Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2405.11687

Crossing The Gap Using Variational Quantum Eigensolver: A Comparative Study

Chen, I-Chi, Nouhaila Innan, Suman Kumar Roy, Jason Saroni

Published May 19, 2024• 1 citation
arXivHTMLPDF

Abstract

Within the evolving domain of quantum computational chemistry, the Variational Quantum Eigensolver (VQE) has been developed to explore not only the ground state but also the excited states of molecules. In this study, we compare the performance of Variational Quantum Deflation (VQD) and Subspace-Search Variational Quantum Eigensolver (SSVQE) methods in determining the low-lying excited states of $LiH$. Our investigation reveals that while VQD exhibits a slight advantage in accuracy, SSVQE stands out for its efficiency, allowing the determination of all low-lying excited states through a single parameter optimization procedure. We further evaluate the effectiveness of optimizers, including Gradient Descent (GD), Quantum Natural Gradient (QNG), and Adam optimizer, in obtaining $LiH$'s first excited state, with the Adam optimizer demonstrating superior efficiency in requiring the fewest iterations. Moreover, we propose a novel approach combining Folded Spectrum VQE (FS-VQE) with either VQD or SSVQE, enabling the exploration of highly excited states. We test the new approaches for finding all three $H_4$'s excited states. Folded Spectrum SSVQE (FS-SSVQE) can find all three highly excited states near $-1.0$ Ha with only one optimizing procedure, but the procedure converges slowly. In contrast, although Folded spectrum VQD (FS-VQD) gets highly excited states with individual optimizing procedures, the optimizing procedure converges faster.

DOI
10.48550/arxiv.2405.11687

Related papers

Calculating transition amplitudes by variational quantum eigensolvers

Yohei Ibe, Yuya O. Nakagawa, Takahiro Yamamoto +3 more

Variational quantum eigensolver (VQE) is an appealing candidate for the application of near-term quantum computers. A technique introduced in [Higgot et al., Quantum 3, 156 (2019)], which is named variational quantum deflation (VQD), has extended the ability of the VQE framework for finding excited states of a Hamiltonian. However, no method to evaluate transition amplitudes between the eigenstates found by the VQD without using any costly Hadamard-test-like circuit has been proposed despite its importance for computing properties of the system such as oscillator strengths of molecules. Here we propose a method to evaluate transition amplitudes between the eigenstates obtained by the VQD avoiding any Hadamard-test-like circuit. Our method relies only on the ability to estimate overlap between two states, so it does not restrict to the VQD eigenstates and applies for general situations. To support the significance of our method, we provide a comprehensive comparison of three previously proposed methods to find excited states with numerical simulation of three molecules (lithium hydride, diazene, and azobenzene) in a noiseless situation and find that the VQD method exhibits the best performance among the three methods. Finally, we demonstrate the validity of our method by calculating the oscillator strength of lithium hydride in numerical simulations with shot noise. Our results illustrate the superiority of the VQD to find excited states and widen its applicability to various quantum systems.

•Feb 26, 2020•9 citations

Calculating transition amplitudes by variational quantum deflation

Yohei Ibe, Yuya O. Nakagawa, Nathan Earnest +4 more

Variational quantum eigensolver (VQE) is an appealing candidate for the application of near-term quantum computers. A technique introduced in [Higgot et al., Quantum 3, 156 (2019)], which is named variational quantum deflation (VQD), has extended the ability of the VQE framework for finding excited states of a Hamiltonian. However, no method to evaluate transition amplitudes between the eigenstates found by the VQD without using any costly Hadamard-test-like circuit has been proposed despite its importance for computing properties of the system such as electronic oscillator strengths of molecules. Here we propose a method to evaluate transition amplitudes between the eigenstates obtained by the VQD avoiding any Hadamard-test-like circuit. Our method relies only on the ability to estimate overlap between two states, so it does not restrict to the VQD eigenstates and applies for general situations. To support the significance of our method, we provide a comparison of three previously proposed methods to find excited states with numerical simulation of three molecules (lithium hydride, diazene, and azobenzene) and find that the VQD method exhibits the best performance among the three methods within the scope of noiseless simulation. Finally, we demonstrate the validity of our method by calculating the oscillator strength of lithium hydride, comparing results from numerical simulations and real-hardware experiments on the cloud enabled quantum computer IBMQ Rome. Our results illustrate the superiority of the VQD to find excited states and widen its applicability to various quantum systems.

