Towards the efficient simulation of near-term quantum devices using tensor network states, we introduce an improved real-space parallelizable matrix-product state (MPS) compression method. This method enables efficient compression of all virtual bonds in constant time, irrespective of the system size, with controlled accuracy, while it maintains the stability of the wave-function norm without necessitating sequential renormalization procedures. In addition, we introduce a parallel regauging technique to partially restore the deviated canonical form, thereby improving the accuracy of the simulation in subsequent steps. We further apply this method to simulate unitary quantum dynamics and introduce an improved parallel time-evolving block-decimation (pTEBD) algorithm. We employ the improved pTEBD algorithm for extensive simulations of typical one- and two-dimensional quantum circuits, involving over 1000 qubits. The obtained numerical results unequivocally demonstrate that the improved pTEBD algorithm achieves the same level of simulation precision as the current state-of-the-art MPS algorithm but in polynomially shorter time, exhibiting nearly perfect weak scaling performance on a modern supercomputer.
Towards the efficient simulation of near-term quantum devices using tensor network states, we introduce an improved real-space parallelizable matrix-product state (MPS) compression method. This method enables efficient compression of all virtual bonds in constant time, irrespective of the system size, with controlled accuracy, while it maintains the stability of the wave-function norm without necessitating sequential renormalization procedures. In addition, we introduce a parallel regauging technique to partially restore the deviated canonical form, thereby improving the accuracy of the simulation in subsequent steps. We further apply this method to simulate unitary quantum dynamics and introduce an improved parallel time-evolving block-decimation (pTEBD) algorithm. We employ the improved pTEBD algorithm for extensive simulations of typical one- and two-dimensional quantum circuits, involving over 1000 qubits. The obtained numerical results unequivocally demonstrate that the improved pTEBD algorithm achieves the same level of simulation precision as the current state-of-the-art MPS algorithm but in polynomially shorter time, exhibiting nearly perfect weak scaling performance on a modern supercomputer.
The Thesis explores the application of Matrix Product States (MPS) in the domain of quantum many-body systems and quantum computing, show casing the versatility and effectiveness of MPS for addressing complex com putational challenges. The opening chapter introduces essential tools for Tensor Networks, addressing the curse of dimensionality and elucidating the main characteristics of Matrix Product States and Matrix Product Op erators. The discussion encompasses also important numerical techniques, including Density Matrix Renormalization Group and Time Evolving Block Decimation. Furthermore, the relation between MPS and quantum circuits is discussed. The subsequent Chapters delve into specific applications of MPS. In the second Chapter, we introduce a Tensor Network ansatz inspired by the backflow transformation for correlated systems. This extension of the MPS representation ensures an area law for entanglement in dimensions one or greater. We employ an optimization scheme combining DMRG and variational Monte Carlo algorithms for efficient ground-state search. Bench marking against spin models demonstrates high accuracy. The third Chapter explores quantum annealing for optimizing complex classical spin Hamil tonians, as the Hopfield model and the binary perceptron. We introduce an efficient Tensor Network representation for the adiabatic time evolution of quantum annealing, enabling scalable classical simulations. The use of MPS in mitigating Trotter errors and mapping to quantum circuits is also explored. In the fourth Chapter we present a novel method for evaluating the amount of nonstabilizerness (also known as quantum magic) contained in an MPS. We overcome the exponentially hard evaluation of this quan tity by employing a simple perfect sampling technique of Pauli string. Our innovative MPS approach enables efficient computation. Benchmarked on magic states and the quantum Ising chain ground state, this method offers easy access to the non-equilibrium dynamics of nonstabilizerness following a quantum quench. The Appendices provide additional insights, including: an introduction to variational Monte Carlo, technical details on MPS simula tions for the quantum annealing and a comprehensive overview on stabilizer formalism and nonstabilizerness.
Abstract Classical simulations of quantum circuits are vital for assessing potential quantum advantage and benchmarking devices, yet they require sophisticated methods to avoid the exponential growth of resources. Tensor network approaches, in particular matrix product states (MPS) combined with the time-evolving block decimation (TEBD) algorithm, currently dominate large-scale circuit simulations. These methods scale efficiently when entanglement is limited but suffer rapid bond dimension growth with increasing entanglement and handle long-range gates via costly SWAP insertions. Motivated by the success of the time-dependent variational principle (TDVP) in many-body physics, we reinterpret quantum circuits as series of discrete time evolutions, using gate generators to construct an MPS-based circuit simulation via a local TDVP formulation. This addresses TEBD's key limitations by (1) naturally accommodating long-range gates and (2) optimally representing states on the MPS manifold. By diffusing entanglement more globally, the method suppresses local bond growth and reduces memory and runtime costs. We benchmark the approach on five 49-qubit circuits: three Hamiltonian circuits (1D open and periodic Heisenberg, 2D 7x7 Ising) and two algorithmic ones (quantum approximate optimization, hardware-efficient ansatz). Across all cases, our method yields substantial resource reductions over standard tools, establishing a new state-of-the-art for circuit simulation and enabling advances across quantum computing, condensed matter, and beyond.
