Parametric amplifiers are essential in modern quantum technology, for enhancing weak signals with the minimal added noise of half a photon, and for working at higher temperatures and magnetic fields than Josephson junctions can handle. The authors present a kinetic inductance parametric amplifier (KIPA) that excels in dynamic range, operational temperature, and magnetic field resilience, and offers quantum-limited amplification. This KIPA's robust performance and compatibility promise transformative impacts on quantum information processing and low-temperature quantum research.
Parametric amplifiers are essential in modern quantum technology, for enhancing weak signals with the minimal added noise of half a photon, and for working at higher temperatures and magnetic fields than Josephson junctions can handle. The authors present a kinetic inductance parametric amplifier (KIPA) that excels in dynamic range, operational temperature, and magnetic field resilience, and offers quantum-limited amplification. This KIPA's robust performance and compatibility promise transformative impacts on quantum information processing and low-temperature quantum research.
Parametric converters are parametric amplifiers that mix two spatially separate nondegenerate modes and are commonly used for amplifying and squeezing microwave signals in quantum computing and sensing. In Josephson parametric converters, the strong localized nonlinearity of the Josephson junction limits the amplification and squeezing, as well as the dynamic range, in current devices. In contrast, a weak distributed nonlinearity can provide higher gain and dynamic range, when implemented as a kinetic inductance (KI) nanowire of a dirty superconductor, and has additional benefits such as resilience to magnetic field, higher-temperature operation, and simplified fabrication. Here, we propose, demonstrate, and analyze the performance of a KI parametric converter that relies on the weak distributed nonlinearity of a Nb-Ti-N KI nanowire. The device utilizes three-wave mixing induced by a dc current bias. We demonstrate its operation as a nondegenerate parametric amplifier with high phase-sensitive gain, reaching two-mode amplification and deamplification of approximately 30 dB for two resonances separated by 0.8 GHz, in excellent agreement with our theory of the device. We observe a dynamic range of $\ensuremath{-}108$ dBm at 30 dB gain. Our device can significantly broaden applications of quantum-limited signal processing devices including phase-preserving amplification and two-mode squeezing.
A quantum-limited amplifier enables the amplification of weak signals while introducing minimal noise dictated by the principles of quantum mechanics. Such amplifiers serve a broad spectrum of applications in quantum computing, including fast and accurate readout of superconducting qubits and spins, as well as various uses in quantum sensing and metrology. Parametric amplification, primarily developed with use of Josephson junctions, has evolved into the leading technology for highly effective microwave measurements within quantum circuits. Despite their significant contributions, these amplifiers face fundamental limitations, such as their inability to handle high powers, their sensitivity to parasitic magnetic fields, and particularly their limitation to operate only at millikelvin temperatures. To tackle these challenges, here we experimentally develop a novel quantum-limited amplifier based on superconducting kinetic inductance and present an extensive theoretical model to describe this nonlinear coupled-mode system. Our device surpasses the conventional constraints associated with Josephson-junction amplifiers by operating at much higher temperatures up to 4.5 K. With two distinct spectral modes and tunability through bias current, this amplifier can operate selectively in both the single-mode-amplification regime and the double-mode-amplification regime near the quantum noise limit. Using a nonlinear thin film exhibiting kinetic inductance, our device attains gain exceeding 50 dB in a single-mode configuration and 32 dB in a double-mode configuration, while adding 0.82 input-referred noise quanta. Importantly, this amplifier eliminates the need for Josephson junctions, resulting in the capability to handle significantly higher powers than Josephson junction--based amplifiers. It also demonstrates resilience in the presence of magnetic fields, offers a straightforward design, and increases reliability. This positions the amplifier as a versatile solution for quantum applications and facilitates its integration into future superconducting quantum computers.
