We examine the role of diagnostic quantum measurements on the work statistics of a finite-time quantum Otto heat engine operated in the steady state. We consider three pointer-based measurement schemes that differ in the number of system-pointer interactions and pointer measurements. We show that the coherence of the working substance and the work output of the engine can be controlled by tuning the monitoring measurements. Moreover, for a working substance consisting of a two-level system we show that while all three schemes reproduce the predictions of the cycle without any monitoring for the average work in the limit of infinitely weak measurement, only two of the schemes can reproduce the two-point projective measurement results in the limit of strong measurement.
We examine the role of diagnostic quantum measurements on the work statistics of a finite-time quantum Otto heat engine operated in the steady state. We consider three pointer-based measurement schemes that differ in the number of system-pointer interactions and pointer measurements. We show that the coherence of the working substance and the work output of the engine can be controlled by tuning the monitoring measurements. Moreover, for a working substance consisting of a two-level system we show that while all three schemes reproduce the predictions of the cycle without any monitoring for the average work in the limit of infinitely weak measurement, only two of the schemes can reproduce the two-point projective measurement results in the limit of strong measurement.
Measurement-based quantum heat engines have attracted significant interest as alternatives to conventional thermal engines, as they replace the hot thermal reservoir with quantum measurements, thereby offering greater controllability and simpler implementation. Motivated by these advantages, we investigate a measurement-driven quantum Otto engine with a qubit working substance and study the optimal work extractable from such engines, including whether their performance can surpass that of conventional quantum Otto cycles. We analyze the engine in both the infinite-time (adiabatic) and finite-time (non-adiabatic) regimes, considering two distinct implementations obtained through optimization over all projection-valued measurements (PVMs) and over all two-outcome positive operator-valued measurements (POVMs). We show that measurement-based engines can outperform conventional quantum Otto engines within specific parameter regimes and that POVM-based engines can yield higher optimal work extraction than PVM-based ones. Furthermore, by incorporating the thermodynamic cost associated with resetting the auxiliary system required for POVM implementation, we demonstrate that the resulting net work output can still exceed that of PVM-based engines under suitable conditions on the spectral gaps and cold bath temperature. We also identify regimes in which non-adiabatic implementations can yield higher work output and efficiency than their adiabatic counterparts. Our study provides operational guidelines for designing improved measurement-driven quantum Otto engines.
The working substance fueling a quantum heat engine may contain coherence in its energy basis, depending on the dynamics of the engine cycle. In some models of quantum Otto heat engines, energy coherence has been associated with entropy production and quantum friction. We considered a quantum Otto heat engine operating at finite time. Coherence is generated and the working substance does not reach thermal equilibrium after interacting with the hot heat reservoir, leaving the working substance in a state with residual energy coherence. We observe an interferencelike effect between the residual coherence (after the incomplete thermalization) and the coherence generated in the subsequent finite-time stroke. We introduce analytical expressions highlighting the role of coherence and examine how this dynamical interference effect influences the engine performance. Additionally, in this scenario in which coherence is present along the cycle, we argue that the careful tuning of the cycle parameters may exploit this interference effect and make coherence acts like a dynamical quantum lubricant. To illustrate this, we numerically consider an experimentally feasible example and compare the engine performance to the performance of a similar engine where the residual coherence is completely erased, ruling out the dynamical interference effect.
Recently, measurement-based quantum thermal machines have drawn more attention in the field of quantum thermodynamics. However, the previous results on quantum Otto heat engines were either limited to special unital and nonunital channels in the bath stages, or a specific driving protocol at the work strokes and assuming the cycle being time-reversal symmetric, i.e., V^{†}=U (or V=U). In this paper, we consider a single spin-1/2 quantum Otto heat engine, by first replacing one of the heat baths by an arbitrary unital channel, and then we give the exact analytical expression of the characteristic function from which all the cumulants of heat and work emerge. We prove that under the effect of monitoring, ν_{2}>ν_{1} is a necessary condition for positive work, either for a symmetric or asymmetric-driven Otto cycle. Furthermore, going beyond the average we show that the ratio of the fluctuations of work and heat is lower and upper-bounded when the system is working as a heat engine. However, differently from the previous results in the literature, we consider the third and fourth cumulants as well. It is shown that the ratio of the third (fourth) cumulants of work and heat is not upper-bounded by unity nor lower-bounded by the third (fourth) power of the efficiency, as is the case for the ratio of fluctuations. Finally, we consider applying a specific unital map that plays the role of a heat bath in a coherently superposed manner, and we show the role of the initial coherence of the control qubit on efficiency, on the average work and its relative fluctuations.
The working substance fueling a quantum heat engine may contain prominent quantum properties such as coherence and nonclassical correlations. In particular, coherence has been somewhat related to quantum friction, whose origin has been mostly associated with the noncommutativity of a driven Hamiltonian at different times. Here, we consider a quantum Otto heat engine operated at finite time and undergoing incomplete thermalization with a heat source. We introduce analytical expressions relating the engine efficiency and extractable power to the coherence measured in the energy basis of the working substance during the engine cycle. We show that coherence, which has been related to an increase in entropy production and irreversibility, can in also be employed to improve the quantum engine performance, mitigating quantum friction. Such an improvement may be achieved by carefully tuning cycle parameters. To illustrate this coherent improvement we performed a numerical analysis in an experimentally feasible example.
We compare quantum Otto engines based on two different cycle models: a two-bath model, with a standard heat source and sink, and a measurement-based protocol, where the role of heat source is played by a quantum measurement. We furthermore study these cycles using two different "working substances": a single qutrit (spin-1 particle) or a pair of qubits (spin-1/2 particles) interacting via the XXZ Heisenberg interaction. Although both cycle models have the same efficiency when applied on a single-qubit working substance, we find that both can reach higher efficiencies using these more complex working substances by exploiting the existence of "idle" levels, i.e., levels that do not shift while the spins are subjected to a variable magnetic field. Furthermore, with an appropriate choice of measurement, the measurement-based protocol becomes more efficient than the two-bath model.
We present a quantum-heat engine model utilizing a dual spin-pair architecture, wherein an Otto-like cycle is implemented using a single heat bath. The conventional cold bath is replaced by a measurement protocol, enabling engine operation without the need for a second thermal reservoir. Unlike standard quantum-heat engines, our framework employs an ancillary spin pair in a two-dimensional configuration to regulate performance. Operating in finite time, the engine attains finite power, which is enhanced through quantum correlations, specifically correlation between spin pairs and projective measurements on the ancillary pair. The system consists of dual-qubit pairs, where one pair serves as the working medium and the other as an ancillary system facilitating measurement-induced heat exchange. We demonstrate that the engine efficiency can exceed the standard quantum Otto limit through local control of the ancillary pair while maintaining nonzero power output. Moreover, correlation between spin pairs enables efficiency modulation via the measurement basis, underscoring the role of quantum resources in optimizing quantum thermal machines.