Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2308.00369 · Physical Review Research

Quantum error correction with an Ising machine under circuit-level noise

Jun Fujisaki, Kazunori Maruyama, Hirotaka Oshima, Shintaro Sato, Tatsuya Sakashita, Yusaku Takeuchi, Keisuke Fujii

Published Dec 19, 2023• 5 citations
arXivHTMLPDF

Abstract

Efficient decoding to estimate error locations from outcomes of syndrome measurements is the prerequisite for quantum error correction. Decoding in the presence of circuit-level noise including measurement errors should be considered in case of actual quantum computing devices. In this paper, we develop a decoder for circuit-level noise that solves the error estimation problems as Ising-type optimization problems. We confirm that the threshold theorem in the surface code under circuit-level noise is reproduced with an error threshold of approximately 0.4%. We also demonstrate the advantage of the decoder through which the $Y$ error detection rate can be improved compared with other matching-based decoders. Our results reveal that a lower logical error rate can be obtained using our algorithm compared with that of the minimum-weight perfect matching algorithm.

DOI
10.1103/physrevresearch.5.043261

Related papers

Optimal Circuit-Level Decoding for Surface Codes

Bettina Heim, Krysta M. Svore, Matthew B. Hastings

Surface codes exploit topological protection to increase error resilience in quantum computing devices and can in principle be implemented in existing hardware. They are one of the most promising candidates for active error correction, not least due to a polynomial-time decoding algorithm which admits one of the highest predicted error thresholds. We consider the dependence of this threshold on underlying assumptions including different noise models, and analyze the performance of a minimum weight perfect matching (MWPM) decoding compared to a mathematically optimal maximum likelihood (ML) decoding. Our ML algorithm tracks the success probabilities for all possible corrections over time and accounts for individual gate failure probabilities and error propagation due to the syndrome measurement circuit. We present the very first evidence for the true error threshold of an optimal circuit level decoder, allowing us to draw conclusions about what kind of improvements are possible over standard MWPM.

arXiv:1609.06373•Sep 20, 2016•10 citations

Developing a Practical Neural-Network Surface Code Decoder under Circuit-Level Noise

Aarush Pancholi

Abstract. Suppressing qubit errors is one of the main challenges in building fault-tolerant quantum computers, requiring quantum error correction to protect fragile quantum information during computation cycles. The surface code is a leading approach because of its high error tolerance and compatibility with realistic hardware, but it requires a decoder that can accurately and quickly use the syndrome measurements to discern whether a logical error has occurred. This study investigates whether a feedforward neural-network can serve as a practical decoder for the surface code under circuit-level noise. Using the Stim software package, this study generates surface code circuits at multiple code distances and physical error rates and compiles them into detector samplers, then trains a PyTorch neural-network to predict whether a logical observable flip occurred from the syndrome data. The neural-network decoder is compared against Minimum-Weight Perfect Matching (MWPM), focusing on metrics including logical error rate and inference speed. The results show that the neural-network decoder performs competitively with MWPM for code distances 3 and 5 and provides inference time advantages at higher physical error rates as its inference time remains relatively constant over increasing physical error rates. However, MWPM outperforms the neural-network at distance 7, suggesting that scalability remains a major limitation for neural-network decoders. These results show that neural-networks are a promising approach for tackling quantum error correction, although future work is still needed to improve these models for real systems at larger code distances.

•Aug 2, 2026•0 citations

Correcting a noisy quantum computer using a quantum computer

Pan Zhang

Quantum computers require error correction to achieve universal quantum computing. However, current decoding of quantum error-correcting codes relies on classical computation, which is slower than quantum operations in superconducting qubits. This discrepancy makes the practical implementation of real-time quantum error correction challenging. In this work, we propose a decoding scheme that leverages the operations of the quantum circuit itself. Given a noisy quantum circuit $A$, we train a decoding quantum circuit $B$ using syndrome measurements to identify the logical operators needed to correct errors in circuit $A$. The trained quantum circuit $B$ can be deployed on quantum devices, such as superconducting qubits, to perform real-time decoding and error correction. Our approach is applicable to general quantum codes with multiple logical qubits and operates efficiently under various noise conditions, and the decoding speed matches the speed of the quantum circuits being corrected. We have conducted numerical experiments using surface codes up to distance 7 under circuit-level noise, demonstrating performance on par with the classical minimum-weight perfect matching algorithm. Interestingly, our method reveals that the traditionally classical task of decoding error-correcting codes can be accomplished without classical devices or measurements. This insight paves the way for the development of self-correcting quantum computers.

arXiv:2506.08331•Jun 10, 2025•0 citations

Efficient Decoding of Surface Code Syndromes for Error Correction in Quantum Computing

