The synthesis of single-qudit unitaries has mainly been understudied, resulting in inflexible and non-optimal analytical solutions, as well as inefficient and impractical numerical solutions. To address this challenge, we introduce QSweep, a guided numerical synthesizer that produces pulse-optimal single-qudit decompositions for any subspace gateset, outperforming all prior solutions. When decomposing ququart gates, QSweep created circuits 4100x (up to 23500x) faster than QSearch with an average of 7.9 fewer pulses than analytical solutions, resulting in an overall 1.54x and 2.36x improvement in experimental single-qutrit and ququart gate fidelity as measured by randomized benchmarking.
The synthesis of single-qudit unitaries has mainly been understudied, resulting in inflexible and non-optimal analytical solutions, as well as inefficient and impractical numerical solutions. To address this challenge, we introduce QSweep, a guided numerical synthesizer that produces pulse-optimal single-qudit decompositions for any subspace gateset, outperforming all prior solutions. When decomposing ququart gates, QSweep created circuits 4100x (up to 23500x) faster than QSearch with an average of 7.9 fewer pulses than analytical solutions, resulting in an overall 1.54x and 2.36x improvement in experimental single-qutrit and ququart gate fidelity as measured by randomized benchmarking.
While showing great promise, circuit synthesis techniques that combine numerical optimization with search over circuit structures face scalability challenges due to a large number of parameters, exponential search spaces, and complex objective functions. The LEAP algorithm improves scaling across these dimensions using iterative circuit synthesis, incremental reoptimization, dimensionality reduction, and improved numerical optimization. LEAP draws on the design of the optimal synthesis algorithm QSearch by extending it with an incremental approach to determine constant prefix solutions for a circuit. By narrowing the search space, LEAP improves scalability from four to six qubit circuits. LEAP was evaluated with known quantum circuits such as QFT and physical simulation circuits like the VQE, TFIM, and QITE. LEAP can compile four qubit unitaries up to 59× faster than QSearch and five and six qubit unitaries with up to 1.2× fewer CNOTs compared to the QFAST package. LEAP can reduce the CNOT count by up to 36×, or 7× on average, compared to the CQC Tket compiler. Despite its heuristics, LEAP has generated optimal circuits for many test cases with a priori known solutions. The techniques introduced by LEAP are applicable to other numerical optimization based synthesis approaches.
The current phase of quantum computing is in the Noisy Intermediate-Scale Quantum (NISQ) era. On NISQ devices, two-qubit gates such as CNOTs are much noisier than single-qubit gates, so it is essential to minimize their count. Quantum circuit synthesis is a process of decomposing an arbitrary unitary into a sequence of quantum gates, and can be used as an optimization tool to produce shorter circuits to improve overall circuit fidelity. However, the time-to-solution of synthesis grows exponentially with the number of qubits. As a result, synthesis is intractable for circuits on a large qubit scale. In this paper, we propose a hierarchical, block-by-block optimization framework, QGo, for quantum circuit optimization. Our approach allows an exponential cost optimization to scale to large circuits. QGo uses a combination of partitioning and synthesis: 1) partition the circuit into a sequence of independent circuit blocks; 2) re-generate and optimize each block using quantum synthesis; and 3) re-compose the final circuit by stitching all the blocks together. We perform our analysis and show the fidelity improvements in three different regimes: small-size circuits on real devices, medium-size circuits on noise simulations, and large-size circuits on analytical models. Using a set of NISQ benchmarks, we show that QGo can reduce the number of CNOT gates by 29.9% on average and up to 50% when compared with industrial compilers such as t|ket>. When executed on the IBM Athens system, shorter depth leads to higher circuit fidelity. We also demonstrate the scalability of our QGo technique to optimize circuits of 60+ qubits. Our technique is the first demonstration of successfully employing and scaling synthesis in the compilation toolchain for large circuits. Overall, our approach is robust for direct incorporation in production compiler toolchains.
