Decoding algorithms based on approximate tensor-network (TN) contraction have proven tremendously successful in decoding two-dimensional (2D) local quantum codes such as toric or surface codes and color codes, effectively achieving optimal decoding accuracy. In this work, we introduce several techniques to generalize TN decoding to higher dimensions so that it can be applied to three-dimensional (3D) codes as well as 2D codes with noisy syndrome measurements (phenomenological noise or circuit-level noise). The 3D case is significantly more challenging than 2D, as the involved approximate tensor contraction is dramatically less well behaved than its 2D counterpart. Nonetheless, we numerically demonstrate that the decoding accuracy of our approach outperforms state-of-the-art decoders on the 3D surface code, both in the point and loop sectors, as well as for depolarizing noise. Our techniques could prove useful in near-term experimental demonstrations of quantum error correction, when decoding is to be performed off line and accuracy is of the utmost importance. To this end, we show how TN decoding can be applied to circuit-level noise and demonstrate that it outperforms the matching decoder on the rotated surface code. Published by the American Physical Society 2024
Decoding algorithms based on approximate tensor-network (TN) contraction have proven tremendously successful in decoding two-dimensional (2D) local quantum codes such as toric or surface codes and color codes, effectively achieving optimal decoding accuracy. In this work, we introduce several techniques to generalize TN decoding to higher dimensions so that it can be applied to three-dimensional (3D) codes as well as 2D codes with noisy syndrome measurements (phenomenological noise or circuit-level noise). The 3D case is significantly more challenging than 2D, as the involved approximate tensor contraction is dramatically less well behaved than its 2D counterpart. Nonetheless, we numerically demonstrate that the decoding accuracy of our approach outperforms state-of-the-art decoders on the 3D surface code, both in the point and loop sectors, as well as for depolarizing noise. Our techniques could prove useful in near-term experimental demonstrations of quantum error correction, when decoding is to be performed off line and accuracy is of the utmost importance. To this end, we show how TN decoding can be applied to circuit-level noise and demonstrate that it outperforms the matching decoder on the rotated surface code. Published by the American Physical Society 2024
In this work we develop a general tensor network decoder for 2D codes. Specifically, we propose a decoder that approximates maximally likelihood decoding for 2D stabiliser and subsystem codes subject to Pauli noise. For a code consisting of n qubits our decoder has a runtime of O(nlogn+nχ3), where χ is an approximation parameter. We numerically demonstrate the power of this decoder by studying four classes of codes under three noise models, namely regular surface codes, irregular surface codes, subsystem surface codes and colour codes, under bit-flip, phase-flip and depolarising noise. We show that the thresholds yielded by our decoder are state-of-the-art, and numerically consistent with optimal thresholds where available, suggesting that the tensor network decoder well approximates optimal decoding in all these cases. Novel to our decoder is an efficient and effective approximate contraction scheme for arbitrary 2D tensor networks, which may be of independent interest. We have also released an implementation of this algorithm as a stand-alone Julia package: SweepContractor.jl.
Abstract Tensor-network codes enable the construction of large stabilizer codes out of tensors describing smaller stabilizer codes. An application of tensor-network codes was an efficient and exact decoder for holographic codes. Here, we show how to write some topological codes, including the surface code and colour code, as simple tensor-network codes. We also show how to calculate distances of stabilizer codes by contracting a tensor network. The algorithm actually gives more information, including a histogram of all logical coset weights. We prove that this method is efficient in the case of stabilizer codes encoded via local log-depth circuits in one dimension and holographic codes. Using our tensor-network distance calculator, we find a modification of the rotated surface code that has the same distance but fewer minimum-weight logical operators by ‘doping’ the tensor network, i.e., we break the homogeneity of the tensor network by locally replacing tensors. For this example, this corresponds to an improvement in successful error correction of almost 2% against depolarizing noise (in the perfect-measurement setting), but comes at the cost of introducing three higher-weight stabilizers. Our general construction lets us pick a network geometry (e.g., a Euclidean lattice in the case of the surface code), and, using only a small set of seed codes (constituent tensors), build extensive codes with the potential for optimisation.
