Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2403.07242 · PRX Quantum

High-Fidelity Two-Qubit Gates between Fluxonium Qubits with a Resonator Coupler

Emma Rosenfeld, Connor T. Hann, David Schuster, Matthew H. Matheny, Aashish A. Clerk

Published Nov 1, 2024• 13 citations
arXivHTMLPDF

Abstract

We take a bottom-up first-principles approach to designing a two-qubit gate between fluxonium qubits for minimal error, speed, and control simplicity. Our proposed architecture consists of two fluxoniums coupled via a resonator. The use of a simple linear coupler has many practical benefits, including the possibility of material optimization for suppressing loss, reducing fabrication complexity, and increasing yield by circumventing the need for Josephson junctions. Crucially, a resonator-as-coupler approach also suggests a clear path to increased connectivity between fluxonium qubits, by reducing capacitive loading when the coupler has a high impedance. After performing analytic and numerical analyses of the circuit Hamiltonian and gate dynamics, we tune circuit parameters to destructively interfere sources of coherent error, revealing an efficient fourth-order scaling of coherent error with gate duration. For component properties from the literature, we predict an open-system average controlled- Z () gate infidelity of 1.86 × 10 − 4 in 70 ns. Published by the American Physical Society 2024

DOI
10.1103/prxquantum.5.040317

Related papers

Tunable coupling scheme for implementing two-qubit gates on fluxonium qubits

Ilya N. Moskalenko, Ilya S. Besedin, Ilya A. Simakov +1 more

A superconducting fluxonium circuit is an RF-superconducting quantum interference device-type flux qubit that uses a large inductance built from an array of Josephson junctions or a high kinetic inductance material. This inductance suppresses charge sensitivity exponentially and flux sensitivity quadratically. In contrast to the transmon qubit, the anharmonicity of fluxonium can be large and positive, allowing for better separation between the low energy qubit manifold of the circuit and higher-lying excited states. Here, we propose a tunable coupling scheme for implementing two-qubit gates on fixed-frequency fluxonium qubits, biased at half flux quantum. In this system, both qubits and couplers are coupled capacitively and implemented as fluxonium circuits with an additional harmonic mode. We investigate the performance of the scheme by simulating a universal two-qubit fSim gate. In the proposed approach, we rely on a planar on-chip architecture for the whole device. Our design is compatible with existing hardware for transmon-based devices with the additional advantage of lower qubit frequency facilitating high-precision gating.

arXiv:2107.11550•Applied Physics Letters•Nov 8, 2021•35 citations

Crosstalk in multiqubit fluxonium architectures with transmon couplers

Anonymous, Christian Kraglund Andersen

In recent years, several architectures have been proposed for implementing two-qubit operations on fluxonium superconducting qubits. A particularly promising approach, which was demonstrated experimentally by Refs. [L. Ding , S. Singh ], employs a transmon superconducting qubit as a tunable coupler between the fluxonium qubits. These experiments have shown that the transmon coupler enables fast, high-fidelity two-qubit operations while suppressing unwanted Z Z crosstalk between the fluxonium qubits. In this work, we numerically study the scalability of this architecture. We find that, when trivially scaling this architecture, crosstalk from spectator qubits limits the gate fidelity to below 90%. We show that these spectator errors can be reduced to below 10 − 4 by reducing the coupling strength and by dynamically tuning transmons that are not used for a two-qubit operation to an off position. We further investigate the resilience of the operation to direct capacitive coupling between the transmon couplers and to microwave crosstalk.

Physical Review Applied•Jul 27, 2026•0 citations

Crosstalk in Multi-Qubit Fluxonium Architectures with Transmon Couplers

Martijn F. S. Zwanenburg, Christian Kraglund Andersen

In recent years, several architectures have been proposed for implementing two-qubit operations on fluxonium superconducting qubits. A particularly promising approach, which was demonstrated experimentally by Refs. [1,2], employs a transmon superconducting qubit as a tunable coupler between the fluxonium qubits. These experiments have shown that the transmon coupler enables fast, high-fidelity two-qubit operations while suppressing unwanted ZZ crosstalk between the fluxonium qubits. In this work, we numerically study the scalability of this architecture. We find that, when trivially scaling this architecture, crosstalk from spectator qubits limits the gate fidelity to below 90%. We show that these spectator errors can be reduced to below $10^{-4}$ by reducing the coupling strength and by dynamically tuning transmons that are not used for a two-qubit operation to an off position. We further investigate the resilience of the operation to direct capacitive coupling between the transmon couplers and to microwave crosstalk.

quant-pharXiv:2603.09870•Mar 11, 2026•0 citations

A double-resonator coupler for high-fidelity two-qubit gates between superconducting qubits

