Bose-Einstein-condensate source on an optical-grating-based atom chip for quantum sensor applications
Romain Calviac, Antoine Rouxel, Samuel Charlot, David Bourrier, Alexandre Arnoult, Antoine Monmayrant, Olivier Gauthier‐Lafaye, A. Gauguet, Baptiste Allard
The sensitivity of ultracold-atom sensors has great potential for on-board applications, but achieving this precision outside the laboratory requires a robust, compact atom source. This work presents a hybrid atom chip that combines two techniques to simplify the cold-atom source: optical gratings for single-beam laser cooling and conductive microcircuits for tight magnetic confinement. This hybrid configuration also achieves Bose-Einstein condensation. This research paves the way for integrating more advanced features into atomic chips with applications in atomic interferometry and atomtronics.
The sensitivity of ultracold-atom sensors has great potential for on-board applications, but achieving this precision outside the laboratory requires a robust, compact atom source. This work presents a hybrid atom chip that combines two techniques to simplify the cold-atom source: optical gratings for single-beam laser cooling and conductive microcircuits for tight magnetic confinement. This hybrid configuration also achieves Bose-Einstein condensation. This research paves the way for integrating more advanced features into atomic chips with applications in atomic interferometry and atomtronics.
Compact, robust ultracold atomic sources are essential for onboard quantum sensors with applications in inertial sensing and geodesy. However, producing ultracold atoms like Bose-Einstein condensates (BEC) increases the complexity of the system and often involves low production rates and high power consumption. Atom chips [1] offer rapid ultracold atom production through tight magnetic traps and are compatible with onboard experiments [2]. To address challenges such as optical beam alignment, grating magneto-optical traps (GMOTs) [3] have been developed, facilitating miniaturization of atomic clocks [4] and atom interferometers [5].
Bose-Einstein condensates (BECs) have been proposed for many applications in atom interferometry, as their coherence over long evolution times promises unprecedented sensitivity. To date, BECs can be efficiently created in devices using atom chips, but these are still complex and place high demands on size, weight and power. To further simplify these setups, we equipped an atom chip with a nano-structured diffraction-grating to derive all beams for the magneto-optical trap (MOT) from a single laser beam. Moreover, using a 2D+-MOT as an atomic source and a beam with uniform intensity for the grating illumination, we capture 1×109 atoms in one second, cool them to 14μK, and demonstrate magnetic trapping using the atom chip. This is a major step towards the simplification of portable BEC devices for quantum sensing on earth and in space.
Abstract Diffraction gratings have simplified the optical implementation of magneto-optical traps (MOTs) to require only a single input beam, however reaching high atom number and fast loading has proven to be a challenge. We equipped an atom chip with a grating surface and paired it with a velocity-tunable 2D+-MOT as an atomic source to facilitate efficient loading together with magnetic trapping. Using uniform grating illumination, we magneto-optically trap 1.0 ( 1 ) × 10 9 atoms within one second, cool them to 14.1 ( 3 ) μ K , and transfer a quarter of them into the magnetic chip trap. This is a key step towards simple portable quantum sensors employing (ultra-)cold atoms.
Laser-cooled atoms are a key quantum medium for atomic clocks, precision metrology, and atom interferometers, and they hold strong potential to advance quantum technologies for position, navigation, and timing. Realizing this potential requires moving cold-atom systems beyond laboratory environments. Integrated photonic chips provide a path forward by improving reliability and reducing size, weight, and power consumption, enabling portable and compact quantum sensors for real-world applications. This review surveys recent progress in laser-cooled atomic platforms, with a focus on the key components that enable on-chip integration of cold-atom systems. We discuss on-chip laser stabilization and linewidth-narrowing techniques, enhanced photon–atom coupling at the chip scale, miniaturized high-vacuum chambers, and the integration of on-chip magnetic coils for cold-atom sensing. Together, these developments are critical to the deployment of chip-scale cold-atom devices in both fundamental atomic physics and practical sensing applications. We conclude with an outlook on next-generation integrated cold-atom platforms and their potential impact on quantum technologies.
