Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2402.10438 · Physical Review A

Broadband spectroscopy of quantum noise

Yuanlong Wang, Gerardo A. Paz-Silva

Published May 5, 2025• 8 citations
arXivHTMLPDF

Abstract

Characterizing noise is key to the optimal control of the quantum system it affects. Using a single-qubit probe and appropriate sequences of $\ensuremath{\pi}$ and non-$\ensuremath{\pi}$ pulses, we show how one can characterize the noise a quantum bath generates across a wide range of frequencies---including frequencies below the limit set by the probe's ${\mathbb{T}}_{2}$ time. To do so we leverage an exact expression for the dynamics of the probe in the presence of non-$\ensuremath{\pi}$ pulses and a general inequality between the symmetric (classical) and antisymmetric (quantum) components of the noise spectrum generated by a Gaussian bath. We analyze the robustness of our method on state-preparation and measurement errors and pulse imperfection. Simulation demonstrates the effectiveness of our method.

DOI
10.1103/physreva.111.052407

Related papers

Qubit Noise Spectroscopy for Non-Gaussian Dephasing Environments

Leigh Norris, Gerardo A. Paz-Silva, Lorenza Viola

We introduce open-loop quantum control protocols for characterizing the spectral properties of non-Gaussian noise, applicable to both classical and quantum dephasing environments. By engineering a multidimensional frequency comb via repetition of suitably designed pulse sequences, the desired high-order spectra may be related to observable properties of the qubit probe. We prove that access to a high time resolution is key to achieving spectral reconstruction over an extended bandwidth, overcoming the limitations of existing schemes. Non-Gaussian spectroscopy is demonstrated for a classical noise model describing quadratic dephasing at an optimal point, as well as a quantum spin-boson model out of equilibrium. In both cases, we obtain spectral reconstructions that accurately predict the qubit dynamics in the non-Gaussian regime.

arXiv:1512.01575•Physical Review Letters•Apr 14, 2016•154 citations

Noise-robust quantum sensing via optimal multi-probe spectroscopy

Matthias M. Müller, Stefano Gherardini, Filippo Caruso

The dynamics of quantum systems are unavoidably influenced by their environment, but in turn observing a quantum system (probe) can allow one to measure its environment: Measurements and controlled manipulation of the probe such as dynamical decoupling sequences as an extension of the Ramsey interference measurement allow to spectrally resolve a noise field coupled to the probe. Here, we introduce fast and robust estimation strategies for the characterization of the spectral properties of classical and quantum dephasing environments. These strategies are based on filter function orthogonalization, optimal control filters maximizing the relevant Fisher Information and multi-qubit entanglement. We investigate and quantify the robustness of the schemes under different types of noise such as finite-precision measurements, dephasing of the probe, spectral leakage and slow temporal fluctuations of the spectrum.

arXiv:1801.10220•Scientific Reports•Sep 18, 2018•31 citations

Fourier transform noise spectroscopy

Arian Vezvaee, Nanako Shitara, Shuo Sun +1 more

Abstract Spectral characterization of noise environments that lead to the decoherence of qubits is critical to developing robust quantum technologies. While dynamical decoupling offers one of the most successful approaches to characterize noise spectra, it necessitates applying large sequences of π pulses that increase the complexity and cost of the method. Here, we introduce a noise spectroscopy method that utilizes only the Fourier transform of free induction decay or spin echo measurements, thus removing the need for the application many π pulses. We show that our method faithfully recovers the correct noise spectra for a variety of different environments (including 1/f-type noise) and outperforms previous dynamical decoupling schemes while significantly reducing their experimental overhead. We also discuss the experimental feasibility of our proposal and demonstrate its robustness in the presence of statistical measurement error. Our method is applicable to a wide range of quantum platforms and provides a simpler path toward a more accurate spectral characterization of quantum devices, thus offering possibilities for tailored decoherence mitigation.

arXiv:2210.00386•npj Quantum Information•May 17, 2024•15 citations

Qubit control noise spectroscopy with optimal suppression of dephasing

Vivian Maloney, Yasuo Oda, Gregory Quiroz +2 more

We extend quantum noise spectroscopy (QNS) of amplitude control noise to settings where dephasing noise or detuning errors make significant contributions to qubit dynamics. Previous approaches to characterize amplitude noise are limited by their vulnerability to low-frequency dephasing noise and static detuning errors, which can overwhelm the target control noise signal and introduce bias into estimates of the amplitude noise spectrum. To overcome this problem, we leverage optimal control to identify a family of amplitude control waveforms that optimally suppress low-frequency dephasing noise and detuning errors, while maintaining the spectral concentration in the amplitude filter essential for spectral estimation. The waveforms found via numerical optimization have surprisingly simple analytic forms, consisting of oscillating sine waves obeying particular amplitude and frequency constraints. In numerically simulated QNS experiments, these waveforms demonstrate superior robustness, enabling accurate estimation of the amplitude noise spectrum in regimes where existing approaches are biased by low-frequency dephasing noise and detuning errors.

arXiv:2204.10894•Physical Review A•Aug 23, 2022•15 citations

Noise Spectroscopy Using Correlations of Single-Shot Qubit Readout

T. Fink, Hendrik Bluhm

A better understanding of the noise causing qubit decoherence is crucial for improving qubit performance. The noise spectrum affecting the qubit may be extracted by measuring dephasing under the application of pulse sequences but requires accurate qubit control and sufficiently long relaxation times, which are not always available. Here, we describe an alternative method to extract the spectrum from correlations of single-shot measurement outcomes of successive free induction decays. This method only requires qubit initialization and readout with a moderate fidelity and also allows independent tuning of both the overall sensitivity and the frequency region over which it is sensitive. Thus, it is possible to maintain a good detection contrast over a very wide frequency range. We discuss using our method for measuring both 1/f noise and the fluctuation spectrum of the nuclear bath of GaAs spin qubits.

arXiv:1207.6881•Physical Review Letters•Jan 2, 2013•29 citations

Direct characterization of classical dephasing noise for a qubit

Yuan-De Jin, Zheng-Fei Ye, Wen-Long Ma

We propose a general method to characterize classical stochastic noise causing qubit dephasing through repetitive Ramsey interferometry measurements (RIMs) on the qubit. Compared to filter-function-based spectroscopy, our method with simpler pulse control is less constrained by probe coherence time and can directly detect arbitrary-order correlation functions of quasistatic noise processes. We show that each RIM with a short evolution time and suitably chosen control pulses directly samples the noise field and the $n$-point correlations of the RIM outcomes are proportional to the $n$-point correlation functions of the noise processes. We demonstrate the method numerically for two representative cases: an Ornstein-Uhlenbeck Gaussian process and a non-Gaussian ensemble of two-level fluctuators. While practical constraints such as readout contrast and sampling cost persist, our method offers a direct route to quasistatic classical noise spectroscopy across diverse platforms.

quant-pharXiv:2604.25705•Physical Review A•Apr 29, 2026•0 citations
Characterizing noise is key to the optimal control of the quantum system it affects. Using a single-qubit probe and appropriate sequences of \ensuremathπ\ensuremath{\pi}\ensuremathπ and non-\ensuremathπ\ensuremath{\pi}\ensuremathπ pulses, we show how one can characterize the noise a quantum bath generates across a wide range of frequencies---including frequencies below the limit set by the probe's T2{\mathbb{T}}_{2}T2​ time. To do so we leverage an exact expression for the dynamics of the probe in the presence of non-\ensuremathπ\ensuremath{\pi}\ensuremathπ pulses and a general inequality between the symmetric (classical) and antisymmetric (quantum) components of the noise spectrum generated by a Gaussian bath. We analyze the robustness of our method on state-preparation and measurement errors and pulse imperfection. Simulation demonstrates the effectiveness of our method.
We introduce open-loop quantum control protocols for characterizing the spectral properties of non-Gaussian noise, applicable to both classical and quantum dephasing environments. By engineering a multidimensional frequency comb via repetition of suitably designed pulse sequences, the desired high-order spectra may be related to observable properties of the qubit probe. We prove that access to a high time resolution is key to achieving spectral reconstruction over an extended bandwidth, overcoming the limitations of existing schemes. Non-Gaussian spectroscopy is demonstrated for a classical noise model describing quadratic dephasing at an optimal point, as well as a quantum spin-boson model out of equilibrium. In both cases, we obtain spectral reconstructions that accurately predict the qubit dynamics in the non-Gaussian regime.
The dynamics of quantum systems are unavoidably influenced by their environment, but in turn observing a quantum system (probe) can allow one to measure its environment: Measurements and controlled manipulation of the probe such as dynamical decoupling sequences as an extension of the Ramsey interference measurement allow to spectrally resolve a noise field coupled to the probe. Here, we introduce fast and robust estimation strategies for the characterization of the spectral properties of classical and quantum dephasing environments. These strategies are based on filter function orthogonalization, optimal control filters maximizing the relevant Fisher Information and multi-qubit entanglement. We investigate and quantify the robustness of the schemes under different types of noise such as finite-precision measurements, dephasing of the probe, spectral leakage and slow temporal fluctuations of the spectrum.
Abstract Spectral characterization of noise environments that lead to the decoherence of qubits is critical to developing robust quantum technologies. While dynamical decoupling offers one of the most successful approaches to characterize noise spectra, it necessitates applying large sequences of π pulses that increase the complexity and cost of the method. Here, we introduce a noise spectroscopy method that utilizes only the Fourier transform of free induction decay or spin echo measurements, thus removing the need for the application many π pulses. We show that our method faithfully recovers the correct noise spectra for a variety of different environments (including 1/f-type noise) and outperforms previous dynamical decoupling schemes while significantly reducing their experimental overhead. We also discuss the experimental feasibility of our proposal and demonstrate its robustness in the presence of statistical measurement error. Our method is applicable to a wide range of quantum platforms and provides a simpler path toward a more accurate spectral characterization of quantum devices, thus offering possibilities for tailored decoherence mitigation.
We extend quantum noise spectroscopy (QNS) of amplitude control noise to settings where dephasing noise or detuning errors make significant contributions to qubit dynamics. Previous approaches to characterize amplitude noise are limited by their vulnerability to low-frequency dephasing noise and static detuning errors, which can overwhelm the target control noise signal and introduce bias into estimates of the amplitude noise spectrum. To overcome this problem, we leverage optimal control to identify a family of amplitude control waveforms that optimally suppress low-frequency dephasing noise and detuning errors, while maintaining the spectral concentration in the amplitude filter essential for spectral estimation. The waveforms found via numerical optimization have surprisingly simple analytic forms, consisting of oscillating sine waves obeying particular amplitude and frequency constraints. In numerically simulated QNS experiments, these waveforms demonstrate superior robustness, enabling accurate estimation of the amplitude noise spectrum in regimes where existing approaches are biased by low-frequency dephasing noise and detuning errors.
A better understanding of the noise causing qubit decoherence is crucial for improving qubit performance. The noise spectrum affecting the qubit may be extracted by measuring dephasing under the application of pulse sequences but requires accurate qubit control and sufficiently long relaxation times, which are not always available. Here, we describe an alternative method to extract the spectrum from correlations of single-shot measurement outcomes of successive free induction decays. This method only requires qubit initialization and readout with a moderate fidelity and also allows independent tuning of both the overall sensitivity and the frequency region over which it is sensitive. Thus, it is possible to maintain a good detection contrast over a very wide frequency range. We discuss using our method for measuring both 1/f noise and the fluctuation spectrum of the nuclear bath of GaAs spin qubits.
We propose a general method to characterize classical stochastic noise causing qubit dephasing through repetitive Ramsey interferometry measurements (RIMs) on the qubit. Compared to filter-function-based spectroscopy, our method with simpler pulse control is less constrained by probe coherence time and can directly detect arbitrary-order correlation functions of quasistatic noise processes. We show that each RIM with a short evolution time and suitably chosen control pulses directly samples the noise field and the nnn-point correlations of the RIM outcomes are proportional to the nnn-point correlation functions of the noise processes. We demonstrate the method numerically for two representative cases: an Ornstein-Uhlenbeck Gaussian process and a non-Gaussian ensemble of two-level fluctuators. While practical constraints such as readout contrast and sampling cost persist, our method offers a direct route to quasistatic classical noise spectroscopy across diverse platforms.