Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2312.13668 · Physical review. B./Physical review. B

Finite-temperature minimally entangled typical thermal states impurity solver

Xiaodong Cao, Edwin Miles Stoudenmire, Olivier Parcollet

Published Jun 7, 2024• 2 citations
arXivHTMLPDF

Abstract

We present a minimally entangled typical thermal state quantum impurity solver for general multiorbital systems at finite temperatures. We introduce an improved estimator for the single-particle Green's function that strongly reduces the large fluctuations at long imaginary time and low temperature, which were a severe limitation of the original algorithm. In combination with the fork tensor product states Ansatz, we obtain a dynamical mean field theory (DMFT) quantum impurity solver, which we benchmark for single and three-band models down to low temperatures, including the effect of spin-orbit coupling in a realistic DMFT computation for the Hund's metal ${\mathrm{Sr}}_{2}{\mathrm{RuO}}_{4}$ down to low temperatures.

DOI
10.1103/physrevb.109.245113

Related papers

Minimally entangled typical thermal state algorithms for finite temperature Matsubara Green functions

Daniel Bauernfeind, Xiaodong Cao, Edwin Miles Stoudenmire +1 more

We extend finite temperature tensor network methods to compute Matsubara imaginary time correlation functions, building on the minimally entangled typical thermal states (METTS) and purification algorithms. While imaginary time correlation functions are straightforward to formulate with these methods, care is needed to avoid convergence issues that would result from naive estimators. As a benchmark, we study the single-band Anderson impurity model, even though the algorithm is quite general and applies to lattice models. The special structure of the impurity model benchmark system and our choice of basis enable techniques such as the reuse of high-probability METTS for increasing algorithm efficiency. The results are competitive with state-of-the-art continuous-time Monte Carlo. We discuss the behavior of computation time and error as a function of the number of purified sites in the Hamiltonian.

arXiv:2107.13941•Physical review. B./Physical review. B•May 6, 2022•3 citations

Tree tensor-network real-time multiorbital impurity solver: Spin-orbit coupling and correlation functions in Sr2RuO4

Xiaodong Cao, Yi Lu, P. Hansmann +1 more

We present a tree tensor-network impurity solver suited for general multiorbital systems. The network is constructed to efficiently capture the entanglement structure and symmetry of an impurity problem. The solver works directly on the real-time/frequency axis and generates spectral functions with energy-independent resolution of the order of one percent of the correlated bandwidth. Combined with an optimized representation of the impurity bath, it efficiently solves self-consistent dynamical mean-field equations and calculates various dynamical correlation functions for systems with off-diagonal Green's functions. For the archetypal correlated Hund's metal ${\mathrm{Sr}}_{2}{\mathrm{RuO}}_{4}$, we show that both the low-energy quasiparticle spectra related to the van Hove singularity and the high-energy atomic multiplet excitations can be faithfully resolved. In particular, we show that while the spin-orbit coupling has only minor effects on the orbital-diagonal one-particle spectral functions, it has a more profound impact on the low-energy spin and orbital response functions.

arXiv:2103.05545•Physical review. B./Physical review. B•Sep 9, 2021•22 citations

Solving multiorbital dynamical mean-field theory using natural orbitals renormalization group

Jiaming Wang, Yin Chen, Yi-Heng Tian +2 more

The natural orbitals renormalization group (NORG) has previously been proposed as an efficient numerical method for solving zero-temperature properties of multisite and multiorbital quantum impurity systems. Here, we implement the NORG as an impurity solver for dynamical mean-field theory (DMFT). In comparison with the exact diagonalization method, the NORG method can treat much more bath sites in an impurity model to which the DMFT maps a lattice model and can find accurate zero-temperature Matsubara and low-frequency retarded Green's functions. We demonstrate the effectiveness of this method on a two-orbital Hubbard model on the Bethe lattice and find successfully the orbital selective Mott transition with a Kondo resonance peak in the wide band and two holon-doublon bound state excitation peaks in the narrow band.

arXiv:2209.14178•Sep 28, 2022•0 citations

Strong-coupling solver for the quantum impurity model

Xi Dai, Kristjan Haule, Gabriel Kotliar

We propose a fast impurity solver for the general quantum impurity model based on the perturbation theory around the atomic limit, which can be used in combination with the local density approximation (LDA) and the dynamical mean-field theory (DMFT). We benchmark the solver in the two-band Hubbard model within DMFT against quantum Monte Carlo (QMC) and numerical renormalization-group (NRG) results. We find that the solver works very well in the paramagnetic Mott insulator phase. We also apply this impurity solver to the DMFT study of the antiferromagnetic phase transition in the unfrustrated Bethe lattice. The Neel temperature obtained by the fast impurity solver agrees very well with the QMC results in the large Hubbard U limit. The method is a promising tool to be used in combination with the $\mathrm{LDA}+\mathrm{DMFT}$ to study Mott insulators starting from first principles.