arXiv:2002.11724•Physical Review Research•Mar 3, 2022•51 citations

Folded Spectrum VQE: A Quantum Computing Method for the Calculation of Molecular Excited States

Lila Cadi Tazi, Alex J. W. Thom

High Resolution Image Download MS PowerPoint Slide The recent developments of quantum computing present novel potential pathways for quantum chemistry as the scaling of the computational power of quantum computers could be harnessed to naturally encode and solve electronic structure problems. Theoretically exact quantum algorithms for chemistry have been proposed (e.g., quantum phase estimation), but the limited capabilities of current noisy intermediate-scale quantum devices motivated the development of less demanding hybrid algorithms. In this context, the variational quantum eigensolver (VQE) algorithm was successfully introduced as an effective method to compute the ground-state energies of small molecules. This study investigates the folded spectrum (FS) method as an extension of the VQE algorithm for the computation of molecular excited states. It provides the possibility of directly computing excited states around a selected target energy using the same or quantum circuit as for the ground-state calculation. Inspired by the variance-based methods from the quantum Monte Carlo literature, the FS method minimizes the energy variance, thus, in principle, requiring a computationally expensive squared Hamiltonian to be applied. We alleviate this potentially poor scaling by employing a Pauli grouping procedure to identify sets of commuting Pauli strings that can be evaluated simultaneously. This allows for a significant reduction in the computational cost. We applied the FS-VQE method to small molecules (H 2, LiH), obtaining all electronic excited states with chemical accuracy on ideal quantum simulators. Furthermore, we explore the application of quantum error mitigation techniques, demonstrating improved energy accuracy on noisy simulators compared with simulations without mitigation.

arXiv:2305.04783•Journal of Chemical Theory and Computation•Mar 16, 2024•29 citations

Effect of constraint and Tabu Search term on Variational Quantum Eigensolver and Subspace-Search Variational Quantum Eigensolver

Hikaru Wakaura, Takao Tomono

Subspace-Search Variational Quantum Eigen solver (SSVQE) is a searching method of multiple states and relies on the unitarity of transformations to ensure the orthogonality of output states for multiple states. Therefore, this method is thought to be a promising method for quantum chemistry because ordinary Variational Quantum Eigen solver (VQE) can only calculate the excited states step by step from the ground state based on Variational Quantum deflation (VQD). We compare the advantage of VQE, SSVQE with/without the constraint term and/or Tabu search term, which is added by the Lagrange multiplier method so as to calculate the desired energy levels. We evaluated the advantage by calculating each level of H2 and HeH, respectively. As there simulation results, the accuracy calculated by constrained VQE with Tabu search indicates higher accuracy than that of our other algorithm, for analysis on H2. The accuracy calculated by constrained SSVQE indicates higher that of the constrained VQE with Tabu search. We found it is beneficial for enhancing the accuracy to use constraint terms decreasing convergence times to use Tabu search terms according to the nature of molecules. We demonstrate that constraint and Tabu search terms contribute to the accuracy and convergence time on quantum chemical calculating.

arXiv:2103.12574•Mar 23, 2021•0 citations

Variational quantum eigensolvers by variance minimization

Dan-Bo Zhang, Zhan-Hao Yuan, Tao Yin

Variational quantum eigensolver(VQE) typically minimizes energy with hybrid quantum-classical optimization, which aims to find the ground state. Here, we propose a VQE by minimizing energy variance, which is called as variance-VQE(VVQE). The VVQE can be viewed as an self-verifying eigensolver for arbitrary eigenstate by designing, since an eigenstate for a Hamiltonian should have zero energy variance. We demonstrate properties and advantages of VVQE for solving a set of excited states with quantum chemistry problems. Remarkably, we show that optimization of a combination of energy and variance may be more efficient to find low-energy excited states than those of minimizing energy or variance alone. We further reveal that the optimization can be boosted with stochastic gradient descent by Hamiltonian sampling, which uses only a few terms of the Hamiltonian and thus significantly reduces the quantum resource for evaluating variance and its gradients.

arXiv:2006.15781•Jun 29, 2020•10 citations

Quantum computing of the electronic structure of crystals by the Variational Quantum Deflation algorithm

