Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2401.10455 · npj Quantum Information

Microwave single-photon detection using a hybrid spin-optomechanical quantum interface

Pratyush Anand, Ethan G. Arnault, Matthew E. Trusheim, Kurt A. Jacobs, Dirk Englund

Published Oct 21, 2025• 2 citations
arXivHTMLPDF

Abstract

Semiconductor single-photon detectors cannot be straightforwardly adapted for the microwave regime, primarily because microwave photons carry far less energy and thus require cryogenic temperatures and specialized architectures. Here, we propose a hybrid spin-optomechanical interface to detect single microwave photons where the microwave photons are coupled to a phononic resonator via piezoelectric actuation. This phononic cavity also acts as a photonic cavity with either a single embedded Silicon-Vacancy (SiV−) center in diamond or an ensemble of these centers, bridging optical single-photon detection protocols into the microwave domain. We model the detection process as a communication channel whose capacity is quantified by the mutual information I(A; B) between the true photon occupancy (A) and the detector outcome (B). Depending on experimentally achievable parameters, simulations predict I(A; B) in the range $$0.57\,\ln (2)$$ to $$0.67\,\ln (2)$$ , corresponding to true-positive (detection) probabilities above 90% and false-positive (dark count) probabilities below 10% per detection interval. These results suggest a viable path to low-noise, high-efficiency single-photon detection at microwave frequencies.

DOI
10.1038/s41534-025-01115-9

Related papers

Quantum microwave-optical interface with nitrogen-vacancy centers in diamond

Bo Li, Fuli Li, Yuan Zhou +2 more

We propose an efficient scheme for a coherent quantum interface between microwave and optical photons using nitrogen-vacancy (NV) centers in diamond. In this setup, an NV center ensemble is simultaneously coupled to an optical and a microwave cavity. We show that, by using the collective spin excitation modes as an intermediary, quantum states can be transferred between the microwave cavity and the optical cavity through either a double-swap scheme or a dark-state protocol. This hybrid quantum interface may provide interesting applications in single microwave photon detections or quantum information processing.

arXiv:1709.04852•Physical Review A•Sep 29, 2017•51 citations

Detecting Single Microwave Photons with NV Centers in Diamond

Olivia Woodman, Abdolreza Pasharavesh, Christopher M. Wilson +1 more

We propose a scheme for detecting single microwave photons using dipole-induced transparency (DIT) in an optical cavity resonantly coupled to a spin-selective transition of a negatively charged nitrogen-vacancy (NV−) defect in diamond crystal lattices. In this scheme, the microwave photons control the interaction of the optical cavity with the NV− center by addressing the spin state of the defect. The spin, in turn, is measured with high fidelity by counting the number of reflected photons when the cavity is probed by resonant laser light. To evaluate the performance of the proposed scheme, we derive the governing master equation and solve it through both direct integration and the Monte Carlo approach. Using these numerical simulations, we then investigate the effects of different parameters on the detection performance and find their corresponding optimized values. Our results indicate that detection efficiencies approaching 90% and fidelities exceeding 90% could be achieved when using realistic optical and microwave cavity parameters.

Materials•Apr 21, 2023•3 citations

Tunable high-efficiency microwave photon detector based on a double quantum dot coupled to a superconducting high-impedance cavity

Fabian Oppliger, Wonjin Jang, Aldo Tarascio +6 more

High-efficiency single-photon detection in the microwave domain is a key enabling technology for various quantum applications. However, the extremely low energy of microwave photons presents a fundamental challenge, preventing direct photon-to-charge conversion as achieved in optical systems using semiconductors. Here, we demonstrate continuous microwave photon detection with an efficiency approaching 70% in the single-photon regime. We use a hybrid system comprising a gate-defined double quantum dot (DQD) charge qubit in a gallium arsenide/aluminum gallium arsenide heterostructure, coupled to a high-impedance Josephson junction array cavity. We systematically optimize the hybrid architecture to maximize the detection efficiency by leveraging strong charge-photon coupling, tunable DQD tunnel rates, and the frequency tunability of both subsystems. The system efficiency is characterized over a frequency range of 3 to 5.2 gigahertz. Our results establish semiconductor-based cavity-quantum electrodynamics architectures as a scalable and versatile platform for efficient microwave photon detection, opening promising avenues for quantum microwave optics and quantum information technologies.

arXiv:2506.19828•Science Advances•Apr 3, 2026•4 citations

Tunable high-efficiency microwave photon detector based on a double quantum dot coupled to a superconducting high-impedance cavity

