosonic qubit with superconducting circuits, nonlinearity is typically introduced to a cavity mode through an ancillary two-level qubit. However, the spurious heating of the ancilla has impeded progress toward fully fault-tolerant bosonic qubits. The ability to decouple the ancilla when not in use would be beneficial but has so far only been realized with tunable couplers or additional parametric drives. This work presents a novel architecture for quantum information processing, comprising a three-dimensional post cavity coupled to a fluxonium ancilla via a readout resonator. The intricate energy-level structure of this system results in a complex landscape of interactions, the sign of which can be tuned by the magnetic field threading the fluxonium loop without the need for additional elements. Our results could significantly advance the lifetime and controllability of bosonic qubits.
Bosonic codes in superconducting resonators are a hardware-efficient avenue for quantum error correction and benefit from the inherent bias toward relaxation errors provided by long-lived cavities compared to typical superconducting qubits. The required coupling to an ancillary control qubit, however, can negate these benefits by inducing highly detrimental effects such as excess decoherence and undesired nonlinearities. This is exemplified by the typically employed transmon qubit that imposes limits on cavity operations due to its finite lifetime as well as the inevitably induced self-Kerr nonlinearity. An important question is thus whether a cavity-qubit coupling can be realized that offers readout and control capabilities without spoiling the cavity. Here, motivated by its long lifetime and design flexibility of its Hamiltonian, we experimentally investigate the fluxonium as a control qubit for superconducting cavities. We couple a fluxonium qubit to a superconducting resonator in the strong-dispersive regime and use it to measure the coherence and flux-tunable inherited nonlinearities of the resonator. We then demonstrate quantum control of the oscillator by preparing and characterizing resonator Fock states and their superpositions, with fidelities limited by resonator decay in our planar prototype device. Finally, we show that the fluxonium can realize cavity-couplings that eliminate undesirable cavity nonlinearities and reach regimes of suppressed self-Kerr that are inaccessible to transmon-based devices. Our results thus demonstrate the potential of the fluxonium as a high-performance bosonic control qubit for superconducting cavities that can outperform existing transmon-based architectures.
Bosonic quantum error correction (QEC) offers a hardware-efficient route to fault-tolerant quantum computing. To date, however, superconducting circuit implementations of bosonic codes have utilized centimeter-scale 3D microwave cavities controlled by fixed-frequency transmon qubits, with logical lifetimes limited by transmon bit-flip errors. Here, we realize bosonic QEC in a fully planar architecture by pairing a heavy fluxonium, whose 451±70μs bit-flip lifetime exceeds that of any control qubit in previous demonstrations, with an on-chip Archimedean spiral resonator several orders of magnitude smaller in mode volume than prior 3D cavities. We prepare finite-energy Gottesman-Kitaev-Preskill (GKP) states and stabilize them using measurement-free error correction with rapid fluxonium reset, extending the logical lifetime by a factor of 1.59±0.05. These results provide the first demonstration of resonator control using a weakly coupled fluxonium and, with it, the first realization of standalone bosonic QEC in a fully planar superconducting circuit architecture.
The fluxonium qubit has emerged as a promising candidate for superconducting quantum computing due to its long coherence times and high-fidelity gates. Nonetheless, further scaling up and improving performance remain critical challenges for establishing fluxoniums as a viable alternative to transmons. A key obstacle lies in developing scalable coupling architectures. In this work, we introduce a scalable fluxonium architecture that enables decoupling of qubit states while maintaining tunable couplings between non-computational states. Beyond the well-studied ZZ crosstalk, we identify that always-on interactions involving non-computational levels can significantly degrade the fidelities of initialization, control, and readout in large systems, thereby impeding scalability. Based on two possible physical realizations of the architecture, we demonstrate that the issue can be mitigated by implementing tunable couplings for fluxonium plasmon transitions, meanwhile enabling fast, high-fidelity gates with passive ZZ suppression. This comparative analysis enables us to establish general principles for realizing the architecture while understanding and addressing implementation-specific challenges.
Strong light-matter interactions are central to state-of-the-art quantum technologies, spanning platforms as diverse as Rydberg atoms, trapped ions, and superconducting circuits. In superconducting circuits, the strong dispersive coupling between microwave photons (light) and ancillary qubits (matter) has enabled universal bosonic control and quantum error correction. However, this always-on dispersive interaction propagates errors from the ancillary qubits to the bosonic systems both while idling and when performing operations, introducing a trade-off between control strength and fidelity. We break this trade-off by introducing a parametrically activated hybridization between the bosonic modes and ancilla qubits, keeping both elements decoupled when not active. When activated, this hybridization mediates a dynamic light-matter coupling with non-trivial engineered symmetries, permitting resilience to ancilla decay and dephasing. This dynamic coupling functions as a new control primitive that offers a route to bosonic processors whose performance is set by the oscillator, rather than the ancilla.
As systems for quantum computing keep growing in size and number of qubits, challenges in scaling the control capabilities are becoming increasingly relevant. Efficient schemes to simultaneously mediate coherent interactions between multiple quantum systems and to reduce decoherence errors can minimize the control overhead in next-generation quantum processors. Here, we present a superconducting qubit architecture based on tunable parametric interactions to perform two-qubit gates, reset, leakage recovery, and to read out the qubits. In this architecture, parametrically driven multielement couplers selectively couple qubits to resonators and neighboring qubits, according to the frequency of the drive. We consider a system with two qubits and one readout resonator interacting via a single coupling circuit and experimentally demonstrate a controlled- Z gate with a fidelity of 98.30 ± 0.23 % , a reset operation that unconditionally prepares the qubit ground state with a fidelity of 99.80 ± 0.02 % and a leakage recovery operation with a 98.5 ± 0.3 % success probability. Furthermore, we implement a parametric readout with a single-shot assignment fidelity of 88.0 ± 0.4 % . These operations are all realized using a single tunable coupler and a statically decoupled resonator, demonstrating the experimental feasibility of the proposed architecture and its potential for reducing the system complexity in scalable quantum processors.
Superconducting circuits hosting long-lived bosonic modes are an excellent platform for emulating the dynamics of light and matter and exploiting them for quantum information processing. The space of accessible dynamics is greatly extended by introducing the frequency tunability of artificial atoms, whereby the interactions with the light field of a microwave cavity can be modified on demand. However, using external flux bias to control the frequency of transmons introduces significant losses to coupled cavities, reducing their single-photon lifetimes to a few tens of μs. These imperfections compromise the usefulness of the bosonic mode, which loses its ability to store and manipulate the quantum information of many-photon states. This thesis investigates the issue and demonstrates how to enhance the flux control of microwave cavities without compromising protection. Several hardware solutions were explored, including off-plane remote flux sources routed by a magnetic hose, and lithographically printed on-chip lines equipped with multiple stages of filtering. These developments equip the systems with broadband flux control and photon lifetimes of several hundred μs. They enable the real-time manipulation of the two central parameters of the Rabi model: detuning and coupling strength. This flexibility translates into operational primitives of interest, such as the calibration of nonlinearities to different interaction regimes, the activation of parametric resonances with adjustable coupling strengths, and the use of number-selective transmon-cavity transitions for qudit state preparation and control. These results lay the groundwork for exploring richer synthetic light-matter systems, controlling cavities with more complex nonlinear circuits, and engineering driven-dissipative systems with applications in quantum computation and sensing.