Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2311.08482 · Physical Review Applied

High-resolution coincidence counting system for large-scale photonics applications

Josef Hloušek, Jan Grygar, Michal Dudka, Miroslav Ježek

Published Feb 12, 2024• 7 citations
arXivHTMLPDF

Abstract

The increasing complexity of recent photonic experiments challenges the development of efficient multichannel coincidence counting systems with high-level functionality. Here, we report a coincidence unit able to count detection events ranging from single to 16-fold coincidences with full channel-number resolution. The device operates within sub-100-ps coincidence time windows, with a maximum input frequency of 1.5 GHz and an overall jitter of less than 10 ps. The unit high-level timing performance renders it suitable for quantum photonic experiments employing low-timing-jitter single-photon detectors. Additionally, the unit can be used in complex photonic systems to drive feed-forward loops. We demonstrate the developed coincidence counting unit in photon-number-resolving detection to directly quantify the statistical properties of light, specifically coherent and thermal states, with a fidelity exceeding 0.999 up to 60 photons.

DOI
10.1103/physrevapplied.21.024023

Related papers

Fast and compact multichannel photon coincidence unit for quantum information processing

Sascha Gaertner, Harald Weinfurter, Christian Kurtsiefer

We present a fast and compact multichannel coincidence unit to count all possible single and coincidence detection events in an experiment with eight single-photon detectors at once. Using high-speed electronics and a microcontroller, this device is able to process up to 800000events∕s. The coincidence window can be tuned within a range of 4–12ns. The device can be easily scaled to any number of input channels and is thus ideally suited for efficient multiphoton quantum information processing.

Review of Scientific Instruments•Dec 1, 2005•25 citations

Time-tagged coincidence counting unit for large-scale photonic quantum computing

Wei Li, Yi Hu, Han-Sen Zhong +4 more

Real-time analysis of single-photon coincidence is critical in photonic quantum computing. The large channel number and high counting rate foreseen in such experiments pose a big challenge for the conventional time tagged method and coincidence instruments. Here we propose a real-time time-tagged coincidence method and a data filtering solution, demonstrated by a 32-channel coincidence counting unit that has been implemented successfully on a field-programmable gate array system. The unit provides high counting rates, a tunable coincidence window, and a timing resolution of 390 ps. Beyond that, it is feasible to be scaled up to 104 channels and is thus ideally suited for channel consuming applications such as boson sampling. Based on the versatility and scalability the unit has shown, we believe that it is the turn-key solution for many single-photon coincidence counting applications in photonic quantum computing.

Review of Scientific Instruments•Oct 1, 2018•9 citations

A Precise High Count-Rate FPGA Based Multi-Channel Coincidence Counting System for Quantum Photonics Applications

E. Arabul, Stefano Paesani, Scott Tancock +2 more

Coincidence counters play the role of gating events from the background noise in almost every quantum photonics setup. Precise multi-channel and high count-rate coincidence counting tools have become desirable due to an increase in the complexity of quantum photonics experiments. However, timing analyzers are struggling to meet these needs. We are proposing a Field Programmable Gate Array (FPGA) based coincidence counting system which provides 8 operational channels with 8.9 ps root mean square (RMS) resolution (with a bin width of 7.7 ps) and a count-rate of 320 million counts per second (MCPS) (with 40 MCPS per channel). We have successfully tested our design in different quantum photonics scenarios such as the detection of two-photon interference and pseudo-photon-number resolving detection of a coherent state of light where it has shown its capability of working beyond the saturation of detectors. Also, we have introduced a Dual Data Rate Registration TDC, which improved the linearity of the time tagging operation by using both clock edges without increasing the dead-time or using the space excessively. 1.2 LSB in max DNL error, 1.8 LSB in max INL error, 10 ps in FWHM and 3.2 ps in RMS resolution improvements were achieved.

