Among the cost metrics characterizing a quantum circuit, the T -count stands out as one of the most crucial as its minimization is particularly important in various areas of quantum computation such as fault-tolerant quantum computing and quantum circuit simulation. In this work, we contribute to the T -count reduction problem by proposing efficient T -count optimizers with low execution times. In particular, we greatly improve the complexity of TODD, an algorithm currently providing the best T -count reduction on various quantum circuits. We also propose some modifications to the algorithm which are leading to a significantly lower number of T gates. In addition, we propose another algorithm which has an even lower complexity and that achieves a better or equal T -count than the state of the art on most quantum circuits evaluated. We also prove that the number of T gates in the circuit obtained after executing our algorithms on a Hadamard-free circuit composed of n qubits is upper bounded by n ( n + 1 ) / 2 + 1 , which improves on the worst-case T -count of existing optimization algorithms. From this we derive an upper bound of ( n + 1 ) ( n + 2 h ) / 2 + 1 for the number of T gates in a Clifford + T circuit where h is the number of internal Hadamard gates in the circuit, i.e. the number of Hadamard gates lying between the first and the last T gate of the circuit.
Among the cost metrics characterizing a quantum circuit, the T -count stands out as one of the most crucial as its minimization is particularly important in various areas of quantum computation such as fault-tolerant quantum computing and quantum circuit simulation. In this work, we contribute to the T -count reduction problem by proposing efficient T -count optimizers with low execution times. In particular, we greatly improve the complexity of TODD, an algorithm currently providing the best T -count reduction on various quantum circuits. We also propose some modifications to the algorithm which are leading to a significantly lower number of T gates. In addition, we propose another algorithm which has an even lower complexity and that achieves a better or equal T -count than the state of the art on most quantum circuits evaluated. We also prove that the number of T gates in the circuit obtained after executing our algorithms on a Hadamard-free circuit composed of n qubits is upper bounded by n ( n + 1 ) / 2 + 1 , which improves on the worst-case T -count of existing optimization algorithms. From this we derive an upper bound of ( n + 1 ) ( n + 2 h ) / 2 + 1 for the number of T gates in a Clifford + T circuit where h is the number of internal Hadamard gates in the circuit, i.e. the number of Hadamard gates lying between the first and the last T gate of the circuit.
The Clifford+ T gate set is commonly used to perform universal quantum computation. In such setup the T gate is typically much more expensive to implement in a fault-tolerant way than Clifford gates. To improve the feasibility of fault-tolerant quantum computing it is then crucial to minimize the number of T gates. Many algorithms, yielding effective results, have been designed to address this problem. It has been demonstrated that performing a pre-processing step consisting of reducing the number of Hadamard gates in the circuit can help to exploit the full potential of these algorithms and thereby lead to a substantial T -count reduction. Moreover, minimizing the number of Hadamard gates also restrains the number of additional qubits and operations resulting from the gadgetization of Hadamard gates, a procedure used by some compilers to further reduce the number of T gates. In this work we tackle the Hadamard gate reduction problem, and propose an algorithm for synthesizing a sequence of π /4 Pauli rotations with a minimal number of Hadamard gates. Based on this result, we present an algorithm which optimally minimizes the number of Hadamard gates lying between the first and the last T gate of the circuit.
Abstract Before executing a quantum algorithm, one must first decompose the algorithm into machine-level instructions compatible with the architecture of the quantum computer, a process known as quantum compiling. There are many different quantum circuit decompositions for the same algorithm but it is desirable to compile leaner circuits. A fundamentally important cost metric is the T count—the number of T gates in a circuit. For the single qubit case, optimal compiling is essentially a solved problem. However, multi-qubit compiling is a harder problem with optimal algorithms requiring classical runtime exponential in the number of qubits. Here, we present and compare several efficient quantum compilers for multi-qubit Clifford + T circuits. We implemented our compilers in C++ and benchmarked them on random circuits, from which we determine that our TODD compiler yields the lowest T counts on average. We also benchmarked TODD on a library of reversible logic circuits that appear in quantum algorithms and found that it reduced the T count for 97% of the circuits with an average T -count saving of 20% when compared against the best of all previous circuit decompositions.
Optimal Hadamard gate count for Clifford+T synthesis of Pauli rotations sequences
The Clifford+T gate set is commonly used to perform universal quantum computation. In such setup the T gate is typically much more expensive to implement in a fault-tolerant way than Clifford gates. To improve the feasibility of fault-tolerant quantum computing it is then crucial to minimize the number of T gates. Many algorithms, yielding effective results, have been designed to address this problem. It has been demonstrated that performing a pre-processing step consisting of reducing the number of Hadamard gates in the circuit can help to exploit the full potential of these algorithms and thereby lead to a substantial T-count reduction. Moreover, minimizing the number of Hadamard gates also restrains the number of additional qubits and operations resulting from the gadgetization of Hadamard gates, a procedure used by some compilers to further reduce the number of T gates. In this work we tackle the Hadamard gate reduction problem, and propose an algorithm for synthesizing a sequence of π/4 Pauli rotations with a minimal number of Hadamard gates. Based on this result, we present an algorithm which optimally minimizes the number of Hadamard gates lying between the first and the last T gate of the circuit.
