Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2404.18847 · Quantum

Cyclic measurements and simplified quantum state tomography

Victor Gonzalez Avella, Jakub Czartowski, Dardo Goyeneche, Karol Życzkowski

Published Jun 4, 2025• 2 citations
arXivHTMLPDF

Abstract

Tomographic reconstruction of quantum states plays a fundamental role in benchmarking quantum systems and accessing information encoded in quantum-mechanical systems. Among the informationally complete sets of quantum measurements, the tight ones provide a linear reconstruction formula and minimize the propagation of statistical errors. However, implementing tight measurements in the lab is challenging due to the high number of required measurement projections, involving a series of experimental setup preparations. In this work, we introduce the notion of cyclic tight measurements, which allow us to perform full quantum state tomography while considering only repeated application of a single unitary-based quantum device during the measurement stage. This type of measurement significantly simplifies the complexity of the experimental setup required to retrieve the quantum state of a physical system. Additionally, we design a feasible setup preparation procedure that produces well-approximated cyclic tight measurements in every finite dimension.

DOI
10.22331/q-2025-06-04-1763

Related papers

Continuous Measurement Quantum State Tomography of Atomic Ensembles

Riofrio Almeida, A R Carlos

Quantum state tomography is a fundamental tool in quantum information processing. It allows us to estimate the state of a quantum system by measuring different observables on many identically prepared copies of the system. This is, in general, a very time-consuming task that requires a large number of measurements. There are, however, systems in which the data acquisition can be done more efficiently. In fact, an ensemble of quantum systems can be prepared and manipulated by external fields while being continuously and collectively probed, producing enough information to estimate its state. This provides a basis for continuous measurement quantum tomography. In this protocol, an ensemble of identically prepared systems is collectively probed and controlled in a time-dependent manner to create an informationally complete continuous measurement record. The measurement history is then inverted to determine the state at the initial time. We use two different estimation methods: maximum likelihood and compressed sensing. The general formalism is applied to the case of reconstruction of the quantum state encoded in the magnetic sub-levels of a large-spin alkali atom, ${}^{133}$Cs. We apply this protocol to the case of reconstruction of states in the full 16-dimensional electronic-ground subspace ($F=3 \oplus F=4$), controlled by microwaves and radio-frequency magnetic fields. We present an experimental demonstration of continuous measurement quantum tomography in an ensemble of cold cesium atoms with full control of its 16-dimensional Hilbert space. We show the exquisite level of control achieved in the lab and the excellent agreement between the theory discussed in this dissertation and the experimental results. This allows us to achieve fidelities >95% for low complexity quantum states, and >92% for arbitrary random states, which is a formidable accomplishment for a space of this size.

•Jan 1, 2012•3 citations

Continuous Measurement Quantum State Tomography of Atomic Ensembles

Carlos A. Riofrío

Quantum state tomography is a fundamental tool in quantum information processing. It allows us to estimate the state of a quantum system by measuring different observables on many identically prepared copies of the system. This is, in general, a very time-consuming task that requires a large number of measurements. There are, however, systems in which the data acquisition can be done more efficiently. In fact, an ensemble of quantum systems can be prepared and manipulated by external fields while being continuously and collectively probed, producing enough information to estimate its state. This provides a basis for continuous measurement quantum tomography. In this protocol, an ensemble of identically prepared systems is collectively probed and controlled in a time-dependent manner to create an informationally complete continuous measurement record. The measurement history is then inverted to determine the state at the initial time. We use two different estimation methods: maximum likelihood and compressed sensing. The general formalism is applied to the case of reconstruction of the quantum state encoded in the magnetic sub-levels of a large-spin alkali atom, ${}^{133}$Cs. We apply this protocol to the case of reconstruction of states in the full 16-dimensional electronic-ground subspace ($F=3 \oplus F=4$), controlled by microwaves and radio-frequency magnetic fields. We present an experimental demonstration of continuous measurement quantum tomography in an ensemble of cold cesium atoms with full control of its 16-dimensional Hilbert space. We show the exquisite level of control achieved in the lab and the excellent agreement between the theory discussed in this dissertation and the experimental results. This allows us to achieve fidelities >95% for low complexity quantum states, and >92% for arbitrary random states, which is a formidable accomplishment for a space of this size.

