In the near-term noisy intermediate-scale quantum (NISQ) era, high noise will significantly reduce the fidelity of quantum computing. What's worse, recent works reveal that the noise on quantum devices is not stable, that is, the noise is dynamically changing over time. This leads to an imminent challenging problem: At run-time, is there a way to efficiently achieve a consistent high-fidelity quantum system on unstable devices? To study this problem, we take quantum learning (a.k.a., variational quantum algorithm) as a vehicle, which has a wide range of applications, such as combinatorial optimization and machine learning. A straightforward approach is to optimize a variational quantum circuit (VQC) with a parameter-shift approach on the target quantum device before using it; however, the optimization has an extremely high time cost, which is not practical at run-time. To address the pressing issue, in this paper, we proposed a novel quantum pulse-based noise adaptation framework, namely QuPAD. In the proposed framework, first, we identify that the CNOT gate is the fidelity bottleneck of the conventional VQC, and we employ a more robust parameterized multi-qubit gate (i.e., Rzx gate) to replace CNOT gate. Second, by benchmarking Rzx gate with different parameters, we build a fitting function for each coupling qubit pair, such that the deviation between the theoretic output of Rzx gate and its on-device output under a given pulse amplitude and duration can be efficiently predicted. On top of this, an evolutionary algorithm is devised to identify the pulse amplitude and duration of each Rzx gate (i.e., calibration) and find the quantum circuits with high fidelity. Experiments show that the runtime on quantum devices of QuPAD with 8–10 qubits is less than 15 minutes, which is up to 270 x faster than the parameter-shift approach. In addition, compared to the vanilla VQC as a baseline, QuPAD can achieve 59.33% accuracy gain on a classification task, and average 66.34% closer to ground state energy for molecular simulation.
In the near-term noisy intermediate-scale quantum (NISQ) era, high noise will significantly reduce the fidelity of quantum computing. What's worse, recent works reveal that the noise on quantum devices is not stable, that is, the noise is dynamically changing over time. This leads to an imminent challenging problem: At run-time, is there a way to efficiently achieve a consistent high-fidelity quantum system on unstable devices? To study this problem, we take quantum learning (a.k.a., variational quantum algorithm) as a vehicle, which has a wide range of applications, such as combinatorial optimization and machine learning. A straightforward approach is to optimize a variational quantum circuit (VQC) with a parameter-shift approach on the target quantum device before using it; however, the optimization has an extremely high time cost, which is not practical at run-time. To address the pressing issue, in this paper, we proposed a novel quantum pulse-based noise adaptation framework, namely QuPAD. In the proposed framework, first, we identify that the CNOT gate is the fidelity bottleneck of the conventional VQC, and we employ a more robust parameterized multi-qubit gate (i.e., Rzx gate) to replace CNOT gate. Second, by benchmarking Rzx gate with different parameters, we build a fitting function for each coupling qubit pair, such that the deviation between the theoretic output of Rzx gate and its on-device output under a given pulse amplitude and duration can be efficiently predicted. On top of this, an evolutionary algorithm is devised to identify the pulse amplitude and duration of each Rzx gate (i.e., calibration) and find the quantum circuits with high fidelity. Experiments show that the runtime on quantum devices of QuPAD with 8–10 qubits is less than 15 minutes, which is up to 270 x faster than the parameter-shift approach. In addition, compared to the vanilla VQC as a baseline, QuPAD can achieve 59.33% accuracy gain on a classification task, and average 66.34% closer to ground state energy for molecular simulation.
Quantum computing is among the most promising emerging techniques to solve problems that are computationally intractable on classical hardware. A large body of existing works focus on using variational quantum algorithms on the gate level for machine learning tasks, such as the variational quantum circuit (VQC). However, VQC has limited flexibility and expressibility due to limited number of parameters, e.g. only one parameter can be trained in one rotation gate. On the other hand, we observe that quantum pulses are lower than quantum gates in the stack of quantum computing and offers more control parameters. Inspired by the promising performance of VQC, in this paper we propose variational quantum pulses (VQP), a novel paradigm to directly train quantum pulses for learning tasks. The proposed method manipulates variational quantum pulses by pulling and pushing the amplitudes of pulses in an optimization framework. Similar to variational quantum algorithms, our framework to train pulses maintains the robustness to noise on Noisy Intermediate-Scale Quantum (NISQ) computers. In an example task of binary classification, VQP learning achieves up to 11% and 9% higher accuracy compared with VQC learning on the qiskit pulse simulators (with system model from real machine) and ibmq-jarkata, respectively, demonstrating its effectiveness and feasibility. Stability for VQP to obtain reliable results has also been verified in the presence of noise.
