Current quantum technologies are at the cusp of becoming useful, but still face formidable obstacles such as noise. Noise severely limits the ability to scale quantum devices to the point that they would offer an advantage over classical devices. To understand the sources of noise it is necessary to fully characterise the quantum processes occurring across many time steps; only this would reveal any time-correlated noise called non-Markovian. Previous efforts have attempted such a characterisation but obtained only a limited reconstruction of such multi-time processes. In this work, we fully characterise a multi-time quantum process on superconducting hardware using in-house and cloud-based quantum processors. We achieve this by employing sequential measure-and-prepare operations combined with post-processing. Employing a recently developed formalism for multi-time processes, we detect general multi-time correlated noise. We also detect quantum correlated noise which demonstrates that part of the noise originates from quantum sources, such as physically nearby qubits on the chip.
Current quantum technologies are at the cusp of becoming useful, but still face formidable obstacles such as noise. Noise severely limits the ability to scale quantum devices to the point that they would offer an advantage over classical devices. To understand the sources of noise it is necessary to fully characterise the quantum processes occurring across many time steps; only this would reveal any time-correlated noise called non-Markovian. Previous efforts have attempted such a characterisation but obtained only a limited reconstruction of such multi-time processes. In this work, we fully characterise a multi-time quantum process on superconducting hardware using in-house and cloud-based quantum processors. We achieve this by employing sequential measure-and-prepare operations combined with post-processing. Employing a recently developed formalism for multi-time processes, we detect general multi-time correlated noise. We also detect quantum correlated noise which demonstrates that part of the noise originates from quantum sources, such as physically nearby qubits on the chip.
Abstract In the scale-up of quantum computers, the framework underpinning fault-tolerance generally relies on the strong assumption that environmental noise affecting qubit logic is uncorrelated (Markovian). However, as physical devices progress well into the complex multi-qubit regime, attention is turning to understanding the appearance and mitigation of correlated — or non-Markovian — noise, which poses a serious challenge to the progression of quantum technology. This error type has previously remained elusive to characterisation techniques. Here, we develop a framework for characterising non-Markovian dynamics in quantum systems and experimentally test it on multi-qubit superconducting quantum devices. Where noisy processes cannot be accounted for using standard Markovian techniques, our reconstruction predicts the behaviour of the devices with an infidelity of 10 −3 . Our results show this characterisation technique leads to superior quantum control and extension of coherence time by effective decoupling from the non-Markovian environment. This framework, validated by our results, is applicable to any controlled quantum device and offers a significant step towards optimal device operation and noise reduction.
Characterisation protocols have so far played a central role in the development of noisy intermediate-scale quantum (NISQ) computers capable of impressive quantum feats. This trajectory is expected to continue in building the next generation of devices: ones that can surpass classical computers for particular tasks -- but progress in characterisation must keep up with the complexities of intricate device noise. A missing piece in the zoo of characterisation procedures is tomography which can completely describe non-Markovian dynamics over a given time frame. Here, we formally introduce a generalisation of quantum process tomography, which we call process tensor tomography. We detail the experimental requirements, construct the necessary post-processing algorithms for maximum-likelihood estimation, outline the best-practice aspects for accurate results, and make the procedure efficient for low-memory processes. The characterisation is a pathway to diagnostics and informed control of correlated noise. As an example application of the hardware-agnostic technique, we show how its predictive control can be used to substantially improve multi-time circuit fidelities on superconducting quantum devices. Our methods could form the core for carefully developed software that may help hardware consistently pass the fault-tolerant noise threshold.