IEEE photonics journal•Jan 22, 2020•17 citations

Superconducting coincidence photon detector with short timing jitter

Shigehito Miki, Shigeyuki Miyajima, Masahiro Yabuno +7 more

We demonstrate the operation of a coincidence photon detector with a short timing jitter consisting of two superconducting nanowire single photon detectors (SSPDs) and a single flux quantum (SFQ) circuit. By utilizing the timing discrimination capability of the SFQ coincidence circuit, the full width at half maximum timing jitter of the entire coincidence photon detector was evaluated as 32.3 ps, which is 36 ps less than that of the standard commercial time correlated single photon counting module, and the timing jitter of the SSPD was estimated as ∼15 ps. Owing to the short timing jitter characteristics, our coincidence photon detector could correctly capture the effect of pulse-width broadening by insertion of an optical bandpass filter. We have also demonstrated that our coincidence photon detection clearly shows Hong-Ou-Mandel interference with a weak coherent pulse. These results are a crucial step to realizing high timing resolution coincidence measurements, ushering in a technology for timing measurement based multi-photon quantum interference.

Applied Physics Letters•Jun 25, 2018•24 citations

Data acquisition system for fast multichannel coincidence photon counting

Hossein Kavianipour, C. Böhm, Mohamed Bourennane

In this paper we present the data acquisition (DAQ) system for a multichannel coincidence photon counter where this DAQ is optimized for a small coincidence window, high speed data retrieving without reduction and parallel data processing. For single photon detection we use Avalanche Photodiodes (APD) which are practical tools for detection in quantum optics and photonics quantum information experiments. However they introduce noise into the measurements originating from their dark count detection and after pulsing. One way to limit this contribution is to decrease the time window in which the coincidence detection measurement is performed. We have developed this DAQ based entirely on a standard Field Programmable Gate Array (FPGA) where the width of the coincidence time window is in the sub-nanosecond range. The same unit is also responsible for sending the result to the User Interface (UI). The communication between the UI and the FPGA platform is through a single link Peripheral Component Interconnect Express (PCIe) by means of streaming DMA. Our DAQ is developed for Xilinx Spartan-6 devices but other devices are also supported. A Linux driver with all necessary functionality to communicate with the DAQ as well as the UI is also developed. The use of our unit can be extended for other detection counting physical systems.

IEEE-NPSS Real-Time Conference•May 1, 2014•0 citations

Photon-number-resolution with sub-30-ps timing using multi-element superconducting nanowire single photon detectors

Eric A. Dauler, Andrew J. Kerman, Bryan S. Robinson +5 more

A photon-number-resolving detector based on a four-element superconducting nanowire single photon detector is demonstrated to have sub-30-ps resolution in measuring the arrival time of individual photons. This detector can be used to characterise the photon statistics of non-pulsed light sources and to mitigate dead-time effects in high-speed photon counting applications. Furthermore, a 25% system detection efficiency at 1550 nm was demonstrated, making the detector useful for both low-flux source characterization and high-speed photon counting and quantum communication applications. The design, fabrication, and testing of this detector are described, and a comparison between the measured and the theoretical performance is presented.

