To exploit the subnanometer dimensions of qubits for large-scale quantum information processing, corresponding control architectures require both energy and space efficiency, with the on-chip footprint of unit-cell electronics ideally being micrometer scale; however, the spin coherence of qubits in close packing is severely deteriorated by microwave crosstalk from neighboring control sites. Here, we present a crosstalk-mitigation scheme using foundry microelectronics to address solid-state spins at sub-100- μ m spacing without the need for qubit detuning. Using nitrogen-vacancy centers in nanodiamonds as qubit prototypes, we first demonstrate 10-MHz Rabi oscillations at milliwatt-level microwave power. By implementing active cancellation, we then demonstrate that the crosstalk field from neighboring lattice sites can be reduced to undetectable levels. We finally extend the scheme to show increased qubit control, or, effectively, enhanced spin coherence under crosstalk mitigation. Compatible with integrated optics, our results present a step toward scalable control across quantum platforms using silicon microelectronics.
To exploit the subnanometer dimensions of qubits for large-scale quantum information processing, corresponding control architectures require both energy and space efficiency, with the on-chip footprint of unit-cell electronics ideally being micrometer scale; however, the spin coherence of qubits in close packing is severely deteriorated by microwave crosstalk from neighboring control sites. Here, we present a crosstalk-mitigation scheme using foundry microelectronics to address solid-state spins at sub-100- μ m spacing without the need for qubit detuning. Using nitrogen-vacancy centers in nanodiamonds as qubit prototypes, we first demonstrate 10-MHz Rabi oscillations at milliwatt-level microwave power. By implementing active cancellation, we then demonstrate that the crosstalk field from neighboring lattice sites can be reduced to undetectable levels. We finally extend the scheme to show increased qubit control, or, effectively, enhanced spin coherence under crosstalk mitigation. Compatible with integrated optics, our results present a step toward scalable control across quantum platforms using silicon microelectronics.
The growing interest in quantum computers has triggered various approaches for the realization of a large-scale quantum processor that can eventually outperform classical high-performance computers. Quantum computers are attracting increasing attention for their potential to enormously accelerate the simulation of quantum systems and the solution of optimization problems, promising an immense impact, particularly in fields such as chemistry, medicine, and cybersecurity. Although it is still a long way to a practical quantum device, the progress over the last decades has shown encouraging results for a so far limited number of quantum bits, or qubits for short, which represent the computational units of the processor. One promising platform for the implementation of qubits is the spin of charge carriers in semiconductor quantum dots. Especially the use of purified silicon as a host material has significantly improved the performance of quantum operations. Advanced fabrication techniques from the established semiconductor industry in principle allow for the manufacturing of a large number of qubits on a small chip, making them specifically competitive from the perspective of scalability. In this thesis, we investigate challenges for electron spin qubits, particularly in the context of scaling to large qubit arrays for quantum computation. We evaluate the performance of quantum gates, present error mitigation strategies, and propose new quantum operations for two particular spin qubit implementations. In a dense array of Loss-DiVincenzo spin qubits on a chip, quantum information can be electrically controlled by microwave pulses. For neighboring qubits, capacitive couplings of nearby electrodes lead to crosstalk that affects the quantum computation. The first examination in this thesis addresses the effect of crosstalk on idling and operating spin qubits due to an interfering microwave drive. After the analysis and characterization of the performance, we suggest mitigation protocols for different constellations of important quantum gates, which can be easily implemented experimentally. We further show how to reduce crosstalk in a two-qubit gate using an asymmetric driving scheme, resulting in an enormous improvement of the gate performance, and may be used to generally overcome the obstacle of crosstalk. An additional source of errors in spin qubit registers originates from the finite residual exchange interaction between neighboring qubits. It arises due to a finite overlap of the electron wave functions and is caused by the limited speed at which the applied voltages can be controlled. We evaluate the fidelity of doing quantum operations under these circumstances with a varying number of neighboring qubits and present robust mitigation schemes with a decent performance also in the presence of noise. Besides crosstalk, another crucial observation in experiments using microwaves is the heating caused by the delivery of high-power radio frequency pulses to the quantum chip and results in a change of the qubit properties. We therefore investigate the impact of phonons on the energy levels in spin qubits to identify a temperature-dependent correction to the qubit state splitting. As microwave pulses are associated with potential errors, exchange-only qubits represent a promising alternative to achieve universal quantum computation only using baseband control. Therefore, we shift our focus towards exchange-only qubits and outline the main error sources in these systems, including residual exchange interactions between spins, charge noise from the applied voltages, and magnetic fluctuations in the material. A consequential complication of this implementation is that the quantum information can leak out of the qubit states. This effect, however, can be reduced in the presence of a finite magnetic field, as we will demonstrate in this thesis. The gate construction for exchange-only qubits usually requires more pulse steps than in the previous qubit type. Nevertheless, if exchange interactions are switched on simultaneously, this can result in faster quantum gates, as we demonstrate in this thesis. Especially the discovery of a quantum operation that introduces relative phases between computational and leakage states can be of interest for the construction of two-qubit gates and will be discussed in an example for a special operation space.
Accurate and efficient implementation of parallel quantum gates is crucial for scalable quantum information processing. However, the unavoidable crosstalk between qubits in current noisy processors impedes the achievement of high gate fidelities and renders full Hilbert-space control optimization prohibitively difficult. Here, we overcome this challenge by reducing the full-system optimization to crosstalk-robust control over constant-sized subsystems, which dramatically reduces the computational cost. Our method effectively eliminates the leading-order gate operation deviations induced by crosstalk, thereby suppressing error rates. Within this framework, we construct analytical pulse solutions for parallel single-qubit gates and numerical pulses for parallel multi-qubit operations. We validate the proposed approach numerically across multiple platforms, including coupled nitrogen-vacancy centers, a nuclear-spin processor, and superconducting-qubit arrays with up to 200 qubits. As a result, the noise scaling is reduced from exponential to linear for parallel single-qubit gates, and an order-of-magnitude reduction is achieved for parallel multi-qubit gates. Moreover, our method does not require precise knowledge of crosstalk strengths and makes no assumption about the underlying qubit connectivity or lattice geometry, thereby establishing a scalable framework for parallel quantum control in large-scale quantum architectures.
Improving gate performance is vital for scalable quantum computing. Universal quantum computing also requires gate fidelity to reach a high level. For a superconducting quantum processor, which operates in the microwave band, the single-qubit gates are usually realized with microwave driving. The crosstalk between microwave pulses is a non-negligible error source. In this article, we propose an error mitigation scheme to address this crosstalk issue for single-qubit gates. There are three steps in our method. First, by controlling the detuning between qubits, the microwave induced classical crosstalk error can be constrained within the computational subspace. Second, by applying the general decomposition procedure, the arbitrary single-qubit gate can be decomposed as a sequence of X and virtual Z gates. Finally, by optimizing the parameters in virtual Z gates, the error constrained in the computational space can be corrected. Using our method, no additional compensation signals are needed, arbitrary single-qubit gate time will not be prolonged, and the circuit depth containing simultaneous single-qubit gates will also not increase. The simulation results show that, in a specific regime of qubit–qubit detuning, the infidelities of simultaneous single-qubit gates can be as low as that without microwave crosstalk.
Single-qubit gates on superconducting quantum processors are typically implemented using microwave pulses applied through dedicated control lines. However, these microwave pulses may also drive other qubits due to crosstalk arising from capacitive coupling and wavefunction overlap in systems with closely spaced transition frequencies. Crosstalk and frequency crowding increase errors during simultaneous single-qubit operations relative to isolated gates, thus forming a major bottleneck for scaling superconducting quantum processors. In this work, we combine model-based qubit frequency optimization with pulse shaping to demonstrate crosstalk error mitigation in single-qubit gates on a 49-qubit superconducting quantum processor. We introduce and experimentally verify an analytical model of simultaneous single-qubit gate error caused by microwave crosstalk that depends on a given pulse shape. By employing a model-based optimization strategy of qubit frequencies, we minimize the crosstalk-induced error across the processor and achieve a mean simultaneous single-qubit gate fidelity of 99.96% for a 16-ns gate duration, approaching the mean individual gate fidelity. To further reduce the simultaneous error and required qubit frequency bandwidth on high-crosstalk qubit pairs, we introduce a crosstalk transition suppression (CTS) pulse shaping technique that minimizes the spectral energy around transitions inducing leakage and crosstalk errors. Finally, we combine CTS with model-based frequency optimization across the device and experimentally show a systematic reduction in the required qubit frequency bandwidth for high-fidelity simultaneous gates, supported by simulations of systems with up to 1000 qubits. By alleviating constraints on qubit frequency bandwidth for parallel single-qubit operations, this work represents an important step for scaling towards larger quantum processors.
A central aim of quantum information processing is the efficient entanglement of multiple stationary quantum memories via photons. Among solid-state systems, the nitrogen-vacancy centre in diamond has emerged as an excellent optically addressable memory with second-scale electron spin coherence times. Recently, quantum entanglement and teleportation have been shown between two nitrogen-vacancy memories, but scaling to larger networks requires more efficient spin-photon interfaces such as optical resonators. Here we report such nitrogen-vacancy-nanocavity systems in the strong Purcell regime with optical quality factors approaching 10,000 and electron spin coherence times exceeding 200 μs using a silicon hard-mask fabrication process. This spin-photon interface is integrated with on-chip microwave striplines for coherent spin control, providing an efficient quantum memory for quantum networks. Nitrogen-vacancy centres in diamond have established themselves as excellent candidates for solid-state quantum memories due to their optical addressability and long coherence times. Here, the authors report on a diamond-nanocavity system with improved spin-photon interface performances.
The NV centre in diamond has a long history in advancing quantum photonics technologies. Large-scale applications requires compatibility with integrated photonics for routing, with microelectronics integration equivalently important to realise control. Research to date has concentrated on microwires on diamond or in-house metallisation. In this work, we demonstrate integration of NV in nanodiamonds with silicon microelectronics. A key merit here is exploiting multi-layer metallisation for vector control and routing driving signals. We employ a 0.13um CMOS technology with seven metallic layers: the top layer for static magnetic fields with microwave control in the layer below, across 50μm spaced unit cells. Alignment markers enable lithographic positioning of nanodiamonds with associated NVs. We coherently control a positioned NV using the silicon structure and observe fifty times less power is required compared to an external antenna. The prototype paves the way for integrating solid-state quantum systems with sophisticated microelectronics, leveraging proximal silicon logic.