Abstract We report a fiber loop quantum buffer based on a low-loss 2 × 2 switch and a unit delay made of a fiber delay line. We characterize the device by using a two-photon polarization entangled state in which one photon of the entangled photon pair is stored and retrieved at a repetition rate up to 78 kHz. The device, which enables integer multiples of a unit delay, can store the qubit state in a unit of fiber delay line up to 5.4 km and the number of loop round-trips up to 3. Furthermore, we configure the device with other active elements to realize integer multiplier and divider of a unit delay of a qubit. The quantum state tomography is performed on the retrieved photon and its entangled photon. We obtain a state fidelity > 94 % with a maximum storage time of 52 μs with an insertion loss of 5.56 dB. To further characterize the storing and retrieving processes of the device, we perform entanglement-assisted quantum process tomography on the buffered qubit state. The process fidelity of the device is > 0.98. Our result implies that the device preserves the superposition and entanglement of a qubit state from a two-photon polarization-entangled state. This is a significant step towards facilitating applications in optical asynchronous transfer mode based quantum networks.
Abstract We report a fiber loop quantum buffer based on a low-loss 2 × 2 switch and a unit delay made of a fiber delay line. We characterize the device by using a two-photon polarization entangled state in which one photon of the entangled photon pair is stored and retrieved at a repetition rate up to 78 kHz. The device, which enables integer multiples of a unit delay, can store the qubit state in a unit of fiber delay line up to 5.4 km and the number of loop round-trips up to 3. Furthermore, we configure the device with other active elements to realize integer multiplier and divider of a unit delay of a qubit. The quantum state tomography is performed on the retrieved photon and its entangled photon. We obtain a state fidelity > 94 % with a maximum storage time of 52 μs with an insertion loss of 5.56 dB. To further characterize the storing and retrieving processes of the device, we perform entanglement-assisted quantum process tomography on the buffered qubit state. The process fidelity of the device is > 0.98. Our result implies that the device preserves the superposition and entanglement of a qubit state from a two-photon polarization-entangled state. This is a significant step towards facilitating applications in optical asynchronous transfer mode based quantum networks.
Abstract Various near-term quantum networking applications will benefit from low-loss, fiber-coupled photonic quantum memory devices with high efficiencies. We demonstrate a fiber-coupled loop-and-switch quantum memory platform with a pass-through efficiency of ~54% and an overall storage efficiency that scales as ~0.5 N +1 where N is the number of storage cycles. We highlight the trade-off between memory lifetime and qubit accessibility in this platform by using two different storage cycle times of ~40 ns and ~0.5 μs, and demonstrate high-fidelity storage and retrieval of ultra-broadband single-photon polarization qubits in both cases.
Quantum optical memories are a key component in a variety of quantum information applications, from extending quantum communication channels to building high-efficiency single-photon sources to enabling protocols requiring multiple synchronized qubits. However, most current photon storage systems utilize light-matter interactions and are therefore not broadband; meanwhile the available broader-bandwidth photon storage systems operate with somewhat shorter storage times or require cryogenic operation. Here we develop a system with multiplexed free-space storage cavities, able to store single photons with high efficiency over variable delays, up to 12.5 µs, and over multiple nanometers bandwidth at room temperature. The system can store multiple qubits encoded in various degrees of freedom (e.g., time-bin, and polarization) simultaneously. The work presented here has demonstrated storage of polarization states for 1.25 µs and retrieval through single-mode fiber with a state fidelity >99% and efficiency 82%.
The realization of a scalable quantum internet relies on the ability to temporally align asynchronous photonic signals through on-demand buffering. While matter-based quantum memories achieve long storage times, their extremely narrow bandwidths and cryogenic requirements pose significant barriers to integration with existing telecommunications infrastructure. Conversely, current all-optical memories operate at room temperature but are hampered by high input/output losses and a lack of universality across different photonic degrees of freedom. Here, we demonstrate a universal, fully fiber-integrated quantum buffer operating over the full telecom C-band that overcomes these fundamental trade-offs. By implementing an actively switched dual-Sagnac cavity driven by cross-phase modulation, we achieve an ultra-low input/output loss of 0.46 dB and a storage time exceeding 18 μs. The device exhibits an operational bandwidth exceeding 12.5 THz ($\sim$100 nm), covering the full telecom C-band. We show the simultaneous buffering of over 200 temporal modes with the ability to address them either collectively or one by one. We demonstrate high-fidelity storage for all three degrees of freedom compatible with optical fiber propagation, namely time-bin, frequency-bin, and polarization qubits, along with faithful preservation of entanglement, confirming the platform's true universality. These results provide a robust, room-temperature solution for the high-rate synchronization of multidimensional quantum states, clearing a major hurdle for the deployment of global photonic quantum networks.