arXiv:cond-mat/0412505•Physical Review B•Jul 8, 2005•26 citations

Fast multi-orbital equation of motion impurity solver for dynamical mean field theory

Qingguo Feng, Peter M Oppeneer

We propose a fast multi-orbital impurity solver for dynamical mean field theory (DMFT). Our DMFT solver is based on the equations of motion (EOMs) for local Green's functions and is constructed by generalizing from the single-orbital case to the multi-orbital case with the inclusion of the inter-orbital hybridizations and applying a mean field approximation to the inter-orbital Coulomb interactions. The two-orbital Hubbard model is studied using this impurity solver within a large range of parameters. The Mott metal-insulator transition and the quasiparticle peak are well described. A comparison of the EOM method with the quantum Monte Carlo method is made for the two-orbital Hubbard model and good agreement is obtained. The developed method hence holds promise as a fast DMFT impurity solver in studies of strongly correlated systems.

arXiv:1108.2474•Journal of Physics Condensed Matter•Oct 4, 2011•5 citations

Continuous-time quantum Monte Carlo solver for dynamical mean field theory in the compact Legendre representation

Evan Sheridan, Cédric Weber, Evgeny A. Plekhanov +1 more

Dynamical mean-field theory (DMFT) is one of the most widely-used methods to treat accurately electron correlation effects in ab-initio real material calculations. Many modern large-scale implementations of DMFT in electronic structure codes involve solving a quantum impurity model with a continuous-time quantum Monte Carlo (CT-QMC) solver [Rubtsov et al., Phys. Rev. B 72, 035122 (2005); Werner et al., Phys. Rev. Lett. 97, 076405 (2006); Werner and Millis, Phys. Rev. B 74, 155107 (2006); Gull et al., Rev. Mod. Phys. 83, 349 (2011)]. The main advantage of CT-QMC is that, unlike standard quantum Monte Carlo approaches, it is able to generate the local Green's functions $G(\ensuremath{\tau})$ of the correlated system on an arbitrarily fine imaginary time $\ensuremath{\tau}$ grid, and is free of any systematic errors. In this work, we extend a hybrid QMC solver proposed by Khatami et al. [Phys. Rev. E 81, 056703 (2010)] and Rost et al. [Phys. Rev. E 87, 053305 (2013)] to a multiorbital context. This has the advantage of enabling impurity solver QMC calculations to scale linearly with inverse temperature $\ensuremath{\beta}$, and permit its application to $d$- and $f$-band materials. In addition, we present a Green's-function processing scheme which generates accurate quasicontinuous imaginary time solutions of the impurity problem which overcome errors inherent to standard QMC approaches. This solver and processing scheme are incorporated into a full DFT+DMFT calculation using the castep DFT code [Clark et al., Z. Kristallogr. 220, 567 (2005)]. Benchmark calculations for ${\mathrm{SrVO}}_{3}$ properties are presented. The computational efficiency of this method is also demonstrated.

