Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2310.12965

Pre-optimizing variational quantum eigensolvers with tensor networks

Abid Khan, Bryan K. Clark, Norm M. Tubman

Published Oct 19, 2023• 10 citations
arXivHTMLPDF

Abstract

The variational quantum eigensolver (VQE) is a promising algorithm for demonstrating quantum advantage in the noisy intermediate-scale quantum (NISQ) era. However, optimizing VQE from random initial starting parameters is challenging due to a variety of issues including barren plateaus, optimization in the presence of noise, and slow convergence. While simulating quantum circuits classically is generically difficult, classical computing methods have been developed extensively, and powerful tools now exist to approximately simulate quantum circuits. This opens up various strategies that limit the amount of optimization that needs to be performed on quantum hardware. Here we present and benchmark an approach where we find good starting parameters for parameterized quantum circuits by classically simulating VQE by approximating the parameterized quantum circuit (PQC) as a matrix product state (MPS) with a limited bond dimension. Calling this approach the variational tensor network eigensolver (VTNE), we apply it to the 1D and 2D Fermi-Hubbard model with system sizes that use up to 32 qubits. We find that in 1D, VTNE can find parameters for PQC whose energy error is within 0.5% relative to the ground state. In 2D, the parameters that VTNE finds have significantly lower energy than their starting configurations, and we show that starting VQE from these parameters requires non-trivially fewer operations to come down to a given energy. The higher the bond dimension we use in VTNE, the less work needs to be done in VQE. By generating classically optimized parameters as the initialization for the quantum circuit one can alleviate many of the challenges that plague VQE on quantum computers.

DOI
10.48550/arxiv.2310.12965

Related papers

A joint optimization approach of parameterized quantum circuits with a tensor network

Clara Ferreira Cores, Kaur Kristjuhan, Mark Jones

Despite the advantage quantum computers are expected to deliver when performing simulations compared to their classical counterparts, the current noisy intermediate-scale quantum (NISQ) devices remain limited in their capabilities. The training of parameterized quantum circuits (PQCs) remains a significant practical challenge, exacerbated by the requirement of shallow circuit depth necessary for their hardware implementation. Hybrid methods employing classical computers alongside quantum devices, such as the Variational Quantum Eigensolver (VQE), have proven useful for analyzing the capabilities of NISQ devices to solve relevant optimization problems. Still, in the simulation of complex structures involving the many-body problem in quantum mechanics, major issues remain about the representation of the system and obtaining results which clearly outperform classical computational devices. In this research contribution we propose the use of parameterized Tensor Networks (TNs) to attempt an improved performance of the VQE algorithm. A joint approach is presented where the Hamiltonian of a system is encapsulated into a Matrix Product Operator (MPO) within a parameterized unitary TN hereby splitting up the optimization task between the TN and the VQE. We show that the hybrid TN-VQE implementation improves the convergence of the algorithm in comparison to optimizing randomly-initialized quantum circuits via VQE.

arXiv:2402.12105•Feb 19, 2024•0 citations

Pre-optimization of quantum circuits, barren plateaus and classical simulability: tensor networks to unlock the variational quantum eigensolver

Baptiste Anselme Martin, Thomas Ayral

Variational quantum algorithms are practical approaches to prepare ground states, but their potential for quantum advantage remains unclear. Here, we use differentiable 2D tensor networks (TN) to optimize parameterized quantum circuits that prepare the ground state of the transverse field Ising model (TFIM). Our method enables the preparation of states with high energy accuracy, even for large systems beyond 1D. We show that TN pre-optimization can mitigate the barren plateau issue by giving access to enhanced gradient zones that do not shrink exponentially with system size. We evaluate the classical simulation cost evaluating energies at these warm-starts, and identify regimes where quantum hardware offers better scaling than TN simulations.

quant-pharXiv:2602.04676•Feb 5, 2026•0 citations

Enhancing computational accuracy with parallel parameter optimization in variational quantum eigensolver

Daisuke Tsukayama, Jun‐ichi Shirakashi, Tetsuo Shibuya +1 more

Variational quantum algorithms have promising applications in noisy intermediate-scale quantum (NISQ) devices. These algorithms rely on a classical optimization outer loop that minimizes a parameterized quantum circuit function. The optimization in variational quantum eigensolver (VQE) is NP-hard, meaning that finding the optimal solution is infeasible in the worst-case scenario. One way to address this challenge is through parallel optimization of parameters using multiple-parameterized quantum circuits. However, this approach is unsuitable for cloud-based quantum processing unit utilization due to the increased number of quantum circuit executions. Although NISQ devices have limitations in terms of gate depth, their size has been growing in recent years. Therefore, implementing multiple-parameterized quantum circuits in NISQ devices can suppress the increase in the number of executions. In this study, we propose a parallel-VQE, which leverages the parallel execution of parameterized quantum circuits to perform parallel parameter optimization in VQE, achieving convergence to solutions closer to the ground state. We validate the effectiveness of parallel-VQE in solving the random weighted max-cut problem using numerical simulations and a real quantum device. We present the results of running up to six circuits in parallel (120 qubits) and demonstrate the advantages of using multiple units to improve computational accuracy. This study provides a potential method for solving eigenvalue problems and combinatorial optimization problems for future quantum devices.

