A major challenge in the field of correlated electrons is the computation of dynamical correlation functions. For comparisons with experiment, one is interested in their real-frequency dependence. This is difficult to compute because imaginary-frequency data from the Matsubara formalism require analytic continuation, a numerically ill-posed problem. Here, we apply quantum field theory to the single-impurity Anderson model using the Keldysh instead of the Matsubara formalism with direct access to the self-energy and dynamical susceptibilities on the real-frequency axis. We present results from the functional renormalization group (fRG) at the one-loop level and from solving the self-consistent parquet equations in the parquet approximation. In contrast with previous Keldysh fRG works, we employ a parametrization of the four-point vertex which captures its full dependence on three real-frequency arguments. We compare our results to benchmark data obtained with the numerical renormalization group and to second-order perturbation theory. We find that capturing the full frequency dependence of the