Seunghyeon Jin, Seungha Woo, Shinyoung Hwang +6 more

Tunable couplers have enabled two-qubit gate fidelities in superconducting quantum processors to approach $99.9\%$, yet simultaneously suppressing residual interactions and maintaining flexible qubit-frequency allocation remain central challenges for scaling. Here, we propose a double-resonator coupler (DRC) consisting of two resonators interconnected by a single Josephson junction and a capacitor. The hybridized resonator modes provide two mediated exchange paths whose interference controls the qubit-qubit interaction. The DRC enables complete cancellation of residual $ZZ$ interaction for qubit-qubit detunings well outside the straddling regime, even in the absence of direct qubit-qubit coupling, thereby relaxing constraints on frequency allocation and qubit placement. Away from the idle point, the same circuit provides a strong $ZZ$ interaction of approximately $70\,\mathrm{MHz}$, enabling a $20\,\mathrm{ns}$ controlled-Z gate with simulated coherent infidelity below $10^{-5}$. These results establish the DRC as a flexible single-junction coupler architecture for high-fidelity superconducting quantum processors.

quant-pharXiv:2609.05222•Sep 7, 2026•0 citations

Tunable Inductive Coupler for High-Fidelity Gates Between Fluxonium Qubits

Helin Zhang, Chunyang Ding, Daniel Weiss +9 more

The fluxonium qubit is a promising candidate for quantum computation due to its long coherence times and large anharmonicity. We present a tunable coupler that realizes strong inductive coupling between two heavy-fluxonium qubits, each with approximately 50 -MHz frequencies and approximately 5 -GHz anharmonicities. The coupler enables the qubits to have a large tuning range of X X coupling strengths ( − 35 to 75 MHz). The Z Z coupling strength is < 3 kHz across the entire coupler bias range and < 100 Hz at the coupler off position. These qualities lead to fast high-fidelity single- and two-qubit gates. By driving at the difference frequency of the two qubits, we realize a i SWAP gate in 258 ns with fidelity 99.72%, and by driving at the sum frequency of the two qubits, we achieve a b SWAP gate in 102 ns with fidelity 99.91%. This latter gate is only five qubit Larmor periods in length. We run cross-entropy benchmarking for over 20 consecutive hours and measure stable gate fidelities, with b SWAP drift ( 2 σ ) < 0.02 % and i SWAP drift < 0.08 % . Published by the American Physical Society 2024

PRX Quantum•May 2, 2024•63 citations

Fast microwave-driven two-qubit gates between fluxonium qubits with a transmon coupler

Siddharth Singh, Eugene Y. Huang, Jinlun Hu +6 more

Two qubit gates constitute fundamental building blocks in the realization of large-scale quantum devices. Using superconducting circuits, two-qubit gates have previously been implemented in different ways with each method aiming to maximize gate fidelity. Another important goal of a new gate scheme is to minimize the complexity of gate calibration. In this work, we demonstrate a high-fidelity two-qubit gate between two fluxonium qubits enabled by an intermediate capacitively coupled transmon. The coupling strengths between the qubits and the coupler are designed to minimize residual crosstalk while still allowing for fast gate operations. The gate is based on frequency selectively exciting the coupler using a microwave drive to complete a 2$π$ rotation, conditional on the state of the fluxonium qubits. When successful, this drive scheme implements a conditional phase gate. Using analytically derived pulse shapes, we minimize unwanted excitations of the coupler and obtain gate errors of $10^{-2}$ for gate times below 60~ns. At longer durations, our gate is limited by relaxation of the coupler. Our results show how carefully designed control pulses can speed up frequency selective entangling gates.

