© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

arXiv:2310.12471 · Physical Review Applied

Electrical trace analysis of superconducting nanowire photon-number-resolving detectors

Timon Schapeler, Niklas Lamberty, Thomas Hummel, Fabian Schlue, Michael Stefszky, Benjamin Brecht, Christine Silberhorn, Tim J. Bartley

Published Jul 10, 2024• 25 citations

Abstract

We apply principal component analysis (PCA) to a set of electrical output signals from a commercially available superconducting nanowire single-photon detector (SNSPD) to investigate their photon-number-resolving capability. We find that the rising edge as well as the amplitude of the electrical signal have the most dependence on photon number. Accurately measuring the rising edge while simultaneously measuring the voltage of the pulse amplitude maximizes the photon-number resolution of SNSPDs. Using an optimal basis of principal components, we show unambiguous discrimination between one- and two-photon events, as well as partial resolution up to five photons. This expands the use case of SNSPDs to photon-counting experiments, without the need of detector multiplexing architectures. Published by the American Physical Society 2024

DOI: 10.1103/physrevapplied.22.014024

Related papers

Extracting Photon-Number Information from Superconducting Nanowire Single-Photon Detectors Traces via Mean-Derivative Projection

I. S. Kuijf, F. B. Baalbergen, L. Seldenthuis +2 more

Photon-number resolved detection with superconducting nanowire single-photon detectors (SNSPDs) attracts increasing interest, but lacks a systematic framework for interpreting and benchmarking this capability. In this work, we combine principal component analysis (PCA) with a new readout technique to explore the photon-number resolving capabilities of SNSPDs and find that the information of the photon number is contained in a single principal component which approximates the time derivative of the average response trace. We introduce a new confidence metric based on the Bhattacharyya coefficient to quantify the photon-number-resolving capabilities of a detector system and show that this metric can be used to compare different systems. Our analysis and interpretation of the principal components imply that photon-number resolution in SNSPDs can be achieved with moderate hardware requirements in terms of both sample rate (5 GSample/sec) and analog bandwidth (3 GHz) and could be implemented in an FPGA, giving a highly scalable solution for real-time photon counting.

quant-pharXiv:2511.13475•APS Open Science•Nov 18, 2025•0 citations

Improving and Benchmarking Photon-Number-Resolving Capabilities of Superconducting Nanowire Detectors

Gregor Sauer, Mirco Kolarczik, Oskar Kohout +3 more

We show how ultra-high-resolution timing measurements of the rising and falling edges of electrical pulses generated from conventional superconducting nanowire detectors enable to distinguish photon numbers of up to 9 in a single-shot measurement.

Quantum 2.0 Conference and Exhibition•Jan 1, 2024•0 citations

Improving Photon Number Resolution in Superconducting Nanowire Single-Photon Detectors with Integrated Impedance Tapers

Bladimiro E. Valbuena, Daniel F. Santavicca

Simulations are run to optimize the ability to resolve the number of photons detected from the pulse height by a Superconducting Nanowire Single-Photon Detector (SNSPD). This is set up in a manner that features an impedance-matching transmission line taper that provides a characteristic impedance which transitions from kΩ to 50 Ω, with the taper providing an effective load impedance that outputs pulses with not only larger amplitudes but also showed a distinct separation for multi-photon events. The first part of this project tries to computationally match the experimental results obtained by our collaborators at MIT. Once these results are achieved, we try to modify the device geometry to improve the key detector metrics which include timing jitter, dark count rate, reset time, and overall detection efficiency.

•Jan 1, 2020•0 citations

Spatially Resolved Superconducting Nanowire Single Photon Detector Rise-Time Analysis

Claire E. Marvinney, Brian Lerner, Alexander A. Puretzky +2 more

We explore spatial and photon-number resolution in superconducting nanowire single photon detectors through measurements of the rising edge of the readout pulse.

OSA Quantum 2.0 Conference•Jan 1, 2020•0 citations

Photon-Number Resolution in Conventional Superconducting Nanowire Single-Photon Detectors: Theoretical Predictions

Kathryn L. Nicolich, Clinton Cahall, Nurul T. Islam +3 more

We demonstrate theoretically that a conventional single-pixel superconducting nanowire single-photon detector can resolve photon number by sensing changes in the rising edge of the electrical readout pulse.

Conference on Lasers and Electro-Optics•Jan 1, 2018•0 citations

Photon number resolving detection in commercially produced SNSPDs

Timothy M. Rambo, Jeremy S. Doredla, Hudson Jones +3 more

Many quantum applications will benefit significantly from photon number resolving detection. However, photon number resolving detectors have been largely experimental devices implemented in laboratory settings. Recent advances in superconducting nanowire device fabrication and readout techniques have enabled the implementation of photon number resolution in widely deployable commercial single-photon detection systems. We will discuss progress in implementing photon number resolved detection with commercially produced superconducting nanowire single photon detectors via spatial multiplexing of independently instrumented detector elements and photon number dependent rise-time changes in single-element nanowire devices.

Quantum Computing, Communication, and Simulation•Mar 12, 2024•0 citations

We apply principal component analysis (PCA) to a set of electrical output signals from a commercially available superconducting nanowire single-photon detector (SNSPD) to investigate their photon-number-resolving capability. We find that the rising edge as well as the amplitude of the electrical signal have the most dependence on photon number. Accurately measuring the rising edge while simultaneously measuring the voltage of the pulse amplitude maximizes the photon-number resolution of SNSPDs. Using an optimal basis of principal components, we show unambiguous discrimination between one- and two-photon events, as well as partial resolution up to five photons. This expands the use case of SNSPDs to photon-counting experiments, without the need of detector multiplexing architectures. Published by the American Physical Society 2024

Photon-number resolved detection with superconducting nanowire single-photon detectors (SNSPDs) attracts increasing interest, but lacks a systematic framework for interpreting and benchmarking this capability. In this work, we combine principal component analysis (PCA) with a new readout technique to explore the photon-number resolving capabilities of SNSPDs and find that the information of the photon number is contained in a single principal component which approximates the time derivative of the average response trace. We introduce a new confidence metric based on the Bhattacharyya coefficient to quantify the photon-number-resolving capabilities of a detector system and show that this metric can be used to compare different systems. Our analysis and interpretation of the principal components imply that photon-number resolution in SNSPDs can be achieved with moderate hardware requirements in terms of both sample rate (5 GSample/sec) and analog bandwidth (3 GHz) and could be implemented in an FPGA, giving a highly scalable solution for real-time photon counting.

Simulations are run to optimize the ability to resolve the number of photons detected from the pulse height by a Superconducting Nanowire Single-Photon Detector (SNSPD). This is set up in a manner that features an impedance-matching transmission line taper that provides a characteristic impedance which transitions from kΩ to 50 Ω, with the taper providing an effective load impedance that outputs pulses with not only larger amplitudes but also showed a distinct separation for multi-photon events. The first part of this project tries to computationally match the experimental results obtained by our collaborators at MIT. Once these results are achieved, we try to modify the device geometry to improve the key detector metrics which include timing jitter, dark count rate, reset time, and overall detection efficiency.

Many quantum applications will benefit significantly from photon number resolving detection. However, photon number resolving detectors have been largely experimental devices implemented in laboratory settings. Recent advances in superconducting nanowire device fabrication and readout techniques have enabled the implementation of photon number resolution in widely deployable commercial single-photon detection systems. We will discuss progress in implementing photon number resolved detection with commercially produced superconducting nanowire single photon detectors via spatial multiplexing of independently instrumented detector elements and photon number dependent rise-time changes in single-element nanowire devices.