arXiv:1111.5627•Nov 23, 2011•2 citations

Precision-Guaranteed Quantum Tomography

Takanori Sugiyama, Peter S. Turner, Mio Murao

Quantum state tomography is currently the standard tool for verifying that a state prepared in the lab is close to an ideal target state, but up to now there have been no rigorous methods for evaluating the precision of the state preparation in tomographic experiments. We propose a new estimator for quantum state tomography, and prove that the (always physical) estimates will be close to the true prepared state with a high probability. We derive an explicit formula for evaluating how high the probability is for an arbitrary finite-dimensional system and explicitly give the one- and two-qubit cases as examples. This formula applies for any informationally complete sets of measurements, arbitrary finite number of data sets, and general loss functions including the infidelity, the Hilbert-Schmidt, and the trace distances. Using the formula, we can evaluate not only the difference between the estimated and prepared states, but also the difference between the prepared and target states. This is the first result directly applicable to the problem of evaluating the precision of estimation and preparation in quantum tomographic experiments.

arXiv:1306.4191•Physical Review Letters•Oct 17, 2013•53 citations

Efficient quantum state tomography with auxiliary systems

Wenlong Zhao, Da Zhang, Huili Zhang +2 more

Quantum state tomography is a technique in quantum information science used to reconstruct the density matrix of an unknown quantum state, providing complete information about the quantum state. It is of significant importance in fields such as quantum computation, quantum communication, and quantum simulation. However, as the size of the quantum system increases, the number of measurement settings and sampling requirements for quantum state tomography grow exponentially with the number of qubits. This not only makes experimental design and implementation more complex, but also exacerbates the consumption of experimental resources. These limitations severely hinder the application of state tomography in large-scale quantum systems. To reduce measurement settings and improve sampling efficiency, this study proposes a state tomography method based on auxiliary systems. This method can be implemented through either entanglement between the quantum system to be measured and a quantum auxiliary system or through correlation between the quantum system and a probabilistic classical auxiliary system. Measurements on the entire joint system enable more efficient extraction of information about the quantum state to be measured. This method relies on standard quantum gate operations and requires only two measurement settings, with a total sampling complexity of $O(d^2)$, significantly simplifying experimental operations and measurement processes. Additionally, this study provides two schemes for measuring purity based on the proposed circuit, one of which achieves measurement precision at the Heisenberg limit. This study validates the effectiveness of the proposed method through a detailed theoretical analysis, a series of numerical simulations, and experiments.

arXiv:2507.16532•Physical Review A•Mar 2, 2026•0 citations

Semi-Measurement-Device-Independent Quantum State Tomography

Jian Li, Jiali Zhu, Jiang Gao +2 more

As one of the fundamental tools in the quantum information field, quantum state tomography can be utilized to reconstruct any unknown state. Usually, it needs a tomographically complete set of measurements and meantime it requires that all measurements are fully characterized. Here we propose a semi-measurement-device-independent quantum state tomography protocol, which only needs one characterized measurement and a trusted ancillary system. Furthermore, we carry out corresponding experimental demonstrations by using linear optics, and obtain the average state fidelity as high as 0.973, verifying the effectiveness of the scheme.