arXiv:2504.13718•Physical Review Applied•Oct 28, 2025•5 citations
We take a bottom-up first-principles approach to designing a two-qubit gate between fluxonium qubits for minimal error, speed, and control simplicity. Our proposed architecture consists of two fluxoniums coupled via a resonator. The use of a simple linear coupler has many practical benefits, including the possibility of material optimization for suppressing loss, reducing fabrication complexity, and increasing yield by circumventing the need for Josephson junctions. Crucially, a resonator-as-coupler approach also suggests a clear path to increased connectivity between fluxonium qubits, by reducing capacitive loading when the coupler has a high impedance. After performing analytic and numerical analyses of the circuit Hamiltonian and gate dynamics, we tune circuit parameters to destructively interfere sources of coherent error, revealing an efficient fourth-order scaling of coherent error with gate duration. For component properties from the literature, we predict an open-system average controlled- Z () gate infidelity of 1.86 × 10 − 4 in 70 ns. Published by the American Physical Society 2024
A superconducting fluxonium circuit is an RF-superconducting quantum interference device-type flux qubit that uses a large inductance built from an array of Josephson junctions or a high kinetic inductance material. This inductance suppresses charge sensitivity exponentially and flux sensitivity quadratically. In contrast to the transmon qubit, the anharmonicity of fluxonium can be large and positive, allowing for better separation between the low energy qubit manifold of the circuit and higher-lying excited states. Here, we propose a tunable coupling scheme for implementing two-qubit gates on fixed-frequency fluxonium qubits, biased at half flux quantum. In this system, both qubits and couplers are coupled capacitively and implemented as fluxonium circuits with an additional harmonic mode. We investigate the performance of the scheme by simulating a universal two-qubit fSim gate. In the proposed approach, we rely on a planar on-chip architecture for the whole device. Our design is compatible with existing hardware for transmon-based devices with the additional advantage of lower qubit frequency facilitating high-precision gating.
In recent years, several architectures have been proposed for implementing two-qubit operations on fluxonium superconducting qubits. A particularly promising approach, which was demonstrated experimentally by Refs. [L. Ding , S. Singh ], employs a transmon superconducting qubit as a tunable coupler between the fluxonium qubits. These experiments have shown that the transmon coupler enables fast, high-fidelity two-qubit operations while suppressing unwanted Z Z crosstalk between the fluxonium qubits. In this work, we numerically study the scalability of this architecture. We find that, when trivially scaling this architecture, crosstalk from spectator qubits limits the gate fidelity to below 90%. We show that these spectator errors can be reduced to below 10 − 4 by reducing the coupling strength and by dynamically tuning transmons that are not used for a two-qubit operation to an off position. We further investigate the resilience of the operation to direct capacitive coupling between the transmon couplers and to microwave crosstalk.
In recent years, several architectures have been proposed for implementing two-qubit operations on fluxonium superconducting qubits. A particularly promising approach, which was demonstrated experimentally by Refs. [1,2], employs a transmon superconducting qubit as a tunable coupler between the fluxonium qubits. These experiments have shown that the transmon coupler enables fast, high-fidelity two-qubit operations while suppressing unwanted ZZ crosstalk between the fluxonium qubits. In this work, we numerically study the scalability of this architecture. We find that, when trivially scaling this architecture, crosstalk from spectator qubits limits the gate fidelity to below 90%. We show that these spectator errors can be reduced to below 10−410^{-4}10−4 by reducing the coupling strength and by dynamically tuning transmons that are not used for a two-qubit operation to an off position. We further investigate the resilience of the operation to direct capacitive coupling between the transmon couplers and to microwave crosstalk.
Tunable couplers have enabled two-qubit gate fidelities in superconducting quantum processors to approach 99.9%99.9\%99.9%, yet simultaneously suppressing residual interactions and maintaining flexible qubit-frequency allocation remain central challenges for scaling. Here, we propose a double-resonator coupler (DRC) consisting of two resonators interconnected by a single Josephson junction and a capacitor. The hybridized resonator modes provide two mediated exchange paths whose interference controls the qubit-qubit interaction. The DRC enables complete cancellation of residual ZZZZZZ interaction for qubit-qubit detunings well outside the straddling regime, even in the absence of direct qubit-qubit coupling, thereby relaxing constraints on frequency allocation and qubit placement. Away from the idle point, the same circuit provides a strong ZZZZZZ interaction of approximately 70 MHz70\,\mathrm{MHz}70MHz, enabling a 20 ns20\,\mathrm{ns}20ns controlled-Z gate with simulated coherent infidelity below 10−510^{-5}10−5. These results establish the DRC as a flexible single-junction coupler architecture for high-fidelity superconducting quantum processors.
The fluxonium qubit is a promising candidate for quantum computation due to its long coherence times and large anharmonicity. We present a tunable coupler that realizes strong inductive coupling between two heavy-fluxonium qubits, each with approximately 50 -MHz frequencies and approximately 5 -GHz anharmonicities. The coupler enables the qubits to have a large tuning range of X X coupling strengths ( − 35 to 75 MHz). The Z Z coupling strength is < 3 kHz across the entire coupler bias range and < 100 Hz at the coupler off position. These qualities lead to fast high-fidelity single- and two-qubit gates. By driving at the difference frequency of the two qubits, we realize a i SWAP gate in 258 ns with fidelity 99.72%, and by driving at the sum frequency of the two qubits, we achieve a b SWAP gate in 102 ns with fidelity 99.91%. This latter gate is only five qubit Larmor periods in length. We run cross-entropy benchmarking for over 20 consecutive hours and measure stable gate fidelities, with b SWAP drift ( 2 σ ) < 0.02 % and i SWAP drift < 0.08 % . Published by the American Physical Society 2024
Two qubit gates constitute fundamental building blocks in the realization of large-scale quantum devices. Using superconducting circuits, two-qubit gates have previously been implemented in different ways with each method aiming to maximize gate fidelity. Another important goal of a new gate scheme is to minimize the complexity of gate calibration. In this work, we demonstrate a high-fidelity two-qubit gate between two fluxonium qubits enabled by an intermediate capacitively coupled transmon. The coupling strengths between the qubits and the coupler are designed to minimize residual crosstalk while still allowing for fast gate operations. The gate is based on frequency selectively exciting the coupler using a microwave drive to complete a 2πππ rotation, conditional on the state of the fluxonium qubits. When successful, this drive scheme implements a conditional phase gate. Using analytically derived pulse shapes, we minimize unwanted excitations of the coupler and obtain gate errors of 10−210^{-2}10−2 for gate times below 60~ns. At longer durations, our gate is limited by relaxation of the coupler. Our results show how carefully designed control pulses can speed up frequency selective entangling gates.