arXiv:0805.2397•Journal of Modern Optics•Jan 15, 2009•139 citations
The increasing complexity of recent photonic experiments challenges the development of efficient multichannel coincidence counting systems with high-level functionality. Here, we report a coincidence unit able to count detection events ranging from single to 16-fold coincidences with full channel-number resolution. The device operates within sub-100-ps coincidence time windows, with a maximum input frequency of 1.5 GHz and an overall jitter of less than 10 ps. The unit high-level timing performance renders it suitable for quantum photonic experiments employing low-timing-jitter single-photon detectors. Additionally, the unit can be used in complex photonic systems to drive feed-forward loops. We demonstrate the developed coincidence counting unit in photon-number-resolving detection to directly quantify the statistical properties of light, specifically coherent and thermal states, with a fidelity exceeding 0.999 up to 60 photons.
We present a fast and compact multichannel coincidence unit to count all possible single and coincidence detection events in an experiment with eight single-photon detectors at once. Using high-speed electronics and a microcontroller, this device is able to process up to 800000events∕s. The coincidence window can be tuned within a range of 4–12ns. The device can be easily scaled to any number of input channels and is thus ideally suited for efficient multiphoton quantum information processing.
Real-time analysis of single-photon coincidence is critical in photonic quantum computing. The large channel number and high counting rate foreseen in such experiments pose a big challenge for the conventional time tagged method and coincidence instruments. Here we propose a real-time time-tagged coincidence method and a data filtering solution, demonstrated by a 32-channel coincidence counting unit that has been implemented successfully on a field-programmable gate array system. The unit provides high counting rates, a tunable coincidence window, and a timing resolution of 390 ps. Beyond that, it is feasible to be scaled up to 104 channels and is thus ideally suited for channel consuming applications such as boson sampling. Based on the versatility and scalability the unit has shown, we believe that it is the turn-key solution for many single-photon coincidence counting applications in photonic quantum computing.
Coincidence counters play the role of gating events from the background noise in almost every quantum photonics setup. Precise multi-channel and high count-rate coincidence counting tools have become desirable due to an increase in the complexity of quantum photonics experiments. However, timing analyzers are struggling to meet these needs. We are proposing a Field Programmable Gate Array (FPGA) based coincidence counting system which provides 8 operational channels with 8.9 ps root mean square (RMS) resolution (with a bin width of 7.7 ps) and a count-rate of 320 million counts per second (MCPS) (with 40 MCPS per channel). We have successfully tested our design in different quantum photonics scenarios such as the detection of two-photon interference and pseudo-photon-number resolving detection of a coherent state of light where it has shown its capability of working beyond the saturation of detectors. Also, we have introduced a Dual Data Rate Registration TDC, which improved the linearity of the time tagging operation by using both clock edges without increasing the dead-time or using the space excessively. 1.2 LSB in max DNL error, 1.8 LSB in max INL error, 10 ps in FWHM and 3.2 ps in RMS resolution improvements were achieved.
We demonstrate the operation of a coincidence photon detector with a short timing jitter consisting of two superconducting nanowire single photon detectors (SSPDs) and a single flux quantum (SFQ) circuit. By utilizing the timing discrimination capability of the SFQ coincidence circuit, the full width at half maximum timing jitter of the entire coincidence photon detector was evaluated as 32.3 ps, which is 36 ps less than that of the standard commercial time correlated single photon counting module, and the timing jitter of the SSPD was estimated as ∼15 ps. Owing to the short timing jitter characteristics, our coincidence photon detector could correctly capture the effect of pulse-width broadening by insertion of an optical bandpass filter. We have also demonstrated that our coincidence photon detection clearly shows Hong-Ou-Mandel interference with a weak coherent pulse. These results are a crucial step to realizing high timing resolution coincidence measurements, ushering in a technology for timing measurement based multi-photon quantum interference.
In this paper we present the data acquisition (DAQ) system for a multichannel coincidence photon counter where this DAQ is optimized for a small coincidence window, high speed data retrieving without reduction and parallel data processing. For single photon detection we use Avalanche Photodiodes (APD) which are practical tools for detection in quantum optics and photonics quantum information experiments. However they introduce noise into the measurements originating from their dark count detection and after pulsing. One way to limit this contribution is to decrease the time window in which the coincidence detection measurement is performed. We have developed this DAQ based entirely on a standard Field Programmable Gate Array (FPGA) where the width of the coincidence time window is in the sub-nanosecond range. The same unit is also responsible for sending the result to the User Interface (UI). The communication between the UI and the FPGA platform is through a single link Peripheral Component Interconnect Express (PCIe) by means of streaming DMA. Our DAQ is developed for Xilinx Spartan-6 devices but other devices are also supported. A Linux driver with all necessary functionality to communicate with the DAQ as well as the UI is also developed. The use of our unit can be extended for other detection counting physical systems.
A photon-number-resolving detector based on a four-element superconducting nanowire single photon detector is demonstrated to have sub-30-ps resolution in measuring the arrival time of individual photons. This detector can be used to characterise the photon statistics of non-pulsed light sources and to mitigate dead-time effects in high-speed photon counting applications. Furthermore, a 25% system detection efficiency at 1550 nm was demonstrated, making the detector useful for both low-flux source characterization and high-speed photon counting and quantum communication applications. The design, fabrication, and testing of this detector are described, and a comparison between the measured and the theoretical performance is presented.