Ultra-cold atoms have become indispensable in quantum sensing, quantum computing, and quantum communication applications, as well as in fundamental sciences. In quantum sensing, they enable precision measurements with outstanding sensitivities that can be of great benefit in navigation, geodesy, and fundamental physics applications. The sensitivity of the atom interferometers used herefore typically scales with the square of the interrogation time. Therefore, in atom interferometric measurements, one seeks ensembles that feature a particularly low internal kinetic energy and can thus be detected after a long time-of-flight. The lowest values are achieved using Bose-Einstein condensates in conjunction with delta-kick collimation, a technique for the collimation of the atomic wave function. Bose-Einstein condensation can be achieved using a multi-stage laser cooling scheme, followed by evaporative cooling, which finally brings the temperature down to the critical temperature, typically in the nanokelvin regime. In addition to the low thermal spread, microgravity enables particularly long observation times, as it avoids limitations of the interrogation time due to vacuum chamber constraints, which are present when falling freely under the influence of gravity. Additionally, microgravity enables measurements that are not possible under normal gravity conditions, such as buoyancy-free miscibility studies, truly uniform potentials, and advanced cold atom quantum memories, which are projected to feature unprecedented time-bandwidth products. For the preparation of a Bose-Einstein condensate, two techniques are widely used in science, namely magnetic traps and optical dipole traps. For microgravity missions, magnetic traps on atom chips have been used in nearly all setups so far due to their particularly low SWAP budget and high cold atom flux. In contrast, ground-based experiments often prefer optical traps due to their higher versatility, full optical access, and the absence of surfaces in proximity to the atoms, which is fundamental for precision measurements. Additionally, optical traps enable the manipulation of intra- and inter-species scattering lengths using Feshbach resonances. Compared to atom chip traps, they also feature an intrinsically better symmetry of the trapping potential, in theory leading to fewer aberrations in matter-wave optics. The latter could enable the generation of ensembles in the yet unreached femtokelvin regime using delta-kick collimation with fewer perturbations. This thesis is about the realization of a 1064nm optical dipole trap set up for the microgravity environment of the Bremen Drop Tower. It aims to highlight the advantages of optical traps in conjunction with microgravity and prepare optical trapping technology for use in future microgravity and space missions. The thesis describes the experimental setup, the direct loading process, the characterization of the optical potential, and the optimization and investigation of the evaporative cooling in the optical dipole trap. For the evaporation process, the influence of gravity is comprehensively investigated through analytical calculations and microgravity tests. Bose-Einstein condensation is demonstrated, proving the achievement of condensation through absorption imaging of the spatial distribution, tests on the free evolution of the ensemble, and investigation of the phase-space densities achieved. Up to (74 ± 4)% condensation of an ensemble featuring (30 000 ± 13 000) atoms at a kinetic temperature of (37 ± 3) nK is demonstrated. The evaporation shows high efficiency down to a 3 s evaporation time, while a critical phase-space density can be achieved within (1.29 ± 0.07) s using an even faster evaporation ramp. This opens the door to fundamental physics experiments on Bose-Einstein condensates in microgravity, as well as applications pursuing atomic ensembles with exceptionally low expansion velocities.
Atom chips are devices used to magnetically trap and manipulate ultracold atoms and Bose-Einstein condensates near a surface. In particular, permanent magnetic film atom chips can allow very tight confinement and intricate magnetic field designs while circumventing technical current noise. Research described in this thesis is focused on the development of a magnetic film atom chip, the production of Bose-Einstein condensates near the film surface, the characterisation of the associated magnetic potentials using rf spectroscopy of ultracold atoms and the realisation of a precision sensor based on splitting Bose-Einstein condensates in a double-well potential. The atom chip itself combines the edge of a perpendicularly magnetised GdTbFeCo film with a machined silver wire structure. A mirror magneto-optical trap collects up to 5 x 108 87Rb atoms beneath the chip surface. The current-carrying wires are then used to transfer the cloud of atoms to the magnetic film microtrap and radio frequency evaporative cooling is applied to produce Bose-Einstein condensates consisting of 1 x 105 atoms. We have identified small spatial magnetic field variations near the film surface that fragment the ultracold atom cloud. These variations originate from inhomogeneity in the film magnetisation and are characterised using a novel technique based on spatially resolved radio frequency spectroscopy of the atoms to map the magnetic field landscape over a large area. The observations agree with an analytic model for the spatial decay of random magnetic fields from the film surface. Bose-Einstein condensates in our unique potential landscape have been used as a precision sensor for potential gradients. We transfer the atoms to the central region of the chip which produces a double-well potential. A single BEC is formed far from the surface and is then dynamically split in two by moving the trap closer to the surface. After splitting, the population of atoms in each well is extremely sensitive to the asymmetry of the potential and can be used to sense tiny magnetic field gradients or changes in gravity on a small spatial scale.