Debasmita Bhoumik, Pinaki Sen, Ritajit Majumdar +3 more

Errors in surface code have typically been decoded by Minimum Weight Perfect Matching (MWPM) based method. Recently, neural-network-based Machine Learning (ML) techniques have been employed for this purpose. Here we propose a two-level (low and high) ML-based decoding scheme, where the first level corrects errors on physical qubits and the second one corrects any existing logical errors, for different noise models. Our results show that our proposed decoding method achieves $\sim10 \times$ and $\sim2 \times$ higher values of pseudo-threshold and threshold respectively, than for MWPM. We show that usage of more sophisticated ML models with higher training/testing time, do not provide significant improvement in the decoder performance. Finally, data generation for training the ML decoder requires significant overhead hence lower volume of training data is desirable. We have shown that our decoder maintains a good performance with the train-test-ratio as low as $40:60$.

arXiv:2110.10896•Oct 21, 2021•4 citations

Fault-Tolerant Thresholds for the Surface Code in Excess of 5% Under Biased Noise

David K. Tuckett, Stephen D. Bartlett, Steven T. Flammia +1 more

Noise in quantum computing is countered with quantum error correction. Achieving optimal performance will require tailoring codes and decoding algorithms to account for features of realistic noise, such as the common situation where the noise is biased towards dephasing. Here we introduce an efficient high-threshold decoder for a noise-tailored surface code based on minimum-weight perfect matching. The decoder exploits the symmetries of its syndrome under the action of biased noise and generalizes to the fault-tolerant regime where measurements are unreliable. Using this decoder, we obtain fault-tolerant thresholds in excess of 6% for a phenomenological noise model in the limit where dephasing dominates. These gains persist even for modest noise biases: we find a threshold of ∼5% in an experimentally relevant regime where dephasing errors occur at a rate 100 times greater than bit-flip errors.

arXiv:1907.02554•Physical Review Letters•Mar 30, 2020•118 citations

Error Mitigation of Fault-Tolerant Quantum Circuits with Soft Information

Zeyuan Zhou, Shaun Pexton, Aleksander Kubica +1 more

Quantum error mitigation (QEM) is typically viewed as a suite of practical techniques for today's noisy intermediate-scale quantum devices, with limited relevance once fault-tolerant quantum computers become available. In this work, we challenge this conventional wisdom by showing that QEM can continue to provide substantial benefits in the era of quantum error correction (QEC), and in an even more efficient manner than it does on current devices. We introduce a framework for logical-level QEM that leverages soft information naturally produced by QEC decoders, requiring no additional data, hardware modifications, or runtime overhead beyond what QEC protocols already provide. Within this framework, we develop and analyze three logical-level QEM techniques: post-selection and runtime abort policies, probabilistic error cancellation, and zero-noise extrapolation. Our techniques reduce logical error rates by more than 100x while discarding fewer than 0.1% of shots; they also provide in situ characterization of logical channels for QEM protocols. As a proof of principle, we benchmark our approach using a surface-code architecture and two state-of-the-art decoders based on tensor-network contraction and minimum-weight perfect matching. We evaluate logical-level QEM on random Clifford circuits and molecular simulation algorithms and find that, compared to previous approaches relying on QEC only or QEC combined with QEM, we can achieve up to 87.4% spacetime overhead savings. Our results demonstrate that logical-level QEM with QEC decoder soft information can reliably improve logical performance, underscoring the efficiency and usefulness of QEM techniques for fault-tolerant quantum computers.