Chinese Physics Letters•May 31, 2022•2 citations

Experimentally exploring compressed sensing quantum tomography

Adrian Steffens, Carlos A. Riofrío, Will McCutcheon +6 more

In the light of the progress in quantum technologies, the task of verifying the correct functioning of processes and obtaining accurate tomographic information about quantum states becomes increasingly important. Compressed sensing, a machinery derived from the theory of signal processing, has emerged as a feasible tool to perform robust and significantly more resource-economical quantum state tomography for intermediate-sized quantum systems. In this work, we provide a comprehensive analysis of compressed sensing tomography in the regime in which tomographically complete data is available with reliable statistics from experimental observations of a multi-mode photonic architecture. Due to the fact that the data is known with high statistical significance, we are in a position to systematically explore the quality of reconstruction depending on the number of employed measurement settings, randomly selected from the complete set of data, and on different model assumptions. We present and test a complete prescription to perform efficient compressed sensing and are able to reliably use notions of model selection and cross validation to account for experimental imperfections and finite counting statistics. Thus, we establish compressed sensing as an effective tool for quantum state tomography, specifically suited for photonic systems.

arXiv:1611.01189•Quantum Science and Technology•Apr 4, 2017•53 citations
Tomographic reconstruction of quantum states plays a fundamental role in benchmarking quantum systems and accessing information encoded in quantum-mechanical systems. Among the informationally complete sets of quantum measurements, the tight ones provide a linear reconstruction formula and minimize the propagation of statistical errors. However, implementing tight measurements in the lab is challenging due to the high number of required measurement projections, involving a series of experimental setup preparations. In this work, we introduce the notion of cyclic tight measurements, which allow us to perform full quantum state tomography while considering only repeated application of a single unitary-based quantum device during the measurement stage. This type of measurement significantly simplifies the complexity of the experimental setup required to retrieve the quantum state of a physical system. Additionally, we design a feasible setup preparation procedure that produces well-approximated cyclic tight measurements in every finite dimension.
Quantum state tomography is a fundamental tool in quantum information processing. It allows us to estimate the state of a quantum system by measuring different observables on many identically prepared copies of the system. This is, in general, a very time-consuming task that requires a large number of measurements. There are, however, systems in which the data acquisition can be done more efficiently. In fact, an ensemble of quantum systems can be prepared and manipulated by external fields while being continuously and collectively probed, producing enough information to estimate its state. This provides a basis for continuous measurement quantum tomography. In this protocol, an ensemble of identically prepared systems is collectively probed and controlled in a time-dependent manner to create an informationally complete continuous measurement record. The measurement history is then inverted to determine the state at the initial time. We use two different estimation methods: maximum likelihood and compressed sensing. The general formalism is applied to the case of reconstruction of the quantum state encoded in the magnetic sub-levels of a large-spin alkali atom, 133{}^{133}133Cs. We apply this protocol to the case of reconstruction of states in the full 16-dimensional electronic-ground subspace (F=3⊕F=4F=3 \oplus F=4F=3⊕F=4), controlled by microwaves and radio-frequency magnetic fields. We present an experimental demonstration of continuous measurement quantum tomography in an ensemble of cold cesium atoms with full control of its 16-dimensional Hilbert space. We show the exquisite level of control achieved in the lab and the excellent agreement between the theory discussed in this dissertation and the experimental results. This allows us to achieve fidelities >95% for low complexity quantum states, and >92% for arbitrary random states, which is a formidable accomplishment for a space of this size.
Quantum state tomography is a fundamental tool in quantum information processing. It allows us to estimate the state of a quantum system by measuring different observables on many identically prepared copies of the system. This is, in general, a very time-consuming task that requires a large number of measurements. There are, however, systems in which the data acquisition can be done more efficiently. In fact, an ensemble of quantum systems can be prepared and manipulated by external fields while being continuously and collectively probed, producing enough information to estimate its state. This provides a basis for continuous measurement quantum tomography. In this protocol, an ensemble of identically prepared systems is collectively probed and controlled in a time-dependent manner to create an informationally complete continuous measurement record. The measurement history is then inverted to determine the state at the initial time. We use two different estimation methods: maximum likelihood and compressed sensing. The general formalism is applied to the case of reconstruction of the quantum state encoded in the magnetic sub-levels of a large-spin alkali atom, 133{}^{133}133Cs. We apply this protocol to the case of reconstruction of states in the full 16-dimensional electronic-ground subspace (F=3⊕F=4F=3 \oplus F=4F=3⊕F=4), controlled by microwaves and radio-frequency magnetic fields. We present an experimental demonstration of continuous measurement quantum tomography in an ensemble of cold cesium atoms with full control of its 16-dimensional Hilbert space. We show the exquisite level of control achieved in the lab and the excellent agreement between the theory discussed in this dissertation and the experimental results. This allows us to achieve fidelities >95% for low complexity quantum states, and >92% for arbitrary random states, which is a formidable accomplishment for a space of this size.