AIP Advances•Jan 1, 2025•8 citations

Scalable Tensor Ring Methods for Variational Quantum Algorithms

Dheeraj Peddireddy

Variational quantum algorithms (VQAs) have emerged as a promising candidate for realizing quantum advantage in machine learning and optimization tasks on noisy intermediate-scale quantum (NISQ) devices. Despite significant theoretical promise, the practical impact of VQAs is constrained by the exponential growth in computational resources required for classical simulation, the onset of barren plateaus in parameterized landscapes, and the inherent difficulties of scaling classical optimization routines to circuits with many qubits and layers. Addressing these intertwined challenges is essential for both advancing quantum algorithm development and extracting actionable physical insights from modern quantum hardware.This dissertation develops, analyzes, and validates an efficient framework based on approximate tensor ring decompositions for the classical simulation, training, and benchmarking of variational quantum circuits and eigensolvers. The first component of this work formalizes the representation of quantum states and gates within a cyclic tensor ring structure, enabling the compression of parameterized quantum circuits to linear scaling in both qubit number and circuit depth, while preserving essential quantum correlations and entanglement structure. Gate operations are efficiently approximated via truncated singular value decomposition, and novel algorithms for forward propagation and gradient-based training in the tensor ring domain are developed. These methodological advances are systematically benchmarked on standard supervised learning tasks, including Iris and MNIST datasets, and compared to conventional statevector and matrix product state baselines, resulting in competitive accuracy and orders-of-magnitude reductions in simulation cost. Extending this framework, the dissertation also introduces a scalable method for gradient evaluation in variational quantum eigensolvers (VQE) using the approximate tensor ring representation. This approach enables the simulation and training of large circuits for combinatorial optimization problems, supporting practical qubit counts and circuit depths inaccessible to traditional simulation methods. Detailed experiments on the Maximum-Cut optimization problem demonstrate both the computational efficiency and robustness of the tensor ring framework in nontrivial optimization landscapes.Collectively, the results establish approximate tensor ring decomposition as a versatile and powerful framework for advancing quantum machine learning and discrete optimization, supporting both pre-deployment benchmarking on classical hardware and algorithm design for next-generation quantum devices. This work provides a foundation for the further exploration of scalable quantum-classical hybrid algorithms, with implications for quantum simulation, optimization, and beyond.

•Jan 20, 2026•0 citations

Optimal parameter configurations for sequential optimization of the variational quantum eigensolver

Katsuhiro Endo, Yuki Sato, Rudy Raymond +3 more

The variational quantum eigensolver (VQE) is a hybrid algorithm to find the minimum eigenvalue/vector of the given Hamiltonian by optimizing a parameterized quantum circuit (PQC) using a classical computer. Sequential optimization methods, which are often used in quantum circuit tensor networks, are popular for optimizing the parameterized gates of PQCs. In this paper, we focus on the case where the components to be optimized are single-qubit gates, in which the analytic optimization of a single-qubit gate is sequentially performed. The analytical solution is given by diagonalization of a matrix whose elements are computed from the expectation values of observables specified by a set of predetermined parameters, which we refer to as the parameter configurations. In this paper, we first show that the optimization accuracy significantly depends on the choice of parameter configurations owing to the statistical errors in the expectation values. We then identify a metric that quantifies the optimization accuracy of a parameter configuration for all possible statistical errors, named configuration overhead/cost or C-cost. We theoretically provide the lower bound of C-cost and show that, for the minimum size of parameter configurations, the lower bound is achieved if and only if the parameter configuration satisfies the so-called equiangular line condition. Finally, we provide numerical experiments demonstrating that the optimal parameter configuration exhibits the best result in several VQE problems. We hope that this general statistical methodology will enhance the efficacy of sequential optimization of PQCs for solving practical problems with near-term quantum devices.

arXiv:2303.07082•Physical Review Research•Nov 9, 2023•7 citations

Noisy Tensor Ring approximation for computing gradients of Variational Quantum Eigensolver for Combinatorial Optimization