Fabian Oppliger, Wonjin Jang, Aldo Tarascio +6 more

High-efficiency single-photon detection in the microwave domain is a key enabling technology for various quantum applications. However, the extremely low energy of microwave photons presents a fundamental challenge, preventing direct photon-to-charge conversion as achieved in optical systems using semiconductors. Here, we demonstrate continuous microwave photon detection with an efficiency approaching 70% in the single-photon regime. We use a hybrid system comprising a gate-defined double quantum dot (DQD) charge qubit in a gallium arsenide/aluminum gallium arsenide heterostructure, coupled to a high-impedance Josephson junction array cavity. We systematically optimize the hybrid architecture to maximize the detection efficiency by leveraging strong charge-photon coupling, tunable DQD tunnel rates, and the frequency tunability of both subsystems. The system efficiency is characterized over a frequency range of 3 to 5.2 gigahertz. Our results establish semiconductor-based cavity-quantum electrodynamics architectures as a scalable and versatile platform for efficient microwave photon detection, opening promising avenues for quantum microwave optics and quantum information technologies.

•Apr 1, 2026•0 citations

Single microwave-photon detector using an artificial Λ-type three-level system

K. Inomata, Zhirong Lin, Kazuki Koshino +4 more

Single-photon detection is a requisite technique in quantum-optics experiments in both the optical and the microwave domains. However, the energy of microwave quanta are four to five orders of magnitude less than their optical counterpart, making the efficient detection of single microwave photons extremely challenging. Here we demonstrate the detection of a single microwave photon propagating through a waveguide. The detector is implemented with an impedance-matched artificial Λ system comprising the dressed states of a driven superconducting qubit coupled to a microwave resonator. Each signal photon deterministically induces a Raman transition in the Λ system and excites the qubit. The subsequent dispersive readout of the qubit produces a discrete 'click'. We attain a high single-photon-detection efficiency of 0.66±0.06 with a low dark-count probability of 0.014±0.001 and a reset time of ∼400 ns. This detector can be exploited for various applications in quantum sensing, quantum communication and quantum information processing.

arXiv:1601.05513•Nature Communications•Jul 25, 2016•203 citations

Cavity piezo-mechanics for superconducting-nanophotonic quantum interface

Xu Han, Wei Fu, Changchun Zhong +8 more

Abstract Hybrid quantum systems are essential for the realization of distributed quantum networks. In particular, piezo-mechanics operating at typical superconducting qubit frequencies features low thermal excitations, and offers an appealing platform to bridge superconducting quantum processors and optical telecommunication channels. However, integrating superconducting and optomechanical elements at cryogenic temperatures with sufficiently strong interactions remains a tremendous challenge. Here, we report an integrated superconducting cavity piezo-optomechanical platform where 10 GHz phonons are resonantly coupled with photons in a superconducting cavity and a nanophotonic cavity at the same time. Taking advantage of the large piezo-mechanical cooperativity (Cem ~7) and the enhanced optomechanical coupling boosted by a pulsed optical pump, we demonstrate coherent interactions at cryogenic temperatures via the observation of efficient microwave-optical photon conversion. This hybrid interface makes a substantial step towards quantum communication at large scale, as well as novel explorations in microwave-optical photon entanglement and quantum sensing mediated by gigahertz phonons.

