For quantum error correction codes the required number of measurement rounds typically increases with the code distance when measurements are faulty. Single-shot error correction allows for an error threshold with only one round of noisy syndrome measurements regardless of the code size. Here we implement single-shot check operators for toric codes. The single-shot checks are constructed by Gaussian elimination following Campbell [Campbell, Quantum Sci. Technol. 4, 025006 (2019)]. The single-shot check operators result in a sustainable threshold at 5.62% for an error model with noisy measurements, outperforming the conventional toric code-check operators with multiple rounds of noisy measurement. The cost of the transformation is nonlocal high-weight stabilizer generators. We then consider a gate-based error model that leads to increased measurement error with stabilizer weight. Here we find no single-shot threshold behavior and instead find the code family will have an optimal code size for a fixed error rate. For this error model the conventional check operators with multiple measurements yields a lower logical error rate.
For quantum error correction codes the required number of measurement rounds typically increases with the code distance when measurements are faulty. Single-shot error correction allows for an error threshold with only one round of noisy syndrome measurements regardless of the code size. Here we implement single-shot check operators for toric codes. The single-shot checks are constructed by Gaussian elimination following Campbell [Campbell, Quantum Sci. Technol. 4, 025006 (2019)]. The single-shot check operators result in a sustainable threshold at 5.62% for an error model with noisy measurements, outperforming the conventional toric code-check operators with multiple rounds of noisy measurement. The cost of the transformation is nonlocal high-weight stabilizer generators. We then consider a gate-based error model that leads to increased measurement error with stabilizer weight. Here we find no single-shot threshold behavior and instead find the code family will have an optimal code size for a fixed error rate. For this error model the conventional check operators with multiple measurements yields a lower logical error rate.
Quantum error correction typically requires repeated syndrome extraction due to measurement noise, which results in substantial time overhead in fault-tolerant computation. Single-shot error correction aims to suppress errors using only one round of syndrome extraction. However, for most codes, it requires high-weight checks, which significantly degrade, and often eliminate, single-shot performance at the circuit level. In this work, we introduce local single-shot checks, where we impose constraints on check weights. Using a dynamic measurement scheme, we show that the number of required measurement rounds can be reduced by a factor determined by this constraint. As an example, we show through numerical simulation that our scheme can improve decoding performance compared to conventional checks when using sliding-window decoding with a reduced window size under circuit-level noise models for toric codes. Our work provides a new direction for constructing checks that can reduce time overhead in large-scale fault-tolerant quantum computation.
In this work, we study the single-shot performance of higher-dimensional hypergraph product codes decoded using belief propagation and ordered-statistics decoding [P.Panteleev and G. Kalachev, Quantum 5, 585 (2021)].We find that decoding data-qubit and syndrome-measurement errors together in a single stage leads to single-shot thresholds that greatly exceed all previously observed single-shot thresholds for these codes.For the three-dimensional toric code and a phenomenological noise model, our results are consistent with a sustainable threshold of 7.1% for Z errors, compared to the threshold of 2.90% previously found using a two-stage decoder [Quintavalle et al., 2021].For the four-dimensional (4D) toric code, for which both X and Z error correction is single shot, our results are consistent with a sustainable single-shot threshold of 4.3%, which is even higher than the threshold of 2.93% for the two-dimensional toric code for the same noise model but using L rounds of stabilizer measurement.We also explore the performance of balanced-product and 4D hypergraph-product codes, which we show lead to a reduction in qubit overhead compared the surface code for phenomenological error rates as high as 1%.
