In practical sensing tasks, noise is usually regarded as an obstacle that degrades the sensitivity. Fortunately, stochastic resonance can counterintuitively harness noise to notably enhance the output signal-to-noise ratio in a nonlinear system. Although stochastic resonance has been extensively studied in various disciplines, its potential in realistic sensing tasks remains largely unexplored. Here, we propose and demonstrate a noise-enhanced microwave sensor using a thermal ensemble of interacting Rydberg atoms. Using the strong nonlinearity present in the Rydberg ensembles and leveraging stochastic noises in the system, we demonstrate the stochastic resonance driven by a weak microwave signal (from several microvolts per centimeter to millivolts per centimeter). A substantial enhancement in the detection is achieved, with a sensitivity surpassing that of a heterodyne atomic sensor by 6.6 decibels. Our results offer a promising platform for investigating stochastic resonance in practical sensing scenarios.
In practical sensing tasks, noise is usually regarded as an obstacle that degrades the sensitivity. Fortunately, stochastic resonance can counterintuitively harness noise to notably enhance the output signal-to-noise ratio in a nonlinear system. Although stochastic resonance has been extensively studied in various disciplines, its potential in realistic sensing tasks remains largely unexplored. Here, we propose and demonstrate a noise-enhanced microwave sensor using a thermal ensemble of interacting Rydberg atoms. Using the strong nonlinearity present in the Rydberg ensembles and leveraging stochastic noises in the system, we demonstrate the stochastic resonance driven by a weak microwave signal (from several microvolts per centimeter to millivolts per centimeter). A substantial enhancement in the detection is achieved, with a sensitivity surpassing that of a heterodyne atomic sensor by 6.6 decibels. Our results offer a promising platform for investigating stochastic resonance in practical sensing scenarios.
We demonstrate an atomic rf receiver and spectrum analyzer based on thermal Rydberg atoms coupled to a planar microwave waveguide. We use an off-resonant rf heterodyne technique to achieve continuous operation for carrier frequencies ranging from dc to 20 GHz. The system achieves an intrinsic sensitivity of up to $\ensuremath{-}120(2)$, dc coupling, 4-MHz instantaneous bandwidth, and over 80 dB of linear dynamic range. By connecting through a low-noise preamplifier, we demonstrate high-performance spectrum analysis with peak sensitivity of better than $\ensuremath{-}145\phantom{\rule{0.2em}{0ex}}\mathrm{dBm/Hz}$. Attaching a standard rabbit-ears antenna, the spectrum analyzer detects weak ambient signals including FM radio, AM radio, WiFi, and bluetooth. We also demonstrate waveguide-readout of the thermal Rydberg ensemble by nondestructively probing waveguide-atom interactions. The system opens the door for small, room-temperature, ensemble-based Rydberg sensors that surpass the sensitivity, bandwidth, and precision limitations of standard rf sensors, receivers, and analyzers.
In recent years, the Rydberg-atom sensor has attracted significant attention due to its high sensitivity, wide dynamic range, and miniaturization capabilities. However, noise from laser power fluctuations, frequency drift, and environment is introduced alongside the intrinsic quantum noise of Rydberg atoms, significantly degrading system performance for microwave sensing. This study tries to reduce the noise impact by combining the Rydberg-atom sensor with the convolutional neural network (CNN)-transformer model. The CNN module captures local temporal features of the signals, while the transformer module extracts global correlations within these features. We apply it to the following classification tasks of atomic microwave sensing: multifrequency microwave recognition, broadband spectrum monitoring, and automatic modulation recognition. We demonstrate that the CNN-transformer model achieves high accuracy across the three tasks and can effectively reduce the noise impact, which holds significant potential for applications in radar detection and wireless communication.