Numerical methods for obtaining exact dynamics of non-Markovian open quantum systems are mostly limited to either small systems or to short-time evolution only. Here, we propose a new algorithm for computing process tensors--matrix product operator (MPO) representations that capture the environment influence--which achieves greatly enhanced computational scalings with system size, while maintaining linear scaling with simulation length. We build on recent developments in the field which allow for long-time evolutions through process tensors which have a time-translational invariance. These can be built for general Gaussian environments and generic coupling operators with the system using infinite time-evolving block decimation (iTEBD). We introduce a modified iTEBD algorithm using intermediate compression steps which bring down the computation time scaling with system size d from O(d8) to O(d4), as well as significantly lowering the required memory. To illustrate the power of this method, we apply it to the problem of dispersive qubit readout in circuit QED, which was previously out-of-reach numerically. The full treatment of the measurement resonator, which requires a large system space, combined with the long simulation times precipitated by the separation of timescales between the measurement drive and the environment dissipation, is now possible. The algorithm we introduce not only allows for capturing non-Markovian dynamics in large open quantum systems, but also further extends all the existing capabilities of process tensors, for example in quantum optimal control, or in computation of multi-time correlations or of steady states, to more complex systems with tens of levels.
Simulating quantum many-body systems (QMBS) is one of the long-standing, highly non-trivial challenges in condensed matter physics and quantum information due to the exponentially growing size of the system's Hilbert space. To date, tensor networks have been an essential tool for studying such quantum systems, owing to their ability to efficiently capture the entanglement properties of the systems they represent. One of the well-known tensor network architectures, namely matrix product states (MPS), is the standard method for simulating one-dimensional QMBS. Here, we propose a simple, yet efficient, method to augment the already available MPS algorithms to simulate the dynamics of time-dependent Hamiltonians with better accuracy and a faster convergence rate, giving a second-order convergence compared to the first-order convergence of the standard method. We apply our proposed method to simulate the dynamics of a chain of single spins associated with nitrogen-vacancy color centers in diamonds, which has potential applications for practical and scalable quantum technologies, and find that our method improves the average error for a system of few NV centers by a factor of about 1000 for moderate step sizes. Our work paves the way for efficient simulation of QMBS under the influence of time-dependent Hamiltonians.
We introduce a simple yet significant improvement to the time-evolving block decimation (TEBD) tensor network algorithm for simulating the time dynamics of strongly correlated one-dimensional (1D) mixed quantum states. The efficiency of 1D tensor network methods stems from using a product of matrices to express either: the coefficients of a wavefunction, yielding a matrix product state (MPS); or the expectation values of a density matrix, yielding a matrix product density operator (MPDO). To avoid exponential computational costs, TEBD truncates the matrix dimension while simulating the time evolution. However, when truncating an MPDO, TEBD does not favor the likely more important low-weight expectation values, such as \langle c_i^\dagger c_j \rangle ⟨ c i † c j ⟩ , over the exponentially many high-weight expectation values, such as \langle c_{i_1}^\dagger c^\dagger_{i_2} \cdots c_{i_n} \rangle ⟨ c i 1 † c i 2 † ⋯ c i n ⟩ of weight n n , despite the critical importance of the low-weight expectation values. Motivated by this shortcoming, we propose a reweighted TEBD (rTEBD) algorithm that deprioritizes high-weight expectation values by a factor of \gamma^{-n} γ − n during the truncation. This modification makes rTEBD significantly more accurate than the TEBD time-dependent simulation of an MPDO, and competitive with and sometimes better than TEBD using MPS. Furthermore, by prioritizing low-weight expectation values, rTEBD preserves conserved quantities to high precision.
We optimize matrix-product state-based algorithms for simulating quantum circuits with finite fidelity, specifically the time-evolving block decimation (TEBD) and the density-matrix renormalization group (DMRG) algorithms, by exploiting the irregular arrangement of entangling operations in circuits. We introduce a variation of the standard TEBD algorithm, we termed “cluster-TEBD,” which dynamically arranges qubits into entanglement clusters, enabling the exact contraction of multiple circuit layers in a single time step. Moreover, we enhance the DMRG algorithm by introducing an adaptive protocol, which analyzes the entanglement distribution within each circuit section to be contracted, dynamically adjusting the qubit grouping at each iteration. We analyze the performances of these enhanced algorithms in simulating both stabilizer and nonstabilizer random-structured quantum circuits, with up to 1000 qubits and 100 layers of Clifford and non-Clifford gates, and in simulating Shor's quantum algorithm with up to hundreds of thousands of layers. Our findings show that, even with reasonable computational resources per task, cluster-based approaches can significantly speed up simulations of large-sized quantum circuits and improve the fidelity of the final states.