Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2312.12027

A continuous cold rubidium atomic beam with enhanced flux and tunable velocity

Shengzhe Wang, Zhixin Meng, and Peiqiang Yan, Yuanxing Liu, Yanying Feng

Published Dec 19, 2023• 0 citations
arXivHTMLPDF

Abstract

We present a cold atomic beam source based on a two-dimensional (2D)+ magneto-optical trap (MOT), capable of generating a continuous cold beam of 87Rb atoms with a flux up to 4.3*10^9 atoms/s, a mean velocity of 10.96(2.20) m/s, and a transverse temperature of 16.90(1.56) uK. Investigating the influence of high cooling laser intensity, we observe a significant population loss of atoms to hyperfine-level dark states. To account for this, we employ a multiple hyperfine level model to calculate the cooling efficiency associated with the population in dark states, subsequently modifying the scattering force. Simulations of beam flux at different cooling and repumping laser intensities using the modified scattering force are in agreement with experimental results. Optimizing repumping and cooling intensities enhances the flux by 50%. The influence of phase modulation on both the pushing and cooling lasers is experimentally studied, revealing that the mean velocity of cold atoms can be tuned from 9.5 m/s to 14.6 m/s with a phase-modulated pushing laser. The versatility of this continuous beam source, featuring high flux, controlled velocity, and narrow transverse temperature, renders it valuable for applications in atom interferometers and clocks, ultimately enhancing bandwidth, sensitivity, and signal contrast in these devices.

DOI
10.48550/arxiv.2312.12027

Related papers

Continuous cold rubidium atomic beam with enhanced flux and tunable velocity

Shengzhe Wang, Zhixin Meng, Peiqiang Yan +2 more

, a mean velocity of 10.96(2.20) m/s, and a transverse temperature of 16.90(1.56) µK. Investigating the influence of high cooling laser intensity, we observe a significant population loss of atoms to hyperfine-level dark states. To account for this, we employ a multiple hyperfine level model to calculate the cooling efficiency associated with the population in dark states, subsequently modifying the scattering force. Simulations of beam flux at different cooling and repumping laser intensities using the modified scattering force are in agreement with experimental results. Optimizing repumping and cooling intensities enhances the flux by 50%. The influence of phase modulation on both the pushing and cooling lasers is experimentally studied, revealing that the mean velocity of cold atoms can be tuned from 9.5 m/s to 14.6 m/s with a phase-modulated pushing laser. The versatility of this continuous beam source, featuring high flux, controlled velocity, and narrow transverse temperature, renders it valuable for applications in atom interferometers and clocks, ultimately enhancing bandwidth, sensitivity, and signal contrast in these devices.

Optics Express•Jan 31, 2024•5 citations

Three-Dimensional Cooling of an Atom-Beam Source for High-Contrast Atom Interferometry

Jonathan M. Kwolek, Charles Fancher, Mark Bashkansky +1 more

We present a compact, two-stage atomic beam source that produces a continuous, narrow, collimated, and high-flux beam of rubidium atoms with sub-Doppler temperatures in three dimensions, which features very low emission of near-resonance fluorescence along the atomic trajectory. The atom-beam source originates in a pushed two-dimensional magneto-optical trap ($2{\mathrm{D}}^{+}$ MOT) feeding a slightly off-axis three-dimensional moving optical-molasses stage that continuously cools and redirects the atom beam. The capture velocity of the moving optical molasses is deliberately chosen to be low, approximately $3\phantom{\rule{0.2em}{0ex}}\mathrm{m}/\mathrm{s}$, to reduce fluorescence, and the cooling light is detuned by several atomic linewidths from resonance to reduce the absorption cross section of cooling-induced fluorescence. Near-resonance light from the $2{\mathrm{D}}^{+}$ MOT and the push beam does not propagate to the output atomic trajectory due to a ${10}^{\ensuremath{\circ}}$ bend in the atomic trajectory. The atomic beam emitted from the two-stage source has a flux up to $1.6(3)\ifmmode\times\else\texttimes\fi{}{10}^{9}\phantom{\rule{0.2em}{0ex}}\mathrm{atoms}/\mathrm{s}$, with an optimized temperature of $15.0(2)\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{K}$. We employ continuous Raman-Ramsey interference measurements at the atom-beam output to study the sources of decoherence in the presence of continuous cooling, and demonstrate that the atom-beam source effectively preserves high fringe contrast even during cooling. This cold-atom-beam source is appropriate for use in atom interferometers and clocks, where continuous operation eliminates dead time, the slow atom-beam velocity (6--16 m/s) improves sensitivity, the narrow 3D velocity distribution improves fringe contrast, and the low reabsorption of scattered light mitigates decoherence caused by the continuous cooling process.