Dheeraj Peddireddy, Utkarsh Priyam, Vaneet Aggarwal

Variational Quantum algorithms, especially Quantum Approximate Optimization and Variational Quantum Eigensolver (VQE) have established their potential to provide computational advantage in the realm of combinatorial optimization. However, these algorithms suffer from classically intractable gradients limiting the scalability. This work addresses the scalability challenge for VQE by proposing a classical gradient computation method which utilizes the parameter shift rule but computes the expected values from the circuits using a tensor ring approximation. The parametrized gates from the circuit transform the tensor ring by contracting the matrix along the free edges of the tensor ring. While the single qubit gates do not alter the ring structure, the state transformations from the two qubit rotations are evaluated by truncating the singular values thereby preserving the structure of the tensor ring and reducing the computational complexity. This variation of the Matrix product state approximation grows linearly in number of qubits and the number of two qubit gates as opposed to the exponential growth in the classical simulations, allowing for a faster evaluation of the gradients on classical simulators.

arXiv:2307.03884•Jul 8, 2023•0 citations
The variational quantum eigensolver (VQE) is a promising algorithm for demonstrating quantum advantage in the noisy intermediate-scale quantum (NISQ) era. However, optimizing VQE from random initial starting parameters is challenging due to a variety of issues including barren plateaus, optimization in the presence of noise, and slow convergence. While simulating quantum circuits classically is generically difficult, classical computing methods have been developed extensively, and powerful tools now exist to approximately simulate quantum circuits. This opens up various strategies that limit the amount of optimization that needs to be performed on quantum hardware. Here we present and benchmark an approach where we find good starting parameters for parameterized quantum circuits by classically simulating VQE by approximating the parameterized quantum circuit (PQC) as a matrix product state (MPS) with a limited bond dimension. Calling this approach the variational tensor network eigensolver (VTNE), we apply it to the 1D and 2D Fermi-Hubbard model with system sizes that use up to 32 qubits. We find that in 1D, VTNE can find parameters for PQC whose energy error is within 0.5% relative to the ground state. In 2D, the parameters that VTNE finds have significantly lower energy than their starting configurations, and we show that starting VQE from these parameters requires non-trivially fewer operations to come down to a given energy. The higher the bond dimension we use in VTNE, the less work needs to be done in VQE. By generating classically optimized parameters as the initialization for the quantum circuit one can alleviate many of the challenges that plague VQE on quantum computers.
Despite the advantage quantum computers are expected to deliver when performing simulations compared to their classical counterparts, the current noisy intermediate-scale quantum (NISQ) devices remain limited in their capabilities. The training of parameterized quantum circuits (PQCs) remains a significant practical challenge, exacerbated by the requirement of shallow circuit depth necessary for their hardware implementation. Hybrid methods employing classical computers alongside quantum devices, such as the Variational Quantum Eigensolver (VQE), have proven useful for analyzing the capabilities of NISQ devices to solve relevant optimization problems. Still, in the simulation of complex structures involving the many-body problem in quantum mechanics, major issues remain about the representation of the system and obtaining results which clearly outperform classical computational devices. In this research contribution we propose the use of parameterized Tensor Networks (TNs) to attempt an improved performance of the VQE algorithm. A joint approach is presented where the Hamiltonian of a system is encapsulated into a Matrix Product Operator (MPO) within a parameterized unitary TN hereby splitting up the optimization task between the TN and the VQE. We show that the hybrid TN-VQE implementation improves the convergence of the algorithm in comparison to optimizing randomly-initialized quantum circuits via VQE.
Variational quantum algorithms are practical approaches to prepare ground states, but their potential for quantum advantage remains unclear. Here, we use differentiable 2D tensor networks (TN) to optimize parameterized quantum circuits that prepare the ground state of the transverse field Ising model (TFIM). Our method enables the preparation of states with high energy accuracy, even for large systems beyond 1D. We show that TN pre-optimization can mitigate the barren plateau issue by giving access to enhanced gradient zones that do not shrink exponentially with system size. We evaluate the classical simulation cost evaluating energies at these warm-starts, and identify regimes where quantum hardware offers better scaling than TN simulations.
Variational quantum algorithms have promising applications in noisy intermediate-scale quantum (NISQ) devices. These algorithms rely on a classical optimization outer loop that minimizes a parameterized quantum circuit function. The optimization in variational quantum eigensolver (VQE) is NP-hard, meaning that finding the optimal solution is infeasible in the worst-case scenario. One way to address this challenge is through parallel optimization of parameters using multiple-parameterized quantum circuits. However, this approach is unsuitable for cloud-based quantum processing unit utilization due to the increased number of quantum circuit executions. Although NISQ devices have limitations in terms of gate depth, their size has been growing in recent years. Therefore, implementing multiple-parameterized quantum circuits in NISQ devices can suppress the increase in the number of executions. In this study, we propose a parallel-VQE, which leverages the parallel execution of parameterized quantum circuits to perform parallel parameter optimization in VQE, achieving convergence to solutions closer to the ground state. We validate the effectiveness of parallel-VQE in solving the random weighted max-cut problem using numerical simulations and a real quantum device. We present the results of running up to six circuits in parallel (120 qubits) and demonstrate the advantages of using multiple units to improve computational accuracy. This study provides a potential method for solving eigenvalue problems and combinatorial optimization problems for future quantum devices.