Quantum noise is the key challenge in Noisy Intermediate-Scale Quantum (NISQ) computers. Previous work for mitigating noise has primarily focused on gate-level or pulse-level noise-adaptive compilation. However, limited research has explored a higher level of optimization by making the quantum circuits themselves resilient to noise.In this paper, we propose QuantumNAS, a comprehensive framework for noise-adaptive co-search of the variational circuit and qubit mapping. Variational quantum circuits are a promising approach for constructing quantum neural networks for machine learning and variational ansatzes for quantum simulation. However, finding the best variational circuit and its optimal parameters is challenging due to the large design space and parameter training cost. We propose to decouple the circuit search from parameter training by introducing a novel SuperCircuit. The SuperCircuit is constructed with multiple layers of pre-defined parameterized gates (e.g., U3 and CU3) and trained by iteratively sampling and updating the parameter subsets (SubCircuits) of it. It provides an accurate estimation of SubCircuits performance trained from scratch. Then we perform an evolutionary co-search of SubCircuit and its qubit mapping. The SubCircuit performance is estimated with parameters inherited from SuperCircuit and simulated with real device noise models. Finally, we perform iterative gate pruning and finetuning to remove redundant gates in a fine-grained manner.Extensively evaluated with 12 quantum machine learning (QML) and variational quantum eigensolver (VQE) benchmarks on 14 quantum computers, QuantumNAS significantly outperforms noise-unaware search, human, random, and existing noise-adaptive qubit mapping baselines. For QML tasks, QuantumNAS is the first to demonstrate over 95% 2-class, 85% 4-class, and 32% 10-class classification accuracy on real quantum computers. It also achieves the lowest eigenvalue for VQE tasks on H2, H2O, LiH, CH4, BeH2compared with UCCSD baselines. We also open-source the TorchQuantum library for fast training of parameterized quantum circuits to facilitate future research.
Abstract Noisy Intermediate-Scale Quantum (NISQ) devices are near-term quantum computing devices that inherently suffer from imperfect gate implementation, decoherence, and measurement noise. The main type of variational quantum algorithms(VQAs) is based on Parameterized Quantum Circuits (PQCs), which, however, face practical challenges due to optimization instability of optimization caused by noise and reduced performance. In this paper, we suggest a comprehensive noise-resilient optimization framework for PQCs, which explicitly incorporates noise-resilient circuit architecture design, incorporating noise-aware training strategies into the variational optimization loop. The framework uses circuit structures that are efficient in depth and are hardware compatible in addition to adaptive optimizer choice, stochastic optimization, and averaging as a part of repeated measurement to reduce the impacts of realistic noise. Large-scale experiments are performed with different amounts of qubits, depths of the circuit and noise strengths with realistic noise models. The findings indicate that the convergence rate is faster, the stability is increased, the variability of run-to-run variability is minimized, and other robustness is better than the noise-unaware optimization techniques. Moreover, systematic studies determine optimal operating regions that optimally trade-off expressibility and noise tolerance to offer useful design advice on trusted implementation of VQAs with near-term quantum hardware.
Abstract Quantum computing has recently emerged as a novel paradigm for solving problems otherwise intractable on classical computers, yet the practical progress of quantum computers is severely impacted by noise, decoherence, and imperfect gate operations in Noisy Intermediate-Scale Quantum (NISQ) devices. Specific to IBM Quantum hardware, imperfections due to readout error, gate errors, and device drift, which depends on time, resolves limits for the accuracy of outputs from our algorithms. The mitigation strategies currently used, for example, Measurement Error Mitigation (MEM), Zero Noise Extrapolation (ZNE), and Clifford Data Regression (CDR), offer improvement over raw, unmitigated outputs, but they are static and not dynamic; the reduction of noise in within an NISQ device is temporal and can vary in patterns that are non-zero. In addition to this, using the conventional methods provides inconsistent and suboptimal results.This study will provide enhanced reliability with respect to performing quantum computation on IBM Quantum hardware with a unique mitigation framework that is adaptive and computationally efficient for a high-fidelity output. The problem taken on here is the failure of existing error mitigation strategies to provide adaptive noise compensation, as they assume a statically-distributed error, despite the performance-related characteristics already being documented in regards to calibration drift and variation over time.To achieve this, we propose a Hybrid Adaptive Error Mitigation (HAEM) approach that includes baseline measurement error mitigation and an additional correction layer that utilizes realtime calibration information, along with lightweight machine learning models. The approach can be broken down into three steps: (i) perform standard measurement error mitigation to reduce classical readout noise, (ii) execute compact calibration circuits, such as Bell states, GHZ states and Clifford benchmarks to capture then current error profile of the device, and (iii) use a lightweight machine learning model (having been trained on historical and newest calibration data) to dynamically change the mitigation weights applied for the target quantum algorithm. All implementation is done using Qiskit Runtime to ensure low-latency execution, and we completed experiments on both Qiskit Aer noisy simulators and IBM Quantum devices.Initial results suggest HAEM improved the outputs of quantum algorithms' fidelity compared to the unmitigated runs and the baseline measurement error mitigation (MEM) runs. On the noisy simulators, HAEM increased fidelity from a raw performance of 0.65 to 0.87, nearly a 34% improvement. In fairer hardware-like scenarios, fidelity-on-average was persistently 12% better than MEM, with nearly equal time duration for the additional adaptive measurements. The adaptive aspect of HAEM consistently supported subsequent calibration cycles of the device and was effective to continue providing fidelity improvements despite the static mitigation performance degrading.To sum up, the proposed HAEM framework is a modern and viable alternative for error mitigation which brings together the benefits of baseline approaches with corrections that are driven by fixed-function error-corrective, adaptive learning. As both learning-based and standard baseline approaches can only achieve fixed levels of performance, HAEM, through its use of noise mitigation both at execution time and through correlating it with standard data, provides a route towards reliable quantum computations on current IBM hardware. HAEM also presents a contribution to the NISQ error-resilient landscape, and however it is intended that it will continue to improve future applications of hybrid workflows of quantum and classical computation where error mitigation and resilience is important.
The execution of Variational Quantum Algorithms on Noisy Intermediate-Scale Quantum hardware is severely impacted by hardware noise variations over time and decoherence. This work introduces an Adaptive Noise-Aware Variational Quantum Classifier (ANAVQC) that integrates Zero-Noise Extrapolation (ZNE) dynamically into the training loop to counter variations. The framework approximates the instantaneous depolarizing noise from calibration and adapts noise scaling and linear extrapolation to estimate noise-free expectation values at training. A two-qubit parameterized quantum circuit is built and simulated in MATLAB, with the inclusion of stochastic gradient descent coupled with parameter-shift-based gradients. The model is conditioned on a synthetic binary classification data under a time-varying depolarizing noise profile and exhibits improved convergence stability and classification accuracy over non-adaptive methods. The simulation results identify that adaptive ZNE increases model robustness against time-varying noise and offers a scalable route to reliable quantum machine learning on practical NISQ hardware. The current ANAVQC scheme is extendable to multi-qubit platforms and practical quantum backends for the purposes of future experimental testing.
While Quantum Machine Learning (QML) holds great potential, its practical realization on Noisy Intermediate-Scale Quantum (NISQ) hardware has been hindered by the limitations of variational quantum circuits (VQCs). Recent evidence suggests that VQCs suffer from severe trainability and noise-related issues, leading to growing skepticism about their long-term viability. However, the possibility of implementing learning models directly at the pulse-control level remains comparatively unexplored and could offer a promising alternative. In this work, we formulate a pulse-based variant of data re-uploading, embedding trainable parameters directly into the native system's dynamics. We benchmark our approach on a simulated superconducting transmon processor with realistic noise profiles. The pulse-based model consistently outperforms its gate-based counterpart, exhibiting higher test accuracy and improved generalization under equivalent noise conditions. Moreover, by systematically increasing noise strength, we show that pulse-level implementations retain higher fidelity for longer, demonstrating enhanced resilience to decoherence and control errors. These results suggest that pulse-native architectures, though less explored, may offer a viable and hardware-aligned path forward for practical QML in the NISQ era.