arXiv:2004.01057•Physical Review Applied•Apr 22, 2020•28 citations

Intense source of cold Rb atoms from a pure two-dimensional magneto-optical trap

Jürgen Schoser, Alexander Batär, R. Löw +4 more

We present a two-dimensional (2D) magneto-optical trap (MOT) setup for the production of a continuous collimated beam of cold ${}^{87}\mathrm{Rb}$ atoms out of a vapor cell. The underlying physics is purely two-dimensional cooling and trapping, which allows for a high flux of up to $6\ifmmode\times\else\texttimes\fi{}{10}^{10}$ atoms/s and a small divergence of the resulting beam. We analyze the velocity distribution of the 2D MOT. The longitudinal velocity distribution of the atomic beam shows a broad feature (full width at half maximum $\ensuremath{\simeq}75 \mathrm{m}/\mathrm{s}),$ centered around 50 m/s. The dependence of the flux on laser intensity, on geometry of the trapping volume, and on pressure in the vapor cell was investigated in detail. The influence of the geometry of the 2D MOT on the mean velocity of the cold beam has been studied. We present a simple model for the velocity distribution of the flux based on rate equations describing the general features of our source.

Physical Review A•Aug 26, 2002•119 citations

An intense 87Rb cold atomic source for atom interferometry

Li Yingying, Xiong Jijun, Zhikun Jiang

We present the implementation and characterization of a slow, intense, and collimated rubidium atomic source for atom interferometry. The continuous87Rb cold atomic beam is produced by a new compact two-dimensional magneto-optical trap. And it is based on the 2D+MOT design but a much smaller size and a higher flux compared to our original LVIS system. The on-line detecting system developed over a combination of time-of-flight and fluorescence methods is used to optimize the beam parameters. The dependence of the beam flux on detuning and power are investigated in detail respectively, for cooling and pushing laser. The re-pumping laser power influence is also considered. With aError! Reference source not found.10 G/cm magnetic gradient, 3ΓError! Reference source not found. red detuning from resonance for cooling laser and 5ΓError! Reference source not found. red detuning for pushing laser, the obtained cold atomic beam has a high flux of 4.7×109atoms/s Error! Reference source not found. Error! Reference source not found. It has a narrow longitudinal velocity distribution with mean velocity 10 m/s and full width at half maximum (FWHM)Error! Reference source not found.2 m/sError! Reference source not found. The two-photo stimulated Raman transitions both in Doppler-free and Doppler-sensitive modes are first proceeded, and stable Raman-Ramsey fringes are achieved with twon/2 Error! Reference source not found. Raman pulses.

International Conference on Optoelectronics and Microelectronics•Jul 1, 2015•0 citations

Low velocity intense rubidium beam source from a 3D magneto-optical trap

Xiaojia Wang, Yanying Feng, Hongbo Xue +1 more

We present an experimental set-up for the production of a beam source of cold 87Rb atoms, which is formed from a trapped cold atomic cloud in a three-dimensional (3D) magneto-optical trap (MOT). Via a radiation pressure difference generated by a specially designed leak tunnel along one trapping laser beam, the atoms are pushed out continuously with low velocity and high flux. The beam was measured to have a mean velocity of 12m/s and a longitudinal velocity spread of about 3m/s under nominal experimental conditions, based on the fluorescence and the time of flight (TOF) technologies. And its flux can be tuned by adjusting the MOT parameters from 108 to 109 atoms/s. Especially the beam performance dependence on trapping laser detuning and power is experimentally studied.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Aug 25, 2011•0 citations

Realization of an intense cold Rb atomic beam based on a two-dimensional magneto-optical trap: Experiments and comparison with simulations

Saptarishi Chaudhuri, Sanjukta Roy, C. S. Unnikrishnan

We discuss the implementation and characterization of the source of a slow, intense, and collimated beam of rubidium atoms. The cold atomic beam is produced by two-dimensional magneto-optical trapping in directions transverse to the atomic beam axis and unbalanced Doppler cooling in the axial direction. The vacuum design allows use of relatively low laser power and a considerably simplified assembly. The atomic beam has a high flux of about $2\ifmmode\times\else\texttimes\fi{}{10}^{10}\phantom{\rule{0.3em}{0ex}}\mathrm{atoms}∕\mathrm{s}$ at a total cooling laser power of $55\phantom{\rule{0.3em}{0ex}}\mathrm{mW}$. It has a narrow longitudinal velocity distribution with mean velocity $15\phantom{\rule{0.3em}{0ex}}\mathrm{m}∕\mathrm{s}$ with full width at half maximum $3.5\phantom{\rule{0.3em}{0ex}}\mathrm{m}∕\mathrm{s}$ and has a low divergence of $26\phantom{\rule{0.3em}{0ex}}\mathrm{mrad}$. The high flux enables ultrafast loading of about ${10}^{10}$ atoms into a three-dimensional (3D) magneto-optical trap within 500 ms. The variation of the atomic beam flux was studied as a function of the rubidium vapor pressure, cooling laser power, transverse cooling laser beam length, detuning of the cooling laser, and relative intensities of the cooling beams along the atomic beam axis. We also discuss a detailed comparison of our measurements of the cold atomic beam with a 3D numerical simulation.