High-sensitivity measurements of the microwave electric field are important in applications of communication and metrology. The sensitivity of traditional Rydberg superheterodyne receivers in free space is effectively determined by the signal-to-noise ratio (SNR), which is often considered equivalent to sensitivity in practical sensing applications. In this work, we demonstrate a cavity-enhanced receiver, where an optical cavity significantly amplifies the interaction between the probe light and cesium atoms, which substantially improves the signal-to-noise ratio via enhancing the expansion coefficient κ . Here, κ is the edge slope of the single peak obtained by fitting the double-peak EIT-AT spectrum, characterizing the response of the probe light to the frequency detuning of the coupling laser. The sensitivity is thus boosted by a factor of approximately 19 dB. This study highlights the pivotal role of optical cavities in advancing Rydberg-based detection systems, offering a promising approach for high-sensitivity microwave electric field measurements.
High-sensitivity amplitude and frequency detection of microwave electric fields is of significant importance in various fields, including communications, microwave quantum technology, aerospace, medicine, and meteorology. Rydberg atom-based sensors promise traceable standards and high sensitivity for detecting weak electric fields and enhancing sensing sensitivity, mainly by using superheterodyne technology and resonant structures. Detecting high-frequency (HF) band fields with high sensitivity using Rydberg atom sensors is a significant challenge due to the requirement of exciting atoms to extremely high energy states for resonant detection. We demonstrate the off-resonant Rydberg atomic superheterodyne architecture with additional resonators for greatly enhancing the sensing sensitivity to HF band fields. In this approach, we propose a miniaturized square spiral resonator with an electrical size of$0.011~\lambda $at 15.54 MHz. To reduce the electric-field-screening effect of the adsorption of alkali metal atoms, we use a monocrystalline sapphire cesium (Cs) vapor cell. By utilizing the off-resonant alternating current (ac) Stark effect, the initial sensitivity of the Rydberg atom sensor without the resonator is measured to be10.39μV/cmHzat room temperature. With the addition of the miniaturized square spiral resonator, the sensitivity significantly improved to2.60nV/cmHz, which has been inaccessible so far with atomic sensors. Here, we provide an enhancement of 72 dB, which is three orders of magnitude improvement in sensitivity than when the resonator is not used. This enhancement resonator extends Rydberg atomic high-sensitivity sensing to the HF band and shows great potential, especially in shortwave radio reception.
Abstract Developing microwave electric field sensing based on Rydberg atoms has received significant attention due to its unique advantages. However, achieving effective coupling between Rydberg atoms and the microwave electric field in the sensing process is a challenging problem that greatly impacts the sensitivity. To address this, we propose using a microwave resonant cavity to enhance the effective coupling between the Rydberg atoms and the microwave electric field. In our experiment, Rydberg atoms are prepared via a three-photon excitation scheme, and the electric fields are measured without and with a microwave cavity in which the vapor cell is placed inside, respectively. As a result, we achieved an 18 dB enhancement of power sensitivity by adding the cavity, which is an effective enhancement in electric field pulse signal detection. This experimental testing provides a promising direction for enhancing the sensitivity of Rydberg atomic electric field sensors and paves the way for their application in precision electric field measurements.
Broadband Rydberg Atomic Microwave Sensing with 44.6MHz Instantaneous Bandwidth
Rydberg atoms have become a promising novel type of microwave sensor due to their excellent physical properties -- broad frequency coverage and large electric dipole moments. High sensitivity and broad instantaneous bandwidth are two indispensable requirements for deployable Rydberg microwave sensors. However, enabling broadband operation while retaining high sensitivity has been a longstanding barrier limiting their applications. We propose and experimentally demonstrate a Rydberg microwave sensor whose instantaneous bandwidth is significantly enhanced via an auxiliary microwave field. By finely modulating the Rydberg energy levels with this field, we broaden the bandwidth substantially while retaining the sensor's inherent high sensitivity. An instantaneous bandwidth of 44.6MHz ($\pm22.3\,MHz)withasensitivityof225.7\,nV\,cm^{-1}\,Hz^{-1/2}$ is realized in a thermal 87Rb vapor with the local microwave frequency of 16.03GHz. Our work delivers concurrent broad instantaneous bandwidth and high sensitivity for Rydberg microwave sensors, paving a technically viable path for their practical deployment in broadband microwave metrology, radar, and wireless communication.