arXiv:1811.12869•Physical review. B./Physical review. B•May 30, 2019•14 citations
We present a minimally entangled typical thermal state quantum impurity solver for general multiorbital systems at finite temperatures. We introduce an improved estimator for the single-particle Green's function that strongly reduces the large fluctuations at long imaginary time and low temperature, which were a severe limitation of the original algorithm. In combination with the fork tensor product states Ansatz, we obtain a dynamical mean field theory (DMFT) quantum impurity solver, which we benchmark for single and three-band models down to low temperatures, including the effect of spin-orbit coupling in a realistic DMFT computation for the Hund's metal Sr2RuO4{\mathrm{Sr}}_{2}{\mathrm{RuO}}_{4}Sr2​RuO4​ down to low temperatures.
We extend finite temperature tensor network methods to compute Matsubara imaginary time correlation functions, building on the minimally entangled typical thermal states (METTS) and purification algorithms. While imaginary time correlation functions are straightforward to formulate with these methods, care is needed to avoid convergence issues that would result from naive estimators. As a benchmark, we study the single-band Anderson impurity model, even though the algorithm is quite general and applies to lattice models. The special structure of the impurity model benchmark system and our choice of basis enable techniques such as the reuse of high-probability METTS for increasing algorithm efficiency. The results are competitive with state-of-the-art continuous-time Monte Carlo. We discuss the behavior of computation time and error as a function of the number of purified sites in the Hamiltonian.
We present a tree tensor-network impurity solver suited for general multiorbital systems. The network is constructed to efficiently capture the entanglement structure and symmetry of an impurity problem. The solver works directly on the real-time/frequency axis and generates spectral functions with energy-independent resolution of the order of one percent of the correlated bandwidth. Combined with an optimized representation of the impurity bath, it efficiently solves self-consistent dynamical mean-field equations and calculates various dynamical correlation functions for systems with off-diagonal Green's functions. For the archetypal correlated Hund's metal Sr2RuO4{\mathrm{Sr}}_{2}{\mathrm{RuO}}_{4}Sr2​RuO4​, we show that both the low-energy quasiparticle spectra related to the van Hove singularity and the high-energy atomic multiplet excitations can be faithfully resolved. In particular, we show that while the spin-orbit coupling has only minor effects on the orbital-diagonal one-particle spectral functions, it has a more profound impact on the low-energy spin and orbital response functions.
The natural orbitals renormalization group (NORG) has previously been proposed as an efficient numerical method for solving zero-temperature properties of multisite and multiorbital quantum impurity systems. Here, we implement the NORG as an impurity solver for dynamical mean-field theory (DMFT). In comparison with the exact diagonalization method, the NORG method can treat much more bath sites in an impurity model to which the DMFT maps a lattice model and can find accurate zero-temperature Matsubara and low-frequency retarded Green's functions. We demonstrate the effectiveness of this method on a two-orbital Hubbard model on the Bethe lattice and find successfully the orbital selective Mott transition with a Kondo resonance peak in the wide band and two holon-doublon bound state excitation peaks in the narrow band.
We propose a fast impurity solver for the general quantum impurity model based on the perturbation theory around the atomic limit, which can be used in combination with the local density approximation (LDA) and the dynamical mean-field theory (DMFT). We benchmark the solver in the two-band Hubbard model within DMFT against quantum Monte Carlo (QMC) and numerical renormalization-group (NRG) results. We find that the solver works very well in the paramagnetic Mott insulator phase. We also apply this impurity solver to the DMFT study of the antiferromagnetic phase transition in the unfrustrated Bethe lattice. The Neel temperature obtained by the fast impurity solver agrees very well with the QMC results in the large Hubbard U limit. The method is a promising tool to be used in combination with the LDA+DMFT\mathrm{LDA}+\mathrm{DMFT}LDA+DMFT to study Mott insulators starting from first principles.
We propose a fast multi-orbital impurity solver for dynamical mean field theory (DMFT). Our DMFT solver is based on the equations of motion (EOMs) for local Green's functions and is constructed by generalizing from the single-orbital case to the multi-orbital case with the inclusion of the inter-orbital hybridizations and applying a mean field approximation to the inter-orbital Coulomb interactions. The two-orbital Hubbard model is studied using this impurity solver within a large range of parameters. The Mott metal-insulator transition and the quasiparticle peak are well described. A comparison of the EOM method with the quantum Monte Carlo method is made for the two-orbital Hubbard model and good agreement is obtained. The developed method hence holds promise as a fast DMFT impurity solver in studies of strongly correlated systems.
Dynamical mean-field theory (DMFT) is one of the most widely-used methods to treat accurately electron correlation effects in ab-initio real material calculations. Many modern large-scale implementations of DMFT in electronic structure codes involve solving a quantum impurity model with a continuous-time quantum Monte Carlo (CT-QMC) solver [Rubtsov et al., Phys. Rev. B 72, 035122 (2005); Werner et al., Phys. Rev. Lett. 97, 076405 (2006); Werner and Millis, Phys. Rev. B 74, 155107 (2006); Gull et al., Rev. Mod. Phys. 83, 349 (2011)]. The main advantage of CT-QMC is that, unlike standard quantum Monte Carlo approaches, it is able to generate the local Green's functions $G(\ensuremath{\tau})$ of the correlated system on an arbitrarily fine imaginary time $\ensuremath{\tau}$ grid, and is free of any systematic errors. In this work, we extend a hybrid QMC solver proposed by Khatami et al. [Phys. Rev. E 81, 056703 (2010)] and Rost et al. [Phys. Rev. E 87, 053305 (2013)] to a multiorbital context. This has the advantage of enabling impurity solver QMC calculations to scale linearly with inverse temperature $\ensuremath{\beta}$, and permit its application to ddd- and fff-band materials. In addition, we present a Green's-function processing scheme which generates accurate quasicontinuous imaginary time solutions of the impurity problem which overcome errors inherent to standard QMC approaches. This solver and processing scheme are incorporated into a full DFT+DMFT calculation using the castep DFT code [Clark et al., Z. Kristallogr. 220, 567 (2005)]. Benchmark calculations for SrVO3{\mathrm{SrVO}}_{3}SrVO3​ properties are presented. The computational efficiency of this method is also demonstrated.