Physical Review A•Aug 18, 2006•63 citations
We present a cold atomic beam source based on a two-dimensional (2D)+ magneto-optical trap (MOT), capable of generating a continuous cold beam of 87Rb atoms with a flux up to 4.3*10^9 atoms/s, a mean velocity of 10.96(2.20) m/s, and a transverse temperature of 16.90(1.56) uK. Investigating the influence of high cooling laser intensity, we observe a significant population loss of atoms to hyperfine-level dark states. To account for this, we employ a multiple hyperfine level model to calculate the cooling efficiency associated with the population in dark states, subsequently modifying the scattering force. Simulations of beam flux at different cooling and repumping laser intensities using the modified scattering force are in agreement with experimental results. Optimizing repumping and cooling intensities enhances the flux by 50%. The influence of phase modulation on both the pushing and cooling lasers is experimentally studied, revealing that the mean velocity of cold atoms can be tuned from 9.5 m/s to 14.6 m/s with a phase-modulated pushing laser. The versatility of this continuous beam source, featuring high flux, controlled velocity, and narrow transverse temperature, renders it valuable for applications in atom interferometers and clocks, ultimately enhancing bandwidth, sensitivity, and signal contrast in these devices.
, a mean velocity of 10.96(2.20) m/s, and a transverse temperature of 16.90(1.56) µK. Investigating the influence of high cooling laser intensity, we observe a significant population loss of atoms to hyperfine-level dark states. To account for this, we employ a multiple hyperfine level model to calculate the cooling efficiency associated with the population in dark states, subsequently modifying the scattering force. Simulations of beam flux at different cooling and repumping laser intensities using the modified scattering force are in agreement with experimental results. Optimizing repumping and cooling intensities enhances the flux by 50%. The influence of phase modulation on both the pushing and cooling lasers is experimentally studied, revealing that the mean velocity of cold atoms can be tuned from 9.5 m/s to 14.6 m/s with a phase-modulated pushing laser. The versatility of this continuous beam source, featuring high flux, controlled velocity, and narrow transverse temperature, renders it valuable for applications in atom interferometers and clocks, ultimately enhancing bandwidth, sensitivity, and signal contrast in these devices.
We present a compact, two-stage atomic beam source that produces a continuous, narrow, collimated, and high-flux beam of rubidium atoms with sub-Doppler temperatures in three dimensions, which features very low emission of near-resonance fluorescence along the atomic trajectory. The atom-beam source originates in a pushed two-dimensional magneto-optical trap (2D+2{\mathrm{D}}^{+}2D+ MOT) feeding a slightly off-axis three-dimensional moving optical-molasses stage that continuously cools and redirects the atom beam. The capture velocity of the moving optical molasses is deliberately chosen to be low, approximately 3m/s3\phantom{\rule{0.2em}{0ex}}\mathrm{m}/\mathrm{s}3m/s, to reduce fluorescence, and the cooling light is detuned by several atomic linewidths from resonance to reduce the absorption cross section of cooling-induced fluorescence. Near-resonance light from the 2D+2{\mathrm{D}}^{+}2D+ MOT and the push beam does not propagate to the output atomic trajectory due to a ${10}^{\ensuremath{\circ}}$ bend in the atomic trajectory. The atomic beam emitted from the two-stage source has a flux up to $1.6(3)\ifmmode\times\else\texttimes\fi{}{10}^{9}\phantom{\rule{0.2em}{0ex}}\mathrm{atoms}/\mathrm{s}$, with an optimized temperature of $15.0(2)\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\mathrm{K}$. We employ continuous Raman-Ramsey interference measurements at the atom-beam output to study the sources of decoherence in the presence of continuous cooling, and demonstrate that the atom-beam source effectively preserves high fringe contrast even during cooling. This cold-atom-beam source is appropriate for use in atom interferometers and clocks, where continuous operation eliminates dead time, the slow atom-beam velocity (6--16 m/s) improves sensitivity, the narrow 3D velocity distribution improves fringe contrast, and the low reabsorption of scattered light mitigates decoherence caused by the continuous cooling process.