quant-pharXiv:2512.09863•Dec 11, 2025•0 citations
Efficient decoding to estimate error locations from outcomes of syndrome measurements is the prerequisite for quantum error correction. Decoding in the presence of circuit-level noise including measurement errors should be considered in case of actual quantum computing devices. In this paper, we develop a decoder for circuit-level noise that solves the error estimation problems as Ising-type optimization problems. We confirm that the threshold theorem in the surface code under circuit-level noise is reproduced with an error threshold of approximately 0.4%. We also demonstrate the advantage of the decoder through which the YYY error detection rate can be improved compared with other matching-based decoders. Our results reveal that a lower logical error rate can be obtained using our algorithm compared with that of the minimum-weight perfect matching algorithm.
Surface codes exploit topological protection to increase error resilience in quantum computing devices and can in principle be implemented in existing hardware. They are one of the most promising candidates for active error correction, not least due to a polynomial-time decoding algorithm which admits one of the highest predicted error thresholds. We consider the dependence of this threshold on underlying assumptions including different noise models, and analyze the performance of a minimum weight perfect matching (MWPM) decoding compared to a mathematically optimal maximum likelihood (ML) decoding. Our ML algorithm tracks the success probabilities for all possible corrections over time and accounts for individual gate failure probabilities and error propagation due to the syndrome measurement circuit. We present the very first evidence for the true error threshold of an optimal circuit level decoder, allowing us to draw conclusions about what kind of improvements are possible over standard MWPM.
Abstract. Suppressing qubit errors is one of the main challenges in building fault-tolerant quantum computers, requiring quantum error correction to protect fragile quantum information during computation cycles. The surface code is a leading approach because of its high error tolerance and compatibility with realistic hardware, but it requires a decoder that can accurately and quickly use the syndrome measurements to discern whether a logical error has occurred. This study investigates whether a feedforward neural-network can serve as a practical decoder for the surface code under circuit-level noise. Using the Stim software package, this study generates surface code circuits at multiple code distances and physical error rates and compiles them into detector samplers, then trains a PyTorch neural-network to predict whether a logical observable flip occurred from the syndrome data. The neural-network decoder is compared against Minimum-Weight Perfect Matching (MWPM), focusing on metrics including logical error rate and inference speed. The results show that the neural-network decoder performs competitively with MWPM for code distances 3 and 5 and provides inference time advantages at higher physical error rates as its inference time remains relatively constant over increasing physical error rates. However, MWPM outperforms the neural-network at distance 7, suggesting that scalability remains a major limitation for neural-network decoders. These results show that neural-networks are a promising approach for tackling quantum error correction, although future work is still needed to improve these models for real systems at larger code distances.
Quantum computers require error correction to achieve universal quantum computing. However, current decoding of quantum error-correcting codes relies on classical computation, which is slower than quantum operations in superconducting qubits. This discrepancy makes the practical implementation of real-time quantum error correction challenging. In this work, we propose a decoding scheme that leverages the operations of the quantum circuit itself. Given a noisy quantum circuit AAA, we train a decoding quantum circuit BBB using syndrome measurements to identify the logical operators needed to correct errors in circuit AAA. The trained quantum circuit BBB can be deployed on quantum devices, such as superconducting qubits, to perform real-time decoding and error correction. Our approach is applicable to general quantum codes with multiple logical qubits and operates efficiently under various noise conditions, and the decoding speed matches the speed of the quantum circuits being corrected. We have conducted numerical experiments using surface codes up to distance 7 under circuit-level noise, demonstrating performance on par with the classical minimum-weight perfect matching algorithm. Interestingly, our method reveals that the traditionally classical task of decoding error-correcting codes can be accomplished without classical devices or measurements. This insight paves the way for the development of self-correcting quantum computers.
Errors in surface code have typically been decoded by Minimum Weight Perfect Matching (MWPM) based method. Recently, neural-network-based Machine Learning (ML) techniques have been employed for this purpose. Here we propose a two-level (low and high) ML-based decoding scheme, where the first level corrects errors on physical qubits and the second one corrects any existing logical errors, for different noise models. Our results show that our proposed decoding method achieves ∼10×\sim10 \times∼10× and ∼2×\sim2 \times∼2× higher values of pseudo-threshold and threshold respectively, than for MWPM. We show that usage of more sophisticated ML models with higher training/testing time, do not provide significant improvement in the decoder performance. Finally, data generation for training the ML decoder requires significant overhead hence lower volume of training data is desirable. We have shown that our decoder maintains a good performance with the train-test-ratio as low as 40:6040:6040:60.
Noise in quantum computing is countered with quantum error correction. Achieving optimal performance will require tailoring codes and decoding algorithms to account for features of realistic noise, such as the common situation where the noise is biased towards dephasing. Here we introduce an efficient high-threshold decoder for a noise-tailored surface code based on minimum-weight perfect matching. The decoder exploits the symmetries of its syndrome under the action of biased noise and generalizes to the fault-tolerant regime where measurements are unreliable. Using this decoder, we obtain fault-tolerant thresholds in excess of 6% for a phenomenological noise model in the limit where dephasing dominates. These gains persist even for modest noise biases: we find a threshold of ∼5% in an experimentally relevant regime where dephasing errors occur at a rate 100 times greater than bit-flip errors.
Quantum error mitigation (QEM) is typically viewed as a suite of practical techniques for today's noisy intermediate-scale quantum devices, with limited relevance once fault-tolerant quantum computers become available. In this work, we challenge this conventional wisdom by showing that QEM can continue to provide substantial benefits in the era of quantum error correction (QEC), and in an even more efficient manner than it does on current devices. We introduce a framework for logical-level QEM that leverages soft information naturally produced by QEC decoders, requiring no additional data, hardware modifications, or runtime overhead beyond what QEC protocols already provide. Within this framework, we develop and analyze three logical-level QEM techniques: post-selection and runtime abort policies, probabilistic error cancellation, and zero-noise extrapolation. Our techniques reduce logical error rates by more than 100x while discarding fewer than 0.1% of shots; they also provide in situ characterization of logical channels for QEM protocols. As a proof of principle, we benchmark our approach using a surface-code architecture and two state-of-the-art decoders based on tensor-network contraction and minimum-weight perfect matching. We evaluate logical-level QEM on random Clifford circuits and molecular simulation algorithms and find that, compared to previous approaches relying on QEC only or QEC combined with QEM, we can achieve up to 87.4% spacetime overhead savings. Our results demonstrate that logical-level QEM with QEC decoder soft information can reliably improve logical performance, underscoring the efficiency and usefulness of QEM techniques for fault-tolerant quantum computers.