Assemblies of strongly interacting fermions, whether in a condensed-matter or a quantum chemistry context, range amongst the most promising candidate systems for which quantum computing platforms could provide an advantage. Near-term quantum state preparation is typically realized by means of the variational quantum eigensolver (VQE) algorithm. One of the main challenges to a successful implementation of VQE lies in the sensitivity to noise exhibited by deep variational circuits. On the other hand, sufficient depth must be allowed to be able to reach a good approximation to the target state. In this work, we present a refined VQE scheme that consists in topping VQE with state-informed updates of the elementary fermionic modes (spin-orbitals). These updates consist in moving to the natural-orbital basis of the current, converged variational state, a basis we argue eases the task of state preparation. We test the method on the Hubbard model in the presence of experimentally relevant noise levels. For a fixed circuit structure, the method is shown to enhance the capabilities of the circuit to reach a state close to the target state without incurring too much overhead from shot noise. Moreover, coupled with an adaptive VQE scheme that constructs the circuit on the fly, we evidence reduced requirements on the depth of the circuit as the orbitals get updated.
Assemblies of strongly interacting fermions, whether in a condensed-matter or a quantum chemistry context, range amongst the most promising candidate systems for which quantum computing platforms could provide an advantage. Near-term quantum state preparation is typically realized by means of the variational quantum eigensolver (VQE) algorithm. One of the main challenges to a successful implementation of VQE lies in the sensitivity to noise exhibited by deep variational circuits. On the other hand, sufficient depth must be allowed to be able to reach a good approximation to the target state. In this work, we present a refined VQE scheme that consists in topping VQE with state-informed updates of the elementary fermionic modes (spin-orbitals). These updates consist in moving to the natural-orbital basis of the current, converged variational state, a basis we argue eases the task of state preparation. We test the method on the Hubbard model in the presence of experimentally relevant noise levels. For a fixed circuit structure, the method is shown to enhance the capabilities of the circuit to reach a state close to the target state without incurring too much overhead from shot noise. Moreover, coupled with an adaptive VQE scheme that constructs the circuit on the fly, we evidence reduced requirements on the depth of the circuit as the orbitals get updated.
Approximating the ground states of strongly interacting electron systems in quantum chemistry and condensed matter physics is expected to be one of the earliest applications of quantum computers. In this paper, we prepare highly accurate ground states of the Fermi-Hubbard model for small grids of up to six sites (12 qubits) by using an interpretable, adaptive variational quantum eigensolver (VQE) called ADAPT-VQE [H. R. Grimsley et al., Nat. Commun. 10, 3007 (2019)]. In contrast with nonadaptive VQE, this algorithm builds a system-specific ansatz by adding an optimal gate built from one-body or two-body fermionic operators at each step. We show this adaptive method outperforms the nonadaptive counterpart in terms of fewer variational parameters, short gate depth, and scaling with the system size. The fidelity and energy of the prepared state appear to improve asymptotically with ansatz depth. We also demonstrate the application of adaptive variational methods by preparing excited states and Green's functions using a proposed ADAPT-SSVQE algorithm. Lower depth, asymptotic convergence, noise tolerance of a variational approach [A. Peruzzo et al., Nat. Commun. 5, 4213 (2014); J. R. McLean et al., New J. Phys. 18, 023023 (2016); K. Sharma et al., New J. Phys. 22, 043006 (2020)], and a highly controllable, system-specific ansatz make the adaptive variational methods particularly well suited for noisy intermediate-scale quantum devices.
Approximating the ground states of strongly interacting electron systems in quantum chemistry and condensed matter physics is expected to be one of the earliest applications of quantum computers. In this paper, we prepare highly accurate ground states of the Fermi-Hubbard model for small grids up to 6 sites (12 qubits) by using an interpretable, adaptive variational quantum eigensolver(VQE) called ADAPT-VQE. In contrast with non-adaptive VQE, this algorithm builds a system-specific ansatz by adding an optimal gate built from one-body or two-body fermionic operators at each step. We show this adaptive method outperforms the non-adaptive counterpart in terms of fewer variational parameters, short gate depth, and scaling with the system size. The fidelity and energy of the prepared state appear to improve asymptotically with ansatz depth. We also demonstrate the application of adaptive variational methods by preparing excited states and Green functions using a proposed ADAPT-SSVQE algorithm. Lower depth, asymptotic convergence, noise tolerance of a variational approach, and a highly controllable, system-specific ansatz make the adaptive variational methods particularly well-suited for NISQ devices.
