Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2402.04322 · Applied Sciences

Characterization of a Transmon Qubit in a 3D Cavity for Quantum Machine Learning and Photon Counting

Alessandro D’Elia, Boulos Alfakes, Anas Alkhazaleh, Leonardo Banchi, M. Beretta, Stefano Carrazza, F. Chiarello, Daniele Di Gioacchino, Andrea Giachero, Felix Henrich, Alex Stephane Piedjou Komnang, Carlo Ligi, Giovanni Maccarrone, Massimo Macucci, Emanuele Palumbo, Andrea Pasquale, L. Piersanti, Florent Ravaux, A. Rettaroli, Matteo Robbiati, S. Tocci, Claudio D. Gatti

Published Feb 11, 2024• 9 citations
arXivHTMLPDF

Abstract

In this paper, we report the use of a superconducting transmon qubit in a 3D cavity for quantum machine learning and photon counting applications. We first describe the realization and characterization of a transmon qubit coupled to a 3D resonator, providing a detailed description of the simulation framework and of the experimental measurement of important parameters, such as the dispersive shift and the qubit anharmonicity. We then report on a Quantum Machine Learning application implemented on a single-qubit device to fit the u-quark parton distribution function of the proton. In the final section of the manuscript, we present a new microwave photon detection scheme based on two qubits coupled to the same 3D resonator. This could in principle decrease the dark count rate, favoring applications like axion dark matter searches.

DOI
10.3390/app14041478

Related papers

Transmon Qubit Modeling and Characterization for Dark Matter Search

Roberto Moretti, Danilo Labranca, Pietro Campana +21 more

This study presents the design, simulation, and experimental characterization of a superconducting transmon qubit circuit prototype for potential applications in dark matter detection experiments. We describe a planar circuit design featuring two non-interacting transmon qubits, one with fixed frequency and the other flux tunable. Finite-element simulations were employed to extract key Hamiltonian parameters and optimize component geometries. The qubit was fabricated and then characterized at 20 mK, allowing for a comparison between simulated and measured qubit parameters. Good agreement was found for transition frequencies and anharmonicities (within 1% and 10% respectively) while coupling strengths exhibited larger discrepancies (30%). We discuss potential causes for measured coherence times falling below expectations (T1 ∼1-2 μs) and propose strategies for future design improvements. Notably, we demonstrate the application of a hybrid 3D-2D simulation approach for energy participation ratio evaluation, yielding a more accurate estimation of dielectric losses. This work represents an important first step in developing planar Quantum Non-Demolition (QND) single-photon counters for dark matter searches, particularly for axion and dark photon detection schemes.

arXiv:2409.05988•IEEE Transactions on Quantum Engineering•Nov 14, 2025•4 citations

Novel two-qubit microwave photon detector for fundamental physics applications

A. Rettaroli, Leonardo Banchi, Hervè Atsè Corti +8 more

Quantum sensing is a rapidly expanding research field that finds one of its applications in fundamental physics, as the detection of light Dark Matter. Qubit-based superconducting devices have already been successfully applied in detecting few-GHz single photons via Quantum Non-Demolition measurements. The optimization and new design schemes of circuits embedding qubits will yield notable enhancements in sensitivity and suppression of dark count rates in experiments involving high-precision microwave photon detection, particularly in the search for Axions and Dark Photons. The Qub-It collaboration is developing a novel microwave photon detection scheme based on two qubits coupled to the same resonator, both in 2D and 3D formats.

Nuclear Instruments and Methods in Physics Research Section A Accelerators Spectrometers Detectors and Associated Equipment•Oct 30, 2024•3 citations

Design and Simulation of a Transmon Qubit Chip for Axion Detection

Roberto Moretti, Hervè Atsè Corti, Danilo Labranca +54 more

Quantum Sensing is a rapidly expanding research field that finds one of its applications in Fundamental Physics, as the search for Dark Matter. Devices based on superconducting qubits have already been successfully applied in detecting few-GHz single photons via Quantum Non-Demolition measurement (QND). This technique allows us to perform repeatable measurements, bringing remarkable sensitivity improvements and dark count rate suppression in experiments based on high-precision microwave photon detection, such as for Axions and Dark Photons search. In this context, the INFN Qub-IT project goal is to realize an itinerant single-photon counter based on superconducting qubits that will exploit QND for enhancing Axion search experiments. In this study, we present Qub-IT's status towards the realization of its first superconducting qubit device, illustrating design and simulation procedures and the characterization of fabricated Coplanar Waveguide Resonators (CPWs) for readout. We match target qubit parameters and assess a few-percent level agreement between lumped and distributed element simulation models. We reach a maximum internal quality factor of 9.2×105for -92 dBm on-chip readout power.

arXiv:2310.05238•IEEE Transactions on Applied Superconductivity•Jan 19, 2024•8 citations

Quantum-Enhanced Sensing of Axion Dark Matter with a Transmon-Based Single Microwave Photon Counter

