Microwave signal processing using an analog quantum reservoir computer
Alen Senanian, Sridhar Prabhu, Vladimir Kremenetski, Saswata Roy, Yingkang Cao, Jeremy B. Kline, Tatsuhiro Onodera, Logan G. Wright, Xiaodi Wu, Valla Fatemi, Peter L. McMahon
Quantum reservoir computing (QRC) has been proposed as a paradigm for performing machine learning with quantum processors where the training takes place in the classical domain, avoiding the issue of barren plateaus in parameterized-circuit quantum neural networks. It is natural to consider using a quantum processor based on microwave superconducting circuits to classify microwave signals that are analog—continuous in time. However, while there have been theoretical proposals of analog QRC, to date QRC has been implemented using the circuit model—imposing a discretization of the incoming signal in time. In this paper we show how a quantum superconducting circuit comprising an oscillator coupled to a qubit can be used as an analog quantum reservoir for a variety of classification tasks, achieving high accuracy on all of them. Our work demonstrates processing of ultra-low-power microwave signals within our superconducting circuit, a step towards achieving a quantum sensing-computational advantage on impinging microwave signals. Quantum reservoir computing might in principle give advantages in solving signal classification tasks, but current implementations usually incur in the digitalization bottleneck. Here, the authors demonstrate an implementation dealing directly with the analogue MW signals.
Quantum reservoir computing (QRC) has been proposed as a paradigm for performing machine learning with quantum processors where the training takes place in the classical domain, avoiding the issue of barren plateaus in parameterized-circuit quantum neural networks. It is natural to consider using a quantum processor based on microwave superconducting circuits to classify microwave signals that are analog—continuous in time. However, while there have been theoretical proposals of analog QRC, to date QRC has been implemented using the circuit model—imposing a discretization of the incoming signal in time. In this paper we show how a quantum superconducting circuit comprising an oscillator coupled to a qubit can be used as an analog quantum reservoir for a variety of classification tasks, achieving high accuracy on all of them. Our work demonstrates processing of ultra-low-power microwave signals within our superconducting circuit, a step towards achieving a quantum sensing-computational advantage on impinging microwave signals. Quantum reservoir computing might in principle give advantages in solving signal classification tasks, but current implementations usually incur in the digitalization bottleneck. Here, the authors demonstrate an implementation dealing directly with the analogue MW signals.
Quantum reservoir computing (QRC) uses the dynamics of a fixed or weakly tuned quantum system to transform temporal and sequential inputs into measured features, while training is typically confined to a classical readout. This separation reduces reliance on repeated quantum parameter updates and avoids the barren plateaus associated with variational circuit training. Its computational power is often attributed to the exponentially large Hilbert space of the quantum system. However, the memory, nonlinearity, and expressivity that determine what a reservoir can actually compute depend jointly on the input encoding, quantum evolution, observables, measurement, and readout, not on Hilbert space dimension alone. On hardware, these capabilities are further constrained by finite sampling, hardware noise, measurement backaction, and the cost of estimating observables, so a large state space alone does not guarantee useful computation. In this survey, we develop a common system model that connects these components and use it to organize QRC foundations, computational properties, reservoir architectures, operating protocols, and physical implementations. We examine spin, photonic, superconducting, bosonic, neutral atom, and other analog platforms, together with applications, software and high performance computing support, benchmarking, and reproducibility. The analysis distinguishes hardware demonstrations from simulations and identifies the assumptions and resources that govern comparisons across implementations. Current results do not establish a broad quantum advantage over well matched classical reservoirs. We therefore specify the resource accounting, benchmark standards, and theoretical criteria needed to evaluate claims of quantum advantage.
This paper investigates the application of quantum reservoir computing (QRC) to time series prediction. Classical reservoir computing (RC) utilizes a complex, high-dimensional system – the 'reservoir' – as a non-linear feature extractor, followed by a linear regression model for prediction. QRC extends this concept by leveraging the inherent dynamics of a quantum system as the reservoir. We hypothesize that quantum systems, due to their superposition and entanglement properties, can provide richer and more complex dynamics than classical reservoirs, potentially leading to improved prediction accuracy. This work outlines the theoretical framework for QRC, detailing the setup of a suitable quantum reservoir (e.g., a superconducting qubit array), the measurement process, and the training strategy involving a classical machine learning model. We demonstrate a conceptual approach, focusing on the potential advantages and challenges of employing quantum systems for this task. The core claim is that QRC can achieve superior time series prediction accuracy compared to classical RC methods. Key elements explored include the input signal's influence on the quantum reservoir, the selection of appropriate measurement schemes, and the choice of classical learning algorithms. The paper concludes with a discussion of future research directions and the potential impact of QRC on various time series prediction applications.