Microwave parametric amplifiers operating at the quantum noise limit have become indispensable tools for a range of cryogenic quantum technologies. These amplifiers are typically constructed from nonlinear Josephson junctions, which limit the ability to amplify high-power signals. This study reports a device based instead on the weakly nonlinear kinetic inductance intrinsic to a superconducting film of niobium titanium nitride. The amplifier offers large phase-sensitive gain and high power handling, plus a simple design and fabrication process. As it contains no junctions, it is robust to electrostatic discharge and potentially operable under high temperatures and large magnetic fields.
Superconducting parametric amplifiers are crucial components in microwave quantum circuits for enabling quantum-limited signal readout.The best-performing such amplifiers are often based on Josephson junctions, which however are sensitive to magnetic fields.Therefore, they require magnetic shields and are not easily integratable with other quantum systems that operate within magnetic fields, such as spinensemble quantum memories.To tackle this challenge, we develop a kinetic inductance-based parametric amplifier featuring a NbN nanobridge instead of Josephson junctions, which provides the desired nonlinearity for a strong parametric gain up to 42 dB.The added noise of this nanobridge kinetic-inductance parametric amplifier (hereby referred to as NKPA) is calibrated and found to be 0.59 ± 0.03 quanta for phase-preserving amplification, approaching the quantum limit of 0.5 quanta.Most importantly, we show that such excellent noise performance is preserved in an in-plane magnetic field up to 427 mT, the maximum field available in our experiment.This magnetic-field-resilient parametric amplifier presents an opportunity towards addressing single electron-spin resonance and more efficient search for axions as well as Majorana fermions.
Parametric amplification is essential for quantum measurement, enabling the amplification of weak microwave signals with minimal added noise. While Josephson-junction-based amplifiers have become standard in superconducting quantum circuits, their magnetic sensitivity, limited saturation power, and sub-kelvin operating requirements motivate the development of alternative nonlinear platforms. Here we demonstrate a two-mode kinetic-inductance parametric amplifier based on a pair of capacitively coupled Kerr-nonlinear resonators fabricated from NbTiN and NbN thin films. The distributed Kerr nonlinearity of these materials enables nondegenerate four-wave-mixing amplification with gains approaching 40 dB, gain-bandwidth products up to 6.9 MHz, and 1-dB compression powers two to three orders of magnitude higher than those of state-of-the-art Josephson amplifiers. A coupled-mode theoretical model accurately captures the pump-induced modification of the hybridized modes and quantitatively reproduces the observed signal and idler responses. The NbN device exhibits a significantly larger Kerr coefficient and superior gain-bandwidth performance, highlighting the advantages of high-kinetic-inductance materials. Our results establish coupled kinetic-inductance resonators as a robust platform for broadband, high-power, and magnetically resilient quantum-limited amplification, offering a scalable route for advanced readout in superconducting qubits, spin ensembles, quantum dots, and other microwave-quantum technologies.
Kinetic-inductance traveling-wave parametric amplifiers (KI-TWPAs) offer broadband near-quantum-limited amplification with high saturation power. Due to the high critical magnetic fields of high-kinetic-inductance materials, KI-TWPAs should be resilient to magnetic fields. In this work, we study how magnetic field and temperature affect the performance of a KI-TWPA based on a thin-NbTiN inverse microstrip with a Nb ground plane. This KI-TWPA can provide substantial signal-to-noise ratio improvement (ΔSNR) up to in-plane magnetic fields of 0.35T and out-of-plane fields of 50mT, considerably higher than what has been demonstrated with TWPAs based on Josephson junctions. The field compatibility can be further improved by incorporating vortex traps and by using materials with higher critical fields. We also find that the gain does not degrade when the temperature is raised to 3K (limited by the Nb ground plane) while ΔSNR decreases with temperature consistently with expectation. This demonstrates that KI-TWPAs can be used in experiments that need to be performed at relatively high temperatures. The operability of KI-TWPAs in high magnetic field opens the door to a wide range of applications in spin qubits, spin ensembles, topological qubits, low-power NMR, and the search for axion dark matter.