Quantum computing platforms based on arrays of tweezer-confined neutral atoms have recently emerged as a competitive modality thanks to a direct path toward high qubit count, rapidly advancing operation fidelities, and their ability to execute circuits with arbitrary qubit connectivity. These features will enable the use of efficient error correction schemes with high encoding-rates, time-efficient decoding, and resource-efficient architectures based on transversal gates. With these goals in mind, recent state of the art neutral atom demonstrations focus on the transition from the use of physical qubits to error-corrected logical qubits, but to date there has been no demonstration of repeated error correction scalable to arbitrary depth. Here, we demonstrate many cycles of syndrome extraction in a toric quantum error correcting code, using mid-circuit measurement and replacement of lost qubits, including reloading of a qubit reservoir for indefinite coherent operation. We characterize the logical error rate after up to 90 cycles, showing that logical information can be preserved through multiple rounds of qubit reloading. Comparing two distances of the code up to 8 rounds of syndrome extraction shows a lower absolute logical error rate for the larger distance code.
Quantum stabilizer codes often struggle with syndrome errors due to measurement imperfections. Typically, multiple rounds of syndrome extraction are employed to ensure reliable error information. In this paper, we consider phenomenological decoding problems, where data qubit errors may occur between extractions, and each measurement can be faulty. We introduce generalized quantum data-syndrome codes along with a generalized check matrix that integrates both quaternary and binary alphabets to represent diverse error sources. This results in a Tanner graph with mixed variable nodes, enabling the design of belief propagation (BP) decoding algorithms that effectively handle phenomenological errors. Importantly, our BP decoders are applicable to general sparse quantum codes. Through simulations, we achieve an error threshold of more than 3% for quantum memory protected by rotated toric codes, using solely BP without post-processing. Our results indicate that d rounds of syndrome extraction are sufficient for a toric code of distance d. We observe that at high error rates, fewer rounds of syndrome extraction tend to perform better, while more rounds improve performance at lower error rates. Additionally, we propose a method to construct effective redundant stabilizer checks for single-shot error correction. Our simulations show that BP decoding remains highly effective even with a high syndrome error rate.
Abstract Fault-tolerant protocols and quantum error correction (QEC) are essential to building reliable quantum computers from imperfect components that are vulnerable to errors. Optimizing the resource and time overheads needed to implement QEC is one of the most pressing challenges. Here, we introduce a new topological quantum error-correcting code, the three-dimensional subsystem toric code (3D STC). The 3D STC can be realized with geometrically-local parity checks of weight at most three on the cubic lattice with open boundary conditions. We prove that one round of parity-check measurements suffices to perform reliable QEC with the 3D STC even in the presence of measurement errors. We also propose an efficient single-shot QEC decoding strategy for the 3D STC and numerically estimate the resulting storage threshold against independent bit-flip, phase-flip and measurement errors to bepSTC ≈ 1.045%. Such a high threshold together with local parity-check measurements make the 3D STC particularly appealing for realizing fault-tolerant quantum computing.
Color codes are promising quantum error-correction (QEC) codes because they have an advantage over surface codes in that all Clifford gates can be implemented transversally. However, the thresholds of color codes under circuit-level noise are relatively low, mainly because measurements of their high-weight stabilizer generators cause an increase in the circuit depth and, thus, substantial errors are introduced. This makes color codes not the best candidate for fault-tolerant quantum computing. Here, we propose a method to suppress the impact of such errors by optimizing weights of decoders using conditional error probabilities conditioned on the measurement outcomes of flag qubits. In numerical simulations, we improve the threshold of the (4.8.8) color code under circuit-level noise from 0.14% to around 0.27%, which is calculated by using an integer programming decoder. Furthermore, in the (6.6.6) color code, we achieve a circuit-level threshold of around 0.36%, which is almost the same value as the highest value in the previous studies employing the same noise model. In both cases, the effective code distance is also improved compared to a conventional method that uses a single ancilla qubit for each stabilizer measurement. Thereby, the achieved logical error rates at low physical error rates are almost one order of magnitude lower than those of the conventional method with the same code distance. Even when compared to the single-ancilla method with a higher code distance, considering the increased number of qubits used in our method, we achieve lower logical error rates in most cases. This method can also be applied to other weight-based decoders, making the color codes more promising as candidates for the experimental implementation of QEC. Furthermore, one can utilize this approach to improve a threshold of wider classes of QEC codes, such as high-rate quantum low-density parity-check codes. Published by the American Physical Society 2024