We analyze numerically the performance of Quantum Reservoir Computing (QRC) for statistical and financial problems. We use a reservoir composed of two superconducting islands coupled via their charge degrees of freedom. The key non-linear elements that provide the reservoir with rich and complex dynamics are the Josephson junctions that connect each island to the ground. We show that QRC implemented in this circuit can accurately classify complex probability distributions, including those with heavy tails, and identify regimes in correlated time series, such as periods of high volatility generated by standard econometric models. We find QRC to outperform some of the best classical methods when the amount of information is limited. This demonstrates its potential to be a noise-resilient quantum learning approach capable of tackling real-world problems within currently available superconducting platforms. We further discuss how to improve our QRC algorithm in real superconducting hardware to benefit from a much larger Hilbert space.
Quantum computational sensing (QCS) combines quantum sensing with quantum computing to extract task-relevant information from the physical world. QCS can in principle achieve an accuracy advantage for specific tasks versus the alternative of raw-signal estimation using conventional quantum sensing followed by task-specific classical postprocessing. Here we report the experimental demonstration of quantum computational displacement sensing (QCDS) with a superconducting circuit comprising a qubit coupled to an oscillator. We consider binary classification sensing tasks, where the goal is to predict the class label of a single complex-valued displacement sensed once by the oscillator. Rather than estimating the displacement, our computational-sensing protocol -- using parameterized quantum circuits before and after sensing -- attempts to determine the binary class label using quantum processing and map it onto the ground or excited state of the qubit. A single measurement of the qubit directly outputs the prediction. We implemented circuits with up to 24 entangling gates and 38 free parameters, which were trained in silico. We show that increasing the circuit depth systematically improves expressivity and classification accuracy. We experimentally obtained an accuracy advantage over a suite of protocols that first use conventional quantum sensing to estimate the displacement before using classical postprocessing to perform prediction. For certain tasks, our protocol achieves a 15-percentage-points higher classification accuracy than most conventional approaches considered. Our results establish the feasibility of quantum computational sensing with noisy superconducting hardware and illustrate how integrating quantum computation with quantum sensing can enhance performance when the goal is to estimate a property or function of a signal rather than to estimate the signal.
Efficient quantum state measurement is important for maximizing the extracted information from a quantum system.For multiqubit quantum processors, in particular, the development of a scalable architecture for rapid and high-fidelity readout remains a critical unresolved problem.Here we propose reservoir computing as a resource-efficient solution to quantum measurement of superconducting multiqubit systems.We consider a small network of Josephson parametric oscillators, which can be implemented with minimal device overhead and in the same platform as the measured quantum system.We theoretically analyze the operation of such a device as a reservoir computer to classify stochastic timedependent signals subject to quantum statistical features.We apply this reservoir computer to the task of multinomial classification of measurement trajectories from joint multiqubit readout.For a 2-qubit dispersive measurement under realistic conditions we demonstrate a classification fidelity reliably exceeding that of an optimal linear filter using only 2-5 reservoir nodes, while simultaneously requiring far less calibration data-as little as a few shots per state.We understand this remarkable performance through an analysis of the network dynamics and develop an intuitive picture of reservoir processing generally.Finally, we demonstrate how to operate this device to perform 2-qubit state tomography and continuous parity monitoring with equal effectiveness and ease of calibration.This reservoir processor avoids computationally intensive training common to other machine learning frameworks and can be implemented as an integrated cryogenic superconducting device for low-latency processing of quantum signals on the computational edge.
Reservoir computing is a powerful machine learning paradigm for online time series processing. It has reached state-of-the-art performance in tasks such as chaotic time series prediction and continuous speech recognition thanks to its unique combination of high computational power and low training cost which sets it aside from alternatives such as traditionally trained recurrent neural networks, and furthermore is amenable to implementations in dedicated hardware, potentially leading to extremely compact and efficient reservoir computers. Recently the use of random quantum systems has been proposed, leveraging the complexity of quantum dynamics for classical time series processing. Extracting the output from a quantum system without disturbing its state too much is problematic however, and can be expected to become a bottleneck in such approaches. Here we propose a reservoir computing inspired approach to online processing of time series consisting of quantum information, sidestepping the measurement problem. We illustrate its power by generalizing two paradigmatic benchmark tasks from classical reservoir computing to quantum information and introducing a task without a classical analogue where a random system is trained to both create and distribute entanglement between systems that never directly interact. Finally, we discuss partial generalizations where only the input or only the output time series is quantum.