The maximum likelihood decoder based on tensor networks has proven highly successful for the 2D surface code, achieving the optimal decoding success rate. However, existing tensor network decoders are typically designed for independent single-qubit error models, and their performance under inter-qubit correlated error models remains unexplored. This is due to two major challenges. The first challenge lies in constructing the tensor network for correlated errors, since the same final Pauli error can arise from many different combinations of independent and correlated errors, preventing a direct factorization of the error probability. The second challenge is that even after a tensor network is constructed, it generally contains huge-dimensional tensors and is therefore not efficiently contractible. In this work, to address the first difficulty, we introduce additional binary indices and two transformations to construct a multi-index tensor network for maximum-likelihood decoding with correlated errors. To address the second difficulty, we use reparametrization, elimination, and index classification to decompose the huge-dimensional tensors into lower-dimensional tensors. This yields an efficiently contractible tensor network for error models satisfying the tractability conditions derived in this work. We perform numerical simulations for a representative correlated error model and show that the maximum-likelihood decoder implemented with our multi-index tensor network construction achieves a higher finite-size threshold than the widely used MWPM decoder.
Quantum error correction is essential to achieve fault-tolerant quantum computation in the presence of noisy qubits. Among the most promising approaches to quantum error correction is the surface code, thanks to a scalable two-dimensional architecture, only nearest-neighbor interactions, and a high error threshold. Decoding the surface code, i.e. finding the most likely error chain given a syndrome measurement outcome is a computationally complex task. Traditional decoders rely on classical algorithms, which, especially for larger systems, can be slow and may not always converge to the optimal solution. This thesis presents a novel approach to decoding the surface code using graph neural networks. By mapping the syndrome measurements to a graph and performing graph classification, we find that the graph neural networks can predict the most likely error configuration with high accuracy. Our results show that the GNN-based decoder outperforms the classic minimum weight perfect matching (MWPM) decoder in terms of accuracy. With a phenomenological noise model with depolarizing noise and perfect syndrome measurements, our networks beat MWPM up to code-size 15 across all relevant error rates. Furthermore, the GNN is capable of surpassing MWPM under circuit-level noise up to code size 7. We also show that training the network on repetition code data from a recent experiment [Google Quantum AI, Nature 614, 676 (2023)] produces per-step error rates comparable to those achieved with a matching decoder specifically adapted to the error rates of the physical qubits. This indicates that graph neural network decoders are capable of learning the underlying error distribution on the qubits. Our findings advance the field of quantum error correction and provide a promising new direction for the development of efficient decoding algorithms.
We present a new decoder for the surface code, which combines the accuracy of the tensor-network decoders with the efficiency and parallelism of the belief-propagation algorithm. Our main idea is to replace the expensive tensor-network contraction step in the tensor-network decoders with the algorithm—a recent approximate contraction algorithm, based on belief propagation. Our decoder is therefore a belief-propagation decoder that works in the degenerate maximal likelihood decoding framework. Unlike conventional tensor-network decoders, our algorithm can run efficiently in parallel, and may therefore be suitable for real-time decoding. We numerically test our decoder and show that for a large range of lattice sizes and noise levels it delivers a logical error probability that outperforms the Minimal Weight Perfect Matching decoder, sometimes by more than an order of magnitude.
Abstract There has been a rise in decoding quantum error correction codes with neural network–based decoders, due to the good decoding performance achieved and adaptability to any noise model. However, the main challenge is scalability to larger code distances due to an exponential increase of the error syndrome space. Note that successfully decoding the surface code under realistic noise assumptions will limit the size of the code to less than 100 qubits with current neural network–based decoders. Such a problem can be tackled by a distributed way of decoding, similar to the renormalization group (RG) decoders. In this paper, we introduce a decoding algorithm that combines the concept of RG decoding and neural network–based decoders. We tested the decoding performance under depolarizing noise with noiseless error syndrome measurements for the rotated surface code and compared against the blossom algorithm and a neural network–based decoder. We show that a similar level of decoding performance can be achieved between all tested decoders while providing a solution to the scalability issues of neural network–based decoders.