Quantum state tomography is currently the standard tool for verifying that a state prepared in the lab is close to an ideal target state, but up to now there have been no rigorous methods for evaluating the precision of the state preparation in tomographic experiments. We propose a new estimator for quantum state tomography, and prove that the (always physical) estimates will be close to the true prepared state with a high probability. We derive an explicit formula for evaluating how high the probability is for an arbitrary finite-dimensional system and explicitly give the one- and two-qubit cases as examples. This formula applies for any informationally complete sets of measurements, arbitrary finite number of data sets, and general loss functions including the infidelity, the Hilbert-Schmidt, and the trace distances. Using the formula, we can evaluate not only the difference between the estimated and prepared states, but also the difference between the prepared and target states. This is the first result directly applicable to the problem of evaluating the precision of estimation and preparation in quantum tomographic experiments.
Quantum state tomography is a technique in quantum information science used to reconstruct the density matrix of an unknown quantum state, providing complete information about the quantum state. It is of significant importance in fields such as quantum computation, quantum communication, and quantum simulation. However, as the size of the quantum system increases, the number of measurement settings and sampling requirements for quantum state tomography grow exponentially with the number of qubits. This not only makes experimental design and implementation more complex, but also exacerbates the consumption of experimental resources. These limitations severely hinder the application of state tomography in large-scale quantum systems. To reduce measurement settings and improve sampling efficiency, this study proposes a state tomography method based on auxiliary systems. This method can be implemented through either entanglement between the quantum system to be measured and a quantum auxiliary system or through correlation between the quantum system and a probabilistic classical auxiliary system. Measurements on the entire joint system enable more efficient extraction of information about the quantum state to be measured. This method relies on standard quantum gate operations and requires only two measurement settings, with a total sampling complexity of O(d2)O(d^2)O(d2), significantly simplifying experimental operations and measurement processes. Additionally, this study provides two schemes for measuring purity based on the proposed circuit, one of which achieves measurement precision at the Heisenberg limit. This study validates the effectiveness of the proposed method through a detailed theoretical analysis, a series of numerical simulations, and experiments.
As one of the fundamental tools in the quantum information field, quantum state tomography can be utilized to reconstruct any unknown state. Usually, it needs a tomographically complete set of measurements and meantime it requires that all measurements are fully characterized. Here we propose a semi-measurement-device-independent quantum state tomography protocol, which only needs one characterized measurement and a trusted ancillary system. Furthermore, we carry out corresponding experimental demonstrations by using linear optics, and obtain the average state fidelity as high as 0.973, verifying the effectiveness of the scheme.
In the light of the progress in quantum technologies, the task of verifying the correct functioning of processes and obtaining accurate tomographic information about quantum states becomes increasingly important. Compressed sensing, a machinery derived from the theory of signal processing, has emerged as a feasible tool to perform robust and significantly more resource-economical quantum state tomography for intermediate-sized quantum systems. In this work, we provide a comprehensive analysis of compressed sensing tomography in the regime in which tomographically complete data is available with reliable statistics from experimental observations of a multi-mode photonic architecture. Due to the fact that the data is known with high statistical significance, we are in a position to systematically explore the quality of reconstruction depending on the number of employed measurement settings, randomly selected from the complete set of data, and on different model assumptions. We present and test a complete prescription to perform efficient compressed sensing and are able to reliably use notions of model selection and cross validation to account for experimental imperfections and finite counting statistics. Thus, we establish compressed sensing as an effective tool for quantum state tomography, specifically suited for photonic systems.