Packet-switched quantum networks require buffers that can delay qubit payloads while routing information is read out in real time. Previous approaches have not provided this functionality in a fully fibre-integrated architecture compatible with telecom infrastructure. Here we demonstrate an optical-fibre-integrated buffer, based on a recirculating loop and a fibre storage line, in which the storage time of a polarisation-encoded qubit payload is determined by readout of an attached packet header. The key component behind this achievement is an ultra-low-loss poled fibre phase modulator, which provides fast, polarisation-insensitive switching directly in fibre and allows header and payload to be processed within the buffer. We demonstrate storage and retrieval of polarisation-encoded qubit payloads for storage times up to 47 μs, with an average quantum bit error rate of 1.8% together with stable operation over several hours. These results establish a practical fibre-based architecture for packet-level quantum network buffering that can easily integrate into the current telecommunication infrastructure opening up new paths for deployment of the quantum internet.
We demonstrate a high-efficiency, free space optical delay line utilizing a nested multipass cell architecture. This design supports extended optical paths with low loss, aided by custom broadband dielectric coatings that provide high reflectivity across a wide spectral bandwidth. The cell is characterized using polarization-entangled photon pairs, with signal photons routed through the delay line and idler photons used as a timing reference. Quantum state tomography performed on the entangled pairs reveals entanglement preservation with fidelity of 99.6(9)% following a single-transit delay of up to 687 ns, accompanied by a photon retrieval efficiency of 95.390(5)%. The delay is controllable and can be set between 1.8 and 687 ns in ∼12.6 ns increments. These results position this delay line as a strong candidate for all-optical quantum memories and synchronization modules for scalable quantum networks.
During the last decade, quantum entanglement has paved the way out to of the lab modern applications such as quantum computation and communication. Today, small scale quantum networks exist already, but they are limited to a few 100 km distance, due to intrinsic fiber transmission losses and non perfect detectors. These networks are typically established using photon pair sources based on spontaneous parametric down conversion (SPDC). Widely used entanglement observables are time-bin and polarization, where the latter one is undoubtedly simpler to analyze due to lack of interferometric devices. It was shown recently, that introducing quantum memories (QM) between the communication parties could increase both communication speed and distance. Such memories already exist, but their narrow absorption bandwidth does not match the broadband emission spectrum of SPDC sources. Our report is twofold. First, we introduce a new polarization entanglement scheme based on a birefringent delay line (BDL). A pair of incoming photons is projected on a polarizing beam splitter (PBS), where vertically polarized photons travel along a polarization maintaining fiber loop accumulating a delay δ compared to horizontally polarized photons, which exit the BDL directly upon reflection at the PBS. Via post selection of only simultaneously arriving photon pair events, we create entangled states of the form α|H>_1|H>_2 + e^(iφ)β|V>_1 |V>_2. The probability amplitudes α and β are simply tuned by controlling the input pair's polarization and the phase φ can be varied by piezo fiber stretcher (PZT) in the delay line. Therefore, any superposition of the polarization entangled Bell states can be created. The scheme may also be used for entanglement distillation of non maximally entangled states, e.g. emitted by quantum dots. We will introduce all requirements needed to create entanglement from such a BDL. Second, we show how to apply this scheme to produce polarization entanglement from one of the most efficient photon pair generators, namely a periodically poled Lithium Niobate waveguide structure (PPLN/W), where the quasi phase matching is optimized for the type-0 SPDC interaction. The pair's wavelength is chosen in the standardized ITU-21 channel of the low loss telecom C-band and a fiber Bragg grating is applied to reduce the initial spectral bandwidth from 5 THz to 540 MHz, which is suitable for some solid-state quantum memories. Using the BDL, we create the maximally entangled states, with near perfect quality, which is proven by a violation of the Bell's inequalities by more than 29 standard deviations. We achieve a source spectral brightness of 211 narrowband polarization entangled pairs created per second, mW of pump power, and MHz of spectral bandwidth, coupled into a single mode fiber. This is on the same level as the best time-bin entanglement sources reported to date. The source is very practical due to the use of standard telecom fiber components. Moreover the choice for polarization instead of time-bin entanglement allows for simple state analysis using only rotating PBSs. This is a non negligible advantage, especially for narrowband photons with long coherence times, where time-bin analysis requires interferometer path length differences on the order of a few meters stabilized to a few tens of nanometers. Non unit visibilities are solely explained by the nonlinear character of our photon pair source, giving rise to double pair contributions. Applying this scheme to deterministic photon pair sources should result in perfect quality entanglement. We believe that our scheme should play an important role for future quantum networking applications.