Abstract An important part of reaping computational advantage from a quantum computer is to reduce the quantum resources needed to implement a desired quantum algorithm. Quantum algorithms that are too large to be practical on noisy intermediate scale quantum devices will require fault-tolerant error correction. This work focuses on reducing the physical cost of implementing quantum algorithms when using the state-of-the-art fault-tolerant quantum error correcting codes, in particular, those for which implementing the T gate consumes vastly more resources than the other gates in the gate set. More specifically, in this paper we consider the group of unitaries that can be exactly implemented by a quantum circuit consisting of the Clifford + T gate set. The Clifford + T gate set is a universal gate set and in this group, using state-of-the-art surface codes, the T gate is by far the most expensive component to implement fault-tolerantly. So it is important to minimize the number of T gates necessary for a fault-tolerant implementation. Our primary interest is to compute a circuit for a given n -qubit unitary U , using the minimum possible number of T gates (called the T-count of unitary U ). We consider the problem COUNT-T, the optimization version of which aims to find the T-count of U . In its decision version the goal is to decide if the T-count is at most some positive integer m . Given an oracle for COUNT-T, we can compute a T-count-optimal circuit in time polynomial in the T-count and dimension of U . We give a provable classical algorithm that solves COUNT-T (decision) in time O N 2 ( c − 1 ) ⌈ m c ⌉ p o l y ( m , N ) and space O N 2 ⌈ m c ⌉ p o l y ( m , N ) , where N = 2 n and c ⩾ 2. This gives a space-time trade-off for solving this problem with variants of meet-in-the-middle techniques. We also introduce an asymptotically faster multiplication method that shaves a factor of N 0.7457 off of the overall complexity. Lastly, beyond our improvements to the rigorous algorithm, we give a heuristic algorithm that outputs a T-count-optimal circuit and has space and time complexity poly( m , N ), under some assumptions. In our heuristic algorithm we developed a novel way of pruning the search space. While our heuristic method still scales exponentially with the number of qubits (though with a lower exponent), there is a large improvement by going from exponential to polynomial scaling with m . We implemented our heuristic algorithm with up to 4 qubit unitaries and obtained a significant improvement in time. For all benchmark and random unitaries we studied, the T-count returned by our algorithm is at most the T-count of their circuits shown in previous papers.
Quantum computers promise exponential speedups for problems in cryptography, chemistry, and optimization. Realizing this promise requires fault tolerance: physical qubits are noisy, so logical qubits must be encoded redundantly across many physical ones using quantum error-correcting codes. In most practical fault-tolerance schemes, T gates cannot be implemented transversally and instead require costly magic-state distillation protocols involving a complex set of operations. As a result, T-gate count can dominate the resource budget of large-scale quantum computations, making T-count minimization a central bottleneck on the path to quantum advantage. Existing T-count optimization tools, however, do not scale to the circuits that quantum advantage demands.
We present theoretical and practical results on T-gate optimization. On the theoretical side, we give a linear-time randomized algorithm for phase folding, based on a novel randomized static analysis. Our static analysis soundly approximates the set of reachable quantum states with an arbitrarily high probability. Our key insight is a static analysis that does not track symbolic expressions, but propagates constant-width bitstrings down the circuit. On the practical side, our implementation, TZAP, is multiple orders of magnitude faster than state-of-the-art tools -- such as PyZX, VOQC, and Feynman -- closely matches their T-count reductions on standard benchmarks, and within seconds on a laptop computer can optimize circuits with millions of gates.
In the near term, programming quantum computers will remain severely limited by low quantum volumes.Therefore, it is desirable to implement quantum circuits with the fewest resources possible.For the common Clifford+T circuits, most research is focused on reducing the number of T gates, since they are an order of magnitude more expensive than Clifford gates in quantum error corrected encoding schemes.However, this optimization sometimes leads to more 2-qubit gates, which, even though they are less expensive in terms of fault-tolerance, contribute significantly to the overall circuit cost.Approaches based on the ZX-calculus have recently gained some popularity in the field, but reduction of 2-qubit gates is not their focus.In this work, we present an alternative for improving 2-qubit gate count of a quantum circuit with the ZX-calculus by using heuristics in ZX-diagram simplification.Our approach maintains the good reduction of the T gate count provided by other strategies based on ZX-calculus, thus serving as an extension for other optimization algorithms.Our results show that combining the available ZX-calculus-based optimizations with our algorithms can reduce the number of 2-qubit gates by as much as 40 % compared to current approaches using ZXcalculus.Additionally, we improve the results of the best currently available optimization technique of Nam et.al [22] for some circuits by up to 15 %.