Advanced simulations and calculations on quantum computers require high-fidelity implementations of quantum operations. The universal gateset approach builds complex unitaries from a small set of primitive gates, often resulting in a long gate sequence, which is typically a leading factor in the total accumulated error. Compiling a complex unitary for processors with higher-dimensional logical elements, such as qutrits, exacerbates the accumulated error per unitary, since an even longer gate sequence is required. Optimal control methods promise time- and resource-efficient compact gate sequences and, therefore, higher fidelity. These methods generate pulses that can directly implement any complex unitary on a quantum device. In this work, we demonstrate that any arbitrary qubit and qutrit gate can be realized with high fidelity, which can significantly reduce the length of a gate sequence. We generate and test pulses for a large set of randomly selected arbitrary unitaries on several quantum processing units (QPUs): the Lawrence Livermore National Laboratory Quantum Device and Integration Testbed's (QuDIT's) standard QPU and three of Rigetti's QPUs: Ankaa-2, Ankaa-9Q-1, and Aspen-M-3. On the QuDIT platform's standard QPU, the average fidelity of random qutrit gates is $97.9\ifmmode\pm\else\textpm\fi{}0.5\mathrm{%}$ measured with conventional QPT and $98.8\ifmmode\pm\else\textpm\fi{}0.6\mathrm{%}$ from QPT with gate folding. Rigetti's Ankaa-2 achieves random qubit gates with an average fidelity of $98.4\ifmmode\pm\else\textpm\fi{}0.5\mathrm{%}$ (conventional QPT) and $99.7\ifmmode\pm\else\textpm\fi{}0.1\mathrm{%}$ (QPT with gate folding). On Ankaa-9Q-1 and Aspen-M-3, the average fidelities with conventional qubit QPT measurements were higher than 99% (see Appendix). We show that optimal control gates are robust to drift for at least 3 h and that the same calibration parameters can be used for all implemented gates. Our work promises that the calibration overheads for optimal control gates can be made small enough to enable efficient quantum circuits based on this technique.
Qutrits offer the potential for enhanced quantum computation by exploiting an enlarged Hilbert space. However, the synthesis of high-fidelity and fast qutrit gates, particularly for single qutrits, remains an ongoing challenge, as it involves overcoming intrinsic constraints in quantum platforms. Here, we develop a novel framework for the efficient implementation of a single-qutrit gate set via coherent control, leveraging SU(3) dynamics while obviating platform-specific constraints such as those arising from the selection rule. As a proof-of-principle demonstration, we realize 35-ns qutrit hadamard and x gates using a superconducting transmon, achieving an average fidelity of 99.5%, as verified by randomized benchmarking. We further demonstrate two paradigmatic quantum circuits, which can be naturally extended to scalable qudit algorithms for phase estimation and parity check. In addition, we propose an SU(3)-based decomposition strategy for an arbitrary single-qutrit gate and numerically demonstrate its substantial efficiency improvement over conventional SU(2)-based protocols. By addressing the challenge of efficiently implementing single-qutrit gates, our protocol paves the way for realizing high-performance qutrit processors in diverse quantum platforms.
Quantum computation with d-level quantum systems, also known as qudits, benefits from the possibility to use a richer computational space compared to qubits. However, for an arbitrary qudit-based hardware platform, the issue is that a generic qudit operation has to be decomposed into the sequence of native operations—pulses that are adjusted to the transitions between two levels in a qudit. Typically, not all levels in a qudit are simply connected to each other due to specific selection rules. Moreover, the number of pulses plays a significant role, since each pulse takes a certain execution time and may introduce error. In this paper, we propose a resource-efficient algorithm to decompose single-qudit operations into the sequence of pulses that are allowed by qudit selection rules. Using the developed algorithm, the number of pulses is at most d(d−1)/2 for an arbitrary single-qudit operation. For specific operations, the algorithm could produce even fewer pulses. We provide a comparison of qudit decompositions for several types of trapped ions, specifically Yb+171, Ba+137 and Ca+40 with different selection rules, and also decomposition for superconducting qudits. Although our approach deals with single-qudit operations, the proposed approach is important for realizing two-qudit operations since they can be implemented as a standard two-qubit gate that is surrounded by efficiently implemented single-qudit gates.
Although much work has been devoted to multivalued quantum logic synthesis, the question of whether multivalued quantum circuits are more efficient than conventional binary quantum circuits is still open. This article is devoted to the optimization of generic multivalued quantum circuits. Multivalued quantum Shannon decompositions are improved so that the circuits obtained are asymptotically optimal for all dimensionality d. The syntheses of uniformly multifold controlled Ry rotations are also optimized to make the circuits further simplified. Moreover, the theoretical lower bound of complexity for multivalued quantum circuits is investigated, and a quantity known as the efficiency index is proposed to evaluate the efficiency of the synthesis of various quantum circuits. The algorithm for qudit circuits given here is an efficient synthesis routine which produces improved results for all dimensionality d, whether the number of qudits n is small or large. The two facts, the leading factor of the lower bound of complexity for qudit circuits is small by a factor of $d\ensuremath{-}1$ in comparison to that for qubit circuits and the asymptotic efficiency index is increased with an increase of dimensionality d, reveal the potential advantage of qudit circuits over generic qubit circuits. Generic n-qudit circuits with $d\ensuremath{\ge}5$ and generic two-ququart circuits synthesized by the algorithm given here are practical circuits which are more efficient than the most efficient qubit circuits.