We present a two-dimensional (2D) magneto-optical trap (MOT) setup for the production of a continuous collimated beam of cold 87Rb{}^{87}\mathrm{Rb}87Rb atoms out of a vapor cell. The underlying physics is purely two-dimensional cooling and trapping, which allows for a high flux of up to $6\ifmmode\times\else\texttimes\fi{}{10}^{10}$ atoms/s and a small divergence of the resulting beam. We analyze the velocity distribution of the 2D MOT. The longitudinal velocity distribution of the atomic beam shows a broad feature (full width at half maximum $\ensuremath{\simeq}75 \mathrm{m}/\mathrm{s}),$ centered around 50 m/s. The dependence of the flux on laser intensity, on geometry of the trapping volume, and on pressure in the vapor cell was investigated in detail. The influence of the geometry of the 2D MOT on the mean velocity of the cold beam has been studied. We present a simple model for the velocity distribution of the flux based on rate equations describing the general features of our source.
We present the implementation and characterization of a slow, intense, and collimated rubidium atomic source for atom interferometry. The continuous87Rb cold atomic beam is produced by a new compact two-dimensional magneto-optical trap. And it is based on the 2D+MOT design but a much smaller size and a higher flux compared to our original LVIS system. The on-line detecting system developed over a combination of time-of-flight and fluorescence methods is used to optimize the beam parameters. The dependence of the beam flux on detuning and power are investigated in detail respectively, for cooling and pushing laser. The re-pumping laser power influence is also considered. With aError! Reference source not found.10 G/cm magnetic gradient, 3ΓError! Reference source not found. red detuning from resonance for cooling laser and 5ΓError! Reference source not found. red detuning for pushing laser, the obtained cold atomic beam has a high flux of 4.7×109atoms/s Error! Reference source not found. Error! Reference source not found. It has a narrow longitudinal velocity distribution with mean velocity 10 m/s and full width at half maximum (FWHM)Error! Reference source not found.2 m/sError! Reference source not found. The two-photo stimulated Raman transitions both in Doppler-free and Doppler-sensitive modes are first proceeded, and stable Raman-Ramsey fringes are achieved with twon/2 Error! Reference source not found. Raman pulses.
We present an experimental set-up for the production of a beam source of cold 87Rb atoms, which is formed from a trapped cold atomic cloud in a three-dimensional (3D) magneto-optical trap (MOT). Via a radiation pressure difference generated by a specially designed leak tunnel along one trapping laser beam, the atoms are pushed out continuously with low velocity and high flux. The beam was measured to have a mean velocity of 12m/s and a longitudinal velocity spread of about 3m/s under nominal experimental conditions, based on the fluorescence and the time of flight (TOF) technologies. And its flux can be tuned by adjusting the MOT parameters from 108 to 109 atoms/s. Especially the beam performance dependence on trapping laser detuning and power is experimentally studied.
We discuss the implementation and characterization of the source of a slow, intense, and collimated beam of rubidium atoms. The cold atomic beam is produced by two-dimensional magneto-optical trapping in directions transverse to the atomic beam axis and unbalanced Doppler cooling in the axial direction. The vacuum design allows use of relatively low laser power and a considerably simplified assembly. The atomic beam has a high flux of about $2\ifmmode\times\else\texttimes\fi{}{10}^{10}\phantom{\rule{0.3em}{0ex}}\mathrm{atoms}∕\mathrm{s}$ at a total cooling laser power of 55mW55\phantom{\rule{0.3em}{0ex}}\mathrm{mW}55mW. It has a narrow longitudinal velocity distribution with mean velocity 15m∕s15\phantom{\rule{0.3em}{0ex}}\mathrm{m}∕\mathrm{s}15m∕s with full width at half maximum 3.5m∕s3.5\phantom{\rule{0.3em}{0ex}}\mathrm{m}∕\mathrm{s}3.5m∕s and has a low divergence of 26mrad26\phantom{\rule{0.3em}{0ex}}\mathrm{mrad}26mrad. The high flux enables ultrafast loading of about 1010{10}^{10}1010 atoms into a three-dimensional (3D) magneto-optical trap within 500 ms. The variation of the atomic beam flux was studied as a function of the rubidium vapor pressure, cooling laser power, transverse cooling laser beam length, detuning of the cooling laser, and relative intensities of the cooling beams along the atomic beam axis. We also discuss a detailed comparison of our measurements of the cold atomic beam with a 3D numerical simulation.