Abstract Quantum simulations are bound to be one of the main applications of near-term quantum computers. Quantum chemistry and condensed matter physics are expected to benefit from these technological developments. Several quantum simulation methods are known to prepare a state on a quantum computer and measure the desired observables. The most resource economic procedure is the variational quantum eigensolver (VQE), which has traditionally employed unitary coupled cluster as the ansatz to approximate ground states of many-body fermionic Hamiltonians. A significant caveat of the method is that the initial state of the procedure is a single reference product state from a classical Hartree–Fock calculation with no pairing correlations, hence it cannot represent superconducting states. In this work, we propose to improve the method by initializing the algorithm with a more general fermionic Gaussian state, an idea borrowed from the field of nuclear physics. We show how this Gaussian reference state can be prepared with a linear-depth circuit of quantum matchgates. By augmenting the set of available gates with nearest-neighbor phase coupling, we generate a low-depth circuit ansatz that can accurately prepare the ground state of correlated fermionic systems. This extends the range of applicability of the VQE to systems with strong pairing correlations such as superconductors, atomic nuclei, and topological materials.
The variational quantum eigensolver (VQE) is a method of choice to solve the electronic structure problem for molecules on near-term gate-based quantum computers.However, the circuit depth is expected to grow significantly with the problem size.Increased depth can both degrade the accuracy of the results and reduce trainability.In this work, we propose an approach to reduce ansatz circuit depth.Our approach, called "PermVQE," adds an additional optimization loop to the VQE that permutes qubits in order to solve for the qubit Hamiltonian that maximally localizes correlations in the ground state.The choice of permutations is based on mutual information, which is a measure of interaction between electrons and/or holes in spin-orbitals.Encoding strongly entangled spin-orbitals into proximal qubits on a quantum chip naturally reduces the circuit depth needed to prepare the ground state.For representative molecular systems, LiH, H 2 , (H 2 ) 2 , H = 4 , H + 3 , and N 2 , we demonstrate that placing entangled qubits in close proximity leads to shallower depth circuits required to reach a given eigenvalue-eigenvector accuracy.The approach is designed for hardware-efficient ansatz of any qubit connectivity, and examples are demonstrated for linear and twodimensional grid architectures.The main ideas can also be applied to simulate molecules with other ansatz as well as variational quantum algorithms beyond the VQE.In particular, we demonstrate the beneficial effect of qubit permutations to build fermionic-adaptive derivative assembled pseudo-Trotter ansatz on a linear qubit connectivity architecture with nearly a twofold reduction of the number of controlled NOT gates.
Near-term quantum computers will be limited in the number of qubits on which they can process information as well as the depth of the circuits that they can coherently carry out. To date, experimental demonstrations of algorithms such as the Variational Quantum Eigensolver (VQE) have been limited to small molecules using minimal basis sets for this reason. In this work we propose incorporating an orbital optimization scheme into quantum eigensolvers wherein a parametrized partial unitary transformation is applied to the basis functions set in order to reduce the number of qubits required for a given problem. The optimal transformation is found by minimizing the ground state energy with respect to this partial unitary matrix. Through numerical simulations of small molecules up to 16 spin orbitals, we demonstrate that this method has the ability to greatly extend the capabilities of near-term quantum computers with regard to the electronic structure problem. We find that VQE paired with orbital optimization consistently achieves lower ground state energies than traditional VQE when using the same number of qubits and even frequently achieves lower ground state energies than VQE methods using more qubits.
We present a self-consistent field (SCF) approach within the adaptive derivative-assembled problem-tailored ansatz variational quantum eigensolver (ADAPT-VQE) framework for efficient quantum simulations of chemical systems on near-term quantum computers. To this end, our ADAPT-VQE-SCF approach combines the idea of generating an ansatz with a small number of parameters, resulting in shallow-depth quantum circuits with a direct minimization of an energy expression that is correct to second order with respect to changes in the molecular orbital basis. Our numerical analysis, including calculations for the transition-metal complex ferrocene [Fe (C 5 H 5 ) 2 ], indicates that convergence in the self-consistent orbital optimization loop can be reached without a considerable increase in the number of two-qubit gates in the quantum circuit by comparison to a VQE optimization in the initial molecular orbital basis. Moreover, the orbital optimization can be carried out simultaneously within each iteration of the ADAPT-VQE cycle. ADAPT-VQE-SCF thus allows us to implement a routine analogous to the complete active space SCF, a cornerstone of state-of-the-art computational chemistry, in a hardware-efficient manner on near-term quantum computers. Hence, ADAPT-VQE-SCF paves the way toward a paradigm shift for quantitative quantum-chemistry simulations on quantum computers by requiring fewer qubits and opening up for the use of large and flexible atomic orbital basis sets in contrast to earlier methods that are predominantly based on the idea of full active spaces with minimal basis sets.