Michal Ďuriška, Ivana Miháliková, Martin Friák

Abstract Variational Quantum Eigensolver (VQE) and its extension, Variational Quantum Deflation (VQD), have emerged as promising algorithms for computing ground and excited state energy eigenvalues of Hamiltonians, particularly in quantum physics, chemistry, and materials science. Recently, the VQE and VQD algorithms were implemented to calculate the electronic band structure described by the tight-binding Hamiltonian. Despite their success for simple models, scalability remains a challenge due to the need for a large number of circuit executions, limited qubit coherence times, and low gate fidelities. In this work, we implemented the VQE and VQD algorithms for tight-binding models of diamond and zincblende crystal structures (Sn, C, Si, Ge, AlP, AlAs, AlSb, and GaP) using a quantum computer simulator. We investigate the scalability challenges, focusing on the significant overhead caused by a large number of quantum circuit executions required to find the energy eigenvalues. Our analysis highlights the substantial amount of both measurement and optimization overheads in VQD, particularly as the number of excited states increases. Based on our findings, we critically discuss the implications of implementing VQD on current noisy intermediate-scale quantum (NISQ) devices.

Physica Scripta•Feb 27, 2025•6 citations
Within the evolving domain of quantum computational chemistry, the Variational Quantum Eigensolver (VQE) has been developed to explore not only the ground state but also the excited states of molecules. In this study, we compare the performance of Variational Quantum Deflation (VQD) and Subspace-Search Variational Quantum Eigensolver (SSVQE) methods in determining the low-lying excited states of LiHLiHLiH. Our investigation reveals that while VQD exhibits a slight advantage in accuracy, SSVQE stands out for its efficiency, allowing the determination of all low-lying excited states through a single parameter optimization procedure. We further evaluate the effectiveness of optimizers, including Gradient Descent (GD), Quantum Natural Gradient (QNG), and Adam optimizer, in obtaining LiHLiHLiH's first excited state, with the Adam optimizer demonstrating superior efficiency in requiring the fewest iterations. Moreover, we propose a novel approach combining Folded Spectrum VQE (FS-VQE) with either VQD or SSVQE, enabling the exploration of highly excited states. We test the new approaches for finding all three H4H_4H4​'s excited states. Folded Spectrum SSVQE (FS-SSVQE) can find all three highly excited states near −1.0-1.0−1.0 Ha with only one optimizing procedure, but the procedure converges slowly. In contrast, although Folded spectrum VQD (FS-VQD) gets highly excited states with individual optimizing procedures, the optimizing procedure converges faster.
Variational quantum eigensolver (VQE) is an appealing candidate for the application of near-term quantum computers. A technique introduced in [Higgot et al., Quantum 3, 156 (2019)], which is named variational quantum deflation (VQD), has extended the ability of the VQE framework for finding excited states of a Hamiltonian. However, no method to evaluate transition amplitudes between the eigenstates found by the VQD without using any costly Hadamard-test-like circuit has been proposed despite its importance for computing properties of the system such as oscillator strengths of molecules. Here we propose a method to evaluate transition amplitudes between the eigenstates obtained by the VQD avoiding any Hadamard-test-like circuit. Our method relies only on the ability to estimate overlap between two states, so it does not restrict to the VQD eigenstates and applies for general situations. To support the significance of our method, we provide a comprehensive comparison of three previously proposed methods to find excited states with numerical simulation of three molecules (lithium hydride, diazene, and azobenzene) in a noiseless situation and find that the VQD method exhibits the best performance among the three methods. Finally, we demonstrate the validity of our method by calculating the oscillator strength of lithium hydride in numerical simulations with shot noise. Our results illustrate the superiority of the VQD to find excited states and widen its applicability to various quantum systems.
Variational quantum eigensolver (VQE) is an appealing candidate for the application of near-term quantum computers. A technique introduced in [Higgot et al., Quantum 3, 156 (2019)], which is named variational quantum deflation (VQD), has extended the ability of the VQE framework for finding excited states of a Hamiltonian. However, no method to evaluate transition amplitudes between the eigenstates found by the VQD without using any costly Hadamard-test-like circuit has been proposed despite its importance for computing properties of the system such as electronic oscillator strengths of molecules. Here we propose a method to evaluate transition amplitudes between the eigenstates obtained by the VQD avoiding any Hadamard-test-like circuit. Our method relies only on the ability to estimate overlap between two states, so it does not restrict to the VQD eigenstates and applies for general situations. To support the significance of our method, we provide a comparison of three previously proposed methods to find excited states with numerical simulation of three molecules (lithium hydride, diazene, and azobenzene) and find that the VQD method exhibits the best performance among the three methods within the scope of noiseless simulation. Finally, we demonstrate the validity of our method by calculating the oscillator strength of lithium hydride, comparing results from numerical simulations and real-hardware experiments on the cloud enabled quantum computer IBMQ Rome. Our results illustrate the superiority of the VQD to find excited states and widen its applicability to various quantum systems.