arXiv:2001.09483•Nature Communications•Jun 26, 2020•122 citations
Semiconductor single-photon detectors cannot be straightforwardly adapted for the microwave regime, primarily because microwave photons carry far less energy and thus require cryogenic temperatures and specialized architectures. Here, we propose a hybrid spin-optomechanical interface to detect single microwave photons where the microwave photons are coupled to a phononic resonator via piezoelectric actuation. This phononic cavity also acts as a photonic cavity with either a single embedded Silicon-Vacancy (SiV−) center in diamond or an ensemble of these centers, bridging optical single-photon detection protocols into the microwave domain. We model the detection process as a communication channel whose capacity is quantified by the mutual information I(A; B) between the true photon occupancy (A) and the detector outcome (B). Depending on experimentally achievable parameters, simulations predict I(A; B) in the range 0.57 ln⁡(2)0.57\,\ln (2)0.57ln(2) to 0.67 ln⁡(2)0.67\,\ln (2)0.67ln(2) , corresponding to true-positive (detection) probabilities above 90% and false-positive (dark count) probabilities below 10% per detection interval. These results suggest a viable path to low-noise, high-efficiency single-photon detection at microwave frequencies.
We propose an efficient scheme for a coherent quantum interface between microwave and optical photons using nitrogen-vacancy (NV) centers in diamond. In this setup, an NV center ensemble is simultaneously coupled to an optical and a microwave cavity. We show that, by using the collective spin excitation modes as an intermediary, quantum states can be transferred between the microwave cavity and the optical cavity through either a double-swap scheme or a dark-state protocol. This hybrid quantum interface may provide interesting applications in single microwave photon detections or quantum information processing.
We propose a scheme for detecting single microwave photons using dipole-induced transparency (DIT) in an optical cavity resonantly coupled to a spin-selective transition of a negatively charged nitrogen-vacancy (NV−) defect in diamond crystal lattices. In this scheme, the microwave photons control the interaction of the optical cavity with the NV− center by addressing the spin state of the defect. The spin, in turn, is measured with high fidelity by counting the number of reflected photons when the cavity is probed by resonant laser light. To evaluate the performance of the proposed scheme, we derive the governing master equation and solve it through both direct integration and the Monte Carlo approach. Using these numerical simulations, we then investigate the effects of different parameters on the detection performance and find their corresponding optimized values. Our results indicate that detection efficiencies approaching 90% and fidelities exceeding 90% could be achieved when using realistic optical and microwave cavity parameters.
High-efficiency single-photon detection in the microwave domain is a key enabling technology for various quantum applications. However, the extremely low energy of microwave photons presents a fundamental challenge, preventing direct photon-to-charge conversion as achieved in optical systems using semiconductors. Here, we demonstrate continuous microwave photon detection with an efficiency approaching 70% in the single-photon regime. We use a hybrid system comprising a gate-defined double quantum dot (DQD) charge qubit in a gallium arsenide/aluminum gallium arsenide heterostructure, coupled to a high-impedance Josephson junction array cavity. We systematically optimize the hybrid architecture to maximize the detection efficiency by leveraging strong charge-photon coupling, tunable DQD tunnel rates, and the frequency tunability of both subsystems. The system efficiency is characterized over a frequency range of 3 to 5.2 gigahertz. Our results establish semiconductor-based cavity-quantum electrodynamics architectures as a scalable and versatile platform for efficient microwave photon detection, opening promising avenues for quantum microwave optics and quantum information technologies.
High-efficiency single-photon detection in the microwave domain is a key enabling technology for various quantum applications. However, the extremely low energy of microwave photons presents a fundamental challenge, preventing direct photon-to-charge conversion as achieved in optical systems using semiconductors. Here, we demonstrate continuous microwave photon detection with an efficiency approaching 70% in the single-photon regime. We use a hybrid system comprising a gate-defined double quantum dot (DQD) charge qubit in a gallium arsenide/aluminum gallium arsenide heterostructure, coupled to a high-impedance Josephson junction array cavity. We systematically optimize the hybrid architecture to maximize the detection efficiency by leveraging strong charge-photon coupling, tunable DQD tunnel rates, and the frequency tunability of both subsystems. The system efficiency is characterized over a frequency range of 3 to 5.2 gigahertz. Our results establish semiconductor-based cavity-quantum electrodynamics architectures as a scalable and versatile platform for efficient microwave photon detection, opening promising avenues for quantum microwave optics and quantum information technologies.
Single-photon detection is a requisite technique in quantum-optics experiments in both the optical and the microwave domains. However, the energy of microwave quanta are four to five orders of magnitude less than their optical counterpart, making the efficient detection of single microwave photons extremely challenging. Here we demonstrate the detection of a single microwave photon propagating through a waveguide. The detector is implemented with an impedance-matched artificial Λ system comprising the dressed states of a driven superconducting qubit coupled to a microwave resonator. Each signal photon deterministically induces a Raman transition in the Λ system and excites the qubit. The subsequent dispersive readout of the qubit produces a discrete 'click'. We attain a high single-photon-detection efficiency of 0.66±0.06 with a low dark-count probability of 0.014±0.001 and a reset time of ∼400 ns. This detector can be exploited for various applications in quantum sensing, quantum communication and quantum information processing.
Abstract Hybrid quantum systems are essential for the realization of distributed quantum networks. In particular, piezo-mechanics operating at typical superconducting qubit frequencies features low thermal excitations, and offers an appealing platform to bridge superconducting quantum processors and optical telecommunication channels. However, integrating superconducting and optomechanical elements at cryogenic temperatures with sufficiently strong interactions remains a tremendous challenge. Here, we report an integrated superconducting cavity piezo-optomechanical platform where 10 GHz phonons are resonantly coupled with photons in a superconducting cavity and a nanophotonic cavity at the same time. Taking advantage of the large piezo-mechanical cooperativity (Cem ~7) and the enhanced optomechanical coupling boosted by a pulsed optical pump, we demonstrate coherent interactions at cryogenic temperatures via the observation of efficient microwave-optical photon conversion. This hybrid interface makes a substantial step towards quantum communication at large scale, as well as novel explorations in microwave-optical photon entanglement and quantum sensing mediated by gigahertz phonons.