Variational quantum algorithms (VQAs) have emerged as a promising candidate for realizing quantum advantage in machine learning and optimization tasks on noisy intermediate-scale quantum (NISQ) devices. Despite significant theoretical promise, the practical impact of VQAs is constrained by the exponential growth in computational resources required for classical simulation, the onset of barren plateaus in parameterized landscapes, and the inherent difficulties of scaling classical optimization routines to circuits with many qubits and layers. Addressing these intertwined challenges is essential for both advancing quantum algorithm development and extracting actionable physical insights from modern quantum hardware.This dissertation develops, analyzes, and validates an efficient framework based on approximate tensor ring decompositions for the classical simulation, training, and benchmarking of variational quantum circuits and eigensolvers. The first component of this work formalizes the representation of quantum states and gates within a cyclic tensor ring structure, enabling the compression of parameterized quantum circuits to linear scaling in both qubit number and circuit depth, while preserving essential quantum correlations and entanglement structure. Gate operations are efficiently approximated via truncated singular value decomposition, and novel algorithms for forward propagation and gradient-based training in the tensor ring domain are developed. These methodological advances are systematically benchmarked on standard supervised learning tasks, including Iris and MNIST datasets, and compared to conventional statevector and matrix product state baselines, resulting in competitive accuracy and orders-of-magnitude reductions in simulation cost. Extending this framework, the dissertation also introduces a scalable method for gradient evaluation in variational quantum eigensolvers (VQE) using the approximate tensor ring representation. This approach enables the simulation and training of large circuits for combinatorial optimization problems, supporting practical qubit counts and circuit depths inaccessible to traditional simulation methods. Detailed experiments on the Maximum-Cut optimization problem demonstrate both the computational efficiency and robustness of the tensor ring framework in nontrivial optimization landscapes.Collectively, the results establish approximate tensor ring decomposition as a versatile and powerful framework for advancing quantum machine learning and discrete optimization, supporting both pre-deployment benchmarking on classical hardware and algorithm design for next-generation quantum devices. This work provides a foundation for the further exploration of scalable quantum-classical hybrid algorithms, with implications for quantum simulation, optimization, and beyond.
The variational quantum eigensolver (VQE) is a hybrid algorithm to find the minimum eigenvalue/vector of the given Hamiltonian by optimizing a parameterized quantum circuit (PQC) using a classical computer. Sequential optimization methods, which are often used in quantum circuit tensor networks, are popular for optimizing the parameterized gates of PQCs. In this paper, we focus on the case where the components to be optimized are single-qubit gates, in which the analytic optimization of a single-qubit gate is sequentially performed. The analytical solution is given by diagonalization of a matrix whose elements are computed from the expectation values of observables specified by a set of predetermined parameters, which we refer to as the parameter configurations. In this paper, we first show that the optimization accuracy significantly depends on the choice of parameter configurations owing to the statistical errors in the expectation values. We then identify a metric that quantifies the optimization accuracy of a parameter configuration for all possible statistical errors, named configuration overhead/cost or C-cost. We theoretically provide the lower bound of C-cost and show that, for the minimum size of parameter configurations, the lower bound is achieved if and only if the parameter configuration satisfies the so-called equiangular line condition. Finally, we provide numerical experiments demonstrating that the optimal parameter configuration exhibits the best result in several VQE problems. We hope that this general statistical methodology will enhance the efficacy of sequential optimization of PQCs for solving practical problems with near-term quantum devices.
Variational Quantum algorithms, especially Quantum Approximate Optimization and Variational Quantum Eigensolver (VQE) have established their potential to provide computational advantage in the realm of combinatorial optimization. However, these algorithms suffer from classically intractable gradients limiting the scalability. This work addresses the scalability challenge for VQE by proposing a classical gradient computation method which utilizes the parameter shift rule but computes the expected values from the circuits using a tensor ring approximation. The parametrized gates from the circuit transform the tensor ring by contracting the matrix along the free edges of the tensor ring. While the single qubit gates do not alter the ring structure, the state transformations from the two qubit rotations are evaluated by truncating the singular values thereby preserving the structure of the tensor ring and reducing the computational complexity. This variation of the Matrix product state approximation grows linearly in number of qubits and the number of two qubit gates as opposed to the exponential growth in the classical simulations, allowing for a faster evaluation of the gradients on classical simulators.