High Resolution Image Download MS PowerPoint Slide The recent developments of quantum computing present novel potential pathways for quantum chemistry as the scaling of the computational power of quantum computers could be harnessed to naturally encode and solve electronic structure problems. Theoretically exact quantum algorithms for chemistry have been proposed (e.g., quantum phase estimation), but the limited capabilities of current noisy intermediate-scale quantum devices motivated the development of less demanding hybrid algorithms. In this context, the variational quantum eigensolver (VQE) algorithm was successfully introduced as an effective method to compute the ground-state energies of small molecules. This study investigates the folded spectrum (FS) method as an extension of the VQE algorithm for the computation of molecular excited states. It provides the possibility of directly computing excited states around a selected target energy using the same or quantum circuit as for the ground-state calculation. Inspired by the variance-based methods from the quantum Monte Carlo literature, the FS method minimizes the energy variance, thus, in principle, requiring a computationally expensive squared Hamiltonian to be applied. We alleviate this potentially poor scaling by employing a Pauli grouping procedure to identify sets of commuting Pauli strings that can be evaluated simultaneously. This allows for a significant reduction in the computational cost. We applied the FS-VQE method to small molecules (H 2, LiH), obtaining all electronic excited states with chemical accuracy on ideal quantum simulators. Furthermore, we explore the application of quantum error mitigation techniques, demonstrating improved energy accuracy on noisy simulators compared with simulations without mitigation.
Subspace-Search Variational Quantum Eigen solver (SSVQE) is a searching method of multiple states and relies on the unitarity of transformations to ensure the orthogonality of output states for multiple states. Therefore, this method is thought to be a promising method for quantum chemistry because ordinary Variational Quantum Eigen solver (VQE) can only calculate the excited states step by step from the ground state based on Variational Quantum deflation (VQD). We compare the advantage of VQE, SSVQE with/without the constraint term and/or Tabu search term, which is added by the Lagrange multiplier method so as to calculate the desired energy levels. We evaluated the advantage by calculating each level of H2 and HeH, respectively. As there simulation results, the accuracy calculated by constrained VQE with Tabu search indicates higher accuracy than that of our other algorithm, for analysis on H2. The accuracy calculated by constrained SSVQE indicates higher that of the constrained VQE with Tabu search. We found it is beneficial for enhancing the accuracy to use constraint terms decreasing convergence times to use Tabu search terms according to the nature of molecules. We demonstrate that constraint and Tabu search terms contribute to the accuracy and convergence time on quantum chemical calculating.
Variational quantum eigensolver(VQE) typically minimizes energy with hybrid quantum-classical optimization, which aims to find the ground state. Here, we propose a VQE by minimizing energy variance, which is called as variance-VQE(VVQE). The VVQE can be viewed as an self-verifying eigensolver for arbitrary eigenstate by designing, since an eigenstate for a Hamiltonian should have zero energy variance. We demonstrate properties and advantages of VVQE for solving a set of excited states with quantum chemistry problems. Remarkably, we show that optimization of a combination of energy and variance may be more efficient to find low-energy excited states than those of minimizing energy or variance alone. We further reveal that the optimization can be boosted with stochastic gradient descent by Hamiltonian sampling, which uses only a few terms of the Hamiltonian and thus significantly reduces the quantum resource for evaluating variance and its gradients.
Abstract Variational Quantum Eigensolver (VQE) and its extension, Variational Quantum Deflation (VQD), have emerged as promising algorithms for computing ground and excited state energy eigenvalues of Hamiltonians, particularly in quantum physics, chemistry, and materials science. Recently, the VQE and VQD algorithms were implemented to calculate the electronic band structure described by the tight-binding Hamiltonian. Despite their success for simple models, scalability remains a challenge due to the need for a large number of circuit executions, limited qubit coherence times, and low gate fidelities. In this work, we implemented the VQE and VQD algorithms for tight-binding models of diamond and zincblende crystal structures (Sn, C, Si, Ge, AlP, AlAs, AlSb, and GaP) using a quantum computer simulator. We investigate the scalability challenges, focusing on the significant overhead caused by a large number of quantum circuit executions required to find the energy eigenvalues. Our analysis highlights the substantial amount of both measurement and optimization overheads in VQD, particularly as the number of excited states increases. Based on our findings, we critically discuss the implications of implementing VQD on current noisy intermediate-scale quantum (NISQ) devices.