Characterising multi-time quantum processes is essential for analysing temporally correlated noise and for designing effective control and mitigation strategies. A complete operational description through multi-time process tomography requires an informationally complete set of probes, which necessarily includes non-deterministic intermediate operations. On present-day quantum devices, such operations are commonly implemented using mid-circuit measurements and reset, which are technologically limited and can introduce noise and overhead in terms of ancilla requirement. In this work, we study the minimal ancillary dimension required for complete characterisation of multi-time processes. We show that sequential interactions with a single qubit ancilla can generate an informationally complete family of correlated probes for processes of arbitrary length, without requiring mid-circuit measurements or reset. Our result provides a resource-efficient route for complete multi-time process tomography and establishes that one qubit of coherent ancillary memory suffices for full reconstruction of arbitrary multi-time dynamics.
As progress is made towards the first generation of error-corrected quantum computers, robust characterization and validation protocols are required to assess the noise environments of physical quantum processors. While standard coherence metrics and characterization protocols such as T1 and T2, process tomography, and randomized benchmarking are now ubiquitous, these techniques provide only partial information about the dynamic multiqubit loss channels responsible for processor errors, which can be described more fully by a Lindblad operator in the master equation formalism. Here, we introduce and experimentally demonstrate Lindblad tomography, a hardware-agnostic characterization protocol for tomographically reconstructing the Hamiltonian and Lindblad operators of a quantum noise environment from an ensemble of time-domain measurements. Performing Lindblad tomography on a small superconducting quantum processor, we show that this technique naturally builds on standard process tomography and T1/T2 measurement protocols, characterizes and accounts for state-preparation and measurement errors, and allows one to place bounds on the fit to a Markovian model. Comparing the results of single- and two-qubit measurements on a superconducting quantum processor, we demonstrate that Lindblad tomography can also be used to identify and quantify sources of crosstalk on quantum processors, such as the presence of always-on qubit-qubit interactions.
Every year, substantial theoretical and experimental progress is made towards the realisation of a genuinely new computational paradigm in the construction of a quantum computer. But progress is fractal; to make headway is to unearth the next set of obstacles. Decades of work has so far overcome physical, mathematical, engineering, and information theoretic obstacles to produce the remarkable high-fidelity devices we see today. But these devices must be near perfect to be useful. Indeed, advancements so far have precipitated sensitivity to a host of complex dynamical and control-based effects. Chief among these today are non-Markovian memory effects, where interactions between a quantum system and its surrounding environment can give rise to multi-time correlations. In this thesis, we address this issue and formally present a generalisation of quantum process tomography, called process tensor tomography (PTT). This establishes the ability to rigorously and systematically characterise non-Markovian open quantum systems, resolving many long-standing issues in the field. In the first part of this work, we present an original review of the literature and motivate the problem at hand. In the second, we develop the framework of PTT, including experiment design, post-processing algorithms, and both simulated and near-term device demonstrations. In particular, we demonstrate this as a tool for obtaining in-depth diagnostics about the nature and origin of temporal quantum correlations. Lastly, we dedicate our efforts to efficiency and self-consistency. To this effect, we explore theoretically processes with sparse memory structures. We then leverage this to develop various efficient estimation techniques tailored for different settings. The result is a robust and lightweight framework capable of both reconstructing and optimally controlling any non-Markovian open quantum dynamics.
Randomised measurements can efficiently characterise many-body quantum states by learning the expectation values of observables with low Pauli weights. In this paper, we generalise the theoretical tools of classical shadow tomography to the temporal domain to explore multi-time phenomena. This enables us to efficiently learn the features of multi-time processes such as correlated error rates, multi-time non-Markovianity, and temporal entanglement. We test the efficacy of these tools on a noisy quantum processor to characterise its noise features. Implementing these tools requires mid-circuit instruments, typically slow or unavailable in current quantum hardware. We devise a protocol to achieve fast and reliable instruments such that these multi-time distributions can be learned to a high accuracy. This enables a compact matrix product operator representation of large processes allowing us to showcase a reconstructed 20-step process (whose naive dimensionality is that of a 42-qubit state). Our techniques are pertinent to generic quantum stochastic dynamical processes, with a scope ranging across condensed matter physics, quantum biology, and in-depth diagnostics of noisy intermediate-scale quantum devices.