Abstract High-fidelity quantum state transfer and remote entanglement between superconducting fixed-frequency qubits have not yet been realized. In this study, we propose an alternative remote cross-resonance gate. Considering multiple modes of a superconducting coaxial cable connecting qubits, we must find conditions under which the cross-resonance gate operates with a certain accuracy even in the presence of qubit frequency shifts due to manufacturing errors. For 0.25- and 0.5 m cables, remote cross-resonance gates with a concurrence of > 99.9 % in entanglement generation are obtained even with ±10 MHz frequency shifts. For a 1 m cable with a narrow mode spacing, a concurrence of 99.5% is achieved by reducing the coupling between the qubits and cable. The optimized echoed raised-cosine pulse duration is 150–400 ns, which is similar to the operation time of cross-resonance gates between neighboring qubits on a chip. The dissipation through the cable modes does not considerably affect the obtained results. Such high-precision quantum interconnects pave the way not only for scaling up quantum computer systems but also for nonlocal connections on a chip.
Abstract High-fidelity quantum state transfer and remote entanglement between superconducting fixed-frequency qubits have not yet been realized. In this study, we propose an alternative remote cross-resonance gate. Considering multiple modes of a superconducting coaxial cable connecting qubits, we must find conditions under which the cross-resonance gate operates with a certain accuracy even in the presence of qubit frequency shifts due to manufacturing errors. For 0.25- and 0.5 m cables, remote cross-resonance gates with a concurrence of > 99.9 % in entanglement generation are obtained even with ±10 MHz frequency shifts. For a 1 m cable with a narrow mode spacing, a concurrence of 99.5% is achieved by reducing the coupling between the qubits and cable. The optimized echoed raised-cosine pulse duration is 150–400 ns, which is similar to the operation time of cross-resonance gates between neighboring qubits on a chip. The dissipation through the cable modes does not considerably affect the obtained results. Such high-precision quantum interconnects pave the way not only for scaling up quantum computer systems but also for nonlocal connections on a chip.
Abstract Highly accurate quantum state transfer and remote entanglement between superconducting fixed-frequency qubits have not yet been realized. In this study, we calculate the characteristics of a transmission path with a 1- or 0.25 m superconducting coaxial cable and use the characteristics to perform time evolution simulations of quantum state transfer and remote entanglement between superconducting fixed-frequency qubits. We find that remote entanglement, or half-quantum state transfer, can achieve a high fidelity > 99 % even in the presence of a qubit frequency detuning caused by manufacturing fluctuations, while a small qubit frequency detuning substantially reduces the efficiency of quantum state transfer. Quantum circuit simulations modeling proposed remote entanglement demonstrate that teleportation of a logical qubit with a 3 × 3 surface code, as an example of computation using remote entanglement, attains nearly the same fidelity as in-node computation for both 1- and 0.25 m cable lengths.
Direct entangling gates between spatially separated qubits are a key capability for modular quantum computing. They enable nonlocal quantum circuits to be executed across different processor modules, thereby alleviating single-chip scaling constraints and expanding the effective connectivity of the system. Here, we propose and numerically investigate a remote adiabatic controlled-Z gate between two frequency-tunable superconducting qubits connected by a multi-mode coaxial cable. The cable-mediated interaction enables the gate to be implemented without additional tunable couplers, preserving a simple circuit architecture. For a 30-cm cable, simulations incorporating ten standing-wave modes yield an optimized gate infidelity of 4.71×10−7 with a duration of 376.7 ns in the absence of decoherence. The gate maintains high fidelity under qubit-frequency fluctuations and millimeter-scale cable-length variations. Calculations for 50- and 100-cm cable situations demonstrate its potential for even larger cryogenic systems. These results provide a promising approach to extending high-fidelity quantum operations beyond individual chips and toward scalable, interconnected superconducting quantum processors.
Tunable Nonlocal ZZ Interaction for Remote Controlled-Z Gates Between Distributed Fixed-Frequency Qubits
Scaling superconducting quantum processors toward fault-tolerant operation will likely require architectures that extend beyond monolithic chips. Modular processors connected by low-loss superconducting links provide a promising route, but implementing entangling gates between remote fixed-frequency qubits remains challenging. Here we propose a distributed architecture in which two synchronously controlled double-transmon couplers mediate the interaction between fixed-frequency transmons in separate packages connected by a 25-cm coaxial cable. The scheme activates a tunable nonlocal ZZ interaction on demand while suppressing residual static coupling, allowing the superconducting link to function as a gate-native interconnect rather than solely as a state-transfer channel. Circuit-level simulations show an on/off ratio exceeding 106 and a remote controlled-Z gate with a projected coherent fidelity of 99.99% under experimentally relevant parameters. Open-system simulations further indicate that, within the representative Markovian noise model considered here, endpoint-qubit decoherence is the largest contribution to gate infidelity, while photon loss in the retained cable modes remains smaller but non-negligible. These results identify DTC-mediated tunable nonlocal coupling as a promising gate primitive for modular superconducting processors based on fixed-frequency qubits.
High-fidelity quantum interconnection remains a critical challenge for scaling up superconducting quantum chips. Here, we realize a simple fixed coupling scheme to achieve high-fidelity two-qubit gate operation across separate superconducting quantum chips. In this scheme, qubit-qubit coupling between separate chips can be realized via exchange interaction mediated by a bus resonator. By merely tuning the frequency of a single qubit, the resonant mode of the bus resonator can be modulated, enabling high-quality and stable quantum interconnection across different chips. Consequently, the experimentally implemented two-qubit gate operations between separate chips exhibit excellent performance, with a maximum two-qubit CZ gate fidelity reaching 99.57%. This work lays a technical foundation for the realization of high-fidelity chip-to-chip quantum interconnection, which facilitates the development of large-scale superconducting quantum chips with high fidelity.
Superconducting qubit systems, one of the leading candidates for universal quantum computing, face scalability challenges such as frequency crowding, wiring complexity, and packaging problems. Distributed quantum computing offers a viable strategy for constructing larger quantum information processing systems. Yet, direct universal quantum gates between remote qubits-critical to distributed architectures-remain unrealized. Here, we demonstrate direct high-fidelity entangling gates between two remote superconducting quantum processors separated by a 30 cm distance, utilizing standing-wave modes in their connecting coaxial cable. We achieve cross-entropy benchmarking fidelities of (99.15±0.02)% and (98.03±0.04)% for the controlled-not and controlled-z gates, respectively, outperforming state transfer and feedback-based protocols in fidelity and efficiency. This advancement significantly enhances the prospect of universal distributed quantum information processing, which is the critical step toward future large-scale quantum systems.
Maintaining or even improving gate performance with growing numbers of parallel controlled qubits is a vital requirement for fault-tolerant quantum computing.For superconducting quantum processors, though isolated one-or two-qubit gates have been demonstrated with high fidelity, implementing these gates in parallel commonly shows worse performance.Generally, this degradation is attributed to various crosstalks between qubits, such as quantum crosstalk due to residual inter-qubit coupling.An understanding of the exact nature of these crosstalks is critical to figuring out respective mitigation schemes and improved qubit architecture designs with low crosstalk.Here we give a theoretical analysis of quantum crosstalk impact on simultaneous gate operations in a qubit architecture, where fixed-frequency transmon qubits are coupled via a tunable bus, and sub-100-ns controlled-Z (CZ) gates can be realized by applying a baseband flux pulse on the bus.Our analysis shows that for microwave-driven single-qubit gates, the dressing from the qubit-qubit coupling can cause non-negligible cross-driving errors when qubits operate near frequency collision regions.During CZ gate operations, although unwanted nearest-neighbor interactions are nominally turned off, sub-MHz parasitic next-nearest-neighbor interactions involving spectator qubits can still exist, causing considerable leakage or control error when one operates qubit systems around these parasitic resonance points.To ensure high-fidelity simultaneous operations, a request could be raised to figure out a better way to balance the gate error from target qubit systems themselves and the error from nonparticipating spectator qubits.Overall, our analysis suggests that towards useful quantum processors, the qubit architecture should be examined carefully in the context of high-fidelity simultaneous gate operations in a scalable qubit lattice.