C. Braggio, Léo Balembois, R. Di Vora +10 more

We report an axion dark matter search with a haloscope equipped with a microwave photon counter. The haloscope is a tunable high quality factor three-dimensional microwave cavity placed in a magnetic field. The photon counter, operated cyclically, maps an incoming microwave photon onto the state of a superconducting transmon qubit. The measurement protocol continuously monitors the power emitted by the haloscope cavity as well as the dark count background and enables tuning of the cavity frequency to probe different axion masses. With this apparatus, we enhance by a factor of 20 the search speed that can be reached with quantum-limited linear amplifiers and set a new standard for probing the existence of axions with resonant detectors above 5 GHz.

arXiv:2403.02321•Physical Review X•Apr 28, 2025•30 citations

Benchmarking Dark Matter Search using a Parity-Check Protocol with Machine-Learning Optimized Pulses

Yu-Han Chang, Ilya Moskalenko, Marko Kuzmanović +7 more

We report on an improved microwave detection protocol for dark matter candidates such as the axion and the dark photon. We employ a superconducting transmon qubit dispersively coupled to a double-cavity system, enabling quantum non-demolition measurements of the photon occupation in a relatively short-lived storage cavity. To reduce the experimental cycle time and enhance sensitivity for axion and dark-photon searches, we operate this detector in a regime of increased qubit-cavity coupling, resulting in Stark shifts of 4.6 MHz. In this regime, conventional control pulses suffer from strong frequency-detuning sensitivity and photon-number-dependent errors. We address this limitation by implementing frequency-detuning-robust $π/2$ pulses (obtained by machine-learning optimization) that preserve high-fidelity qubit control over a bandwidth of approximately 20 MHz. We experimentally validate this protocol and demonstrate single-photon detection performance comparable to previous implementations, despite significantly reduced qubit coherence times and storage-cavity lifetimes. Using parity-based measurement sequences combined with a Hidden Markov Model (HMM) analysis, we achieve background rates on the order of $\mathcal{O}(20)$ Hz. In the absence of a magnetic field, we derive exclusion limits on the dark photon model for dark matter, reaching a sensitivity to the kinetic mixing angle of $ε_{95\%} \sim 1\times10^{-14}$ at 5.051 GHz. These results establish machine-learning robust control as a key enabler for faster, more scalable microwave quantum sensors for dark-matter searches.

quant-pharXiv:2606.25795•Physical review. D/Physical review. D.•Jun 25, 2026•0 citations

Searching for Dark Matter with a Superconducting Qubit

Akash V. Dixit, Srivatsan Chakram, Kevin T. He +4 more

Detection mechanisms for low mass bosonic dark matter candidates, such as the axion or hidden photon, leverage potential interactions with electromagnetic fields, whereby the dark matter (of unknown mass) on rare occasion converts into a single photon. Current dark matter searches operating at microwave frequencies use a resonant cavity to coherently accumulate the field sourced by the dark matter and a near standard quantum limited (SQL) linear amplifier to read out the cavity signal. To further increase sensitivity to the dark matter signal, sub-SQL detection techniques are required. Here we report the development of a novel microwave photon counting technique and a new exclusion limit on hidden photon dark matter. We operate a superconducting qubit to make repeated quantum nondemolition measurements of cavity photons and apply a hidden Markov model analysis to reduce the noise to 15.7 dB below the quantum limit, with overall detector performance limited by a residual background of real photons. With the present device, we perform a hidden photon search and constrain the kinetic mixing angle to ε≤1.68×10^{-15} in a band around 6.011 GHz (24.86 μeV) with an integration time of 8.33 s. This demonstrated noise reduction technique enables future dark matter searches to be sped up by a factor of 1,300. By coupling a qubit to an arbitrary quantum sensor, more general sub-SQL metrology is possible with the techniques presented in this Letter.

arXiv:2008.12231•Physical Review Letters•Apr 8, 2021•184 citations
In this paper, we report the use of a superconducting transmon qubit in a 3D cavity for quantum machine learning and photon counting applications. We first describe the realization and characterization of a transmon qubit coupled to a 3D resonator, providing a detailed description of the simulation framework and of the experimental measurement of important parameters, such as the dispersive shift and the qubit anharmonicity. We then report on a Quantum Machine Learning application implemented on a single-qubit device to fit the u-quark parton distribution function of the proton. In the final section of the manuscript, we present a new microwave photon detection scheme based on two qubits coupled to the same 3D resonator. This could in principle decrease the dark count rate, favoring applications like axion dark matter searches.
This study presents the design, simulation, and experimental characterization of a superconducting transmon qubit circuit prototype for potential applications in dark matter detection experiments. We describe a planar circuit design featuring two non-interacting transmon qubits, one with fixed frequency and the other flux tunable. Finite-element simulations were employed to extract key Hamiltonian parameters and optimize component geometries. The qubit was fabricated and then characterized at 20 mK, allowing for a comparison between simulated and measured qubit parameters. Good agreement was found for transition frequencies and anharmonicities (within 1% and 10% respectively) while coupling strengths exhibited larger discrepancies (30%). We discuss potential causes for measured coherence times falling below expectations (T1 ∼1-2 μs) and propose strategies for future design improvements. Notably, we demonstrate the application of a hybrid 3D-2D simulation approach for energy participation ratio evaluation, yielding a more accurate estimation of dielectric losses. This work represents an important first step in developing planar Quantum Non-Demolition (QND) single-photon counters for dark matter searches, particularly for axion and dark photon detection schemes.
Quantum sensing is a rapidly expanding research field that finds one of its applications in fundamental physics, as the detection of light Dark Matter. Qubit-based superconducting devices have already been successfully applied in detecting few-GHz single photons via Quantum Non-Demolition measurements. The optimization and new design schemes of circuits embedding qubits will yield notable enhancements in sensitivity and suppression of dark count rates in experiments involving high-precision microwave photon detection, particularly in the search for Axions and Dark Photons. The Qub-It collaboration is developing a novel microwave photon detection scheme based on two qubits coupled to the same resonator, both in 2D and 3D formats.
Quantum Sensing is a rapidly expanding research field that finds one of its applications in Fundamental Physics, as the search for Dark Matter. Devices based on superconducting qubits have already been successfully applied in detecting few-GHz single photons via Quantum Non-Demolition measurement (QND). This technique allows us to perform repeatable measurements, bringing remarkable sensitivity improvements and dark count rate suppression in experiments based on high-precision microwave photon detection, such as for Axions and Dark Photons search. In this context, the INFN Qub-IT project goal is to realize an itinerant single-photon counter based on superconducting qubits that will exploit QND for enhancing Axion search experiments. In this study, we present Qub-IT's status towards the realization of its first superconducting qubit device, illustrating design and simulation procedures and the characterization of fabricated Coplanar Waveguide Resonators (CPWs) for readout. We match target qubit parameters and assess a few-percent level agreement between lumped and distributed element simulation models. We reach a maximum internal quality factor of 9.2×105for -92 dBm on-chip readout power.
We report an axion dark matter search with a haloscope equipped with a microwave photon counter. The haloscope is a tunable high quality factor three-dimensional microwave cavity placed in a magnetic field. The photon counter, operated cyclically, maps an incoming microwave photon onto the state of a superconducting transmon qubit. The measurement protocol continuously monitors the power emitted by the haloscope cavity as well as the dark count background and enables tuning of the cavity frequency to probe different axion masses. With this apparatus, we enhance by a factor of 20 the search speed that can be reached with quantum-limited linear amplifiers and set a new standard for probing the existence of axions with resonant detectors above 5 GHz.
We report on an improved microwave detection protocol for dark matter candidates such as the axion and the dark photon. We employ a superconducting transmon qubit dispersively coupled to a double-cavity system, enabling quantum non-demolition measurements of the photon occupation in a relatively short-lived storage cavity. To reduce the experimental cycle time and enhance sensitivity for axion and dark-photon searches, we operate this detector in a regime of increased qubit-cavity coupling, resulting in Stark shifts of 4.6 MHz. In this regime, conventional control pulses suffer from strong frequency-detuning sensitivity and photon-number-dependent errors. We address this limitation by implementing frequency-detuning-robust π/2π/2π/2 pulses (obtained by machine-learning optimization) that preserve high-fidelity qubit control over a bandwidth of approximately 20 MHz. We experimentally validate this protocol and demonstrate single-photon detection performance comparable to previous implementations, despite significantly reduced qubit coherence times and storage-cavity lifetimes. Using parity-based measurement sequences combined with a Hidden Markov Model (HMM) analysis, we achieve background rates on the order of O(20)\mathcal{O}(20)O(20) Hz. In the absence of a magnetic field, we derive exclusion limits on the dark photon model for dark matter, reaching a sensitivity to the kinetic mixing angle of ε95%∼1×10−14ε_{95\%} \sim 1\times10^{-14}ε95%​∼1×10−14 at 5.051 GHz. These results establish machine-learning robust control as a key enabler for faster, more scalable microwave quantum sensors for dark-matter searches.
Detection mechanisms for low mass bosonic dark matter candidates, such as the axion or hidden photon, leverage potential interactions with electromagnetic fields, whereby the dark matter (of unknown mass) on rare occasion converts into a single photon. Current dark matter searches operating at microwave frequencies use a resonant cavity to coherently accumulate the field sourced by the dark matter and a near standard quantum limited (SQL) linear amplifier to read out the cavity signal. To further increase sensitivity to the dark matter signal, sub-SQL detection techniques are required. Here we report the development of a novel microwave photon counting technique and a new exclusion limit on hidden photon dark matter. We operate a superconducting qubit to make repeated quantum nondemolition measurements of cavity photons and apply a hidden Markov model analysis to reduce the noise to 15.7 dB below the quantum limit, with overall detector performance limited by a residual background of real photons. With the present device, we perform a hidden photon search and constrain the kinetic mixing angle to ε≤1.68×10^{-15} in a band around 6.011 GHz (24.86 μeV) with an integration time of 8.33 s. This demonstrated noise reduction technique enables future dark matter searches to be sped up by a factor of 1,300. By coupling a qubit to an arbitrary quantum sensor, more general sub-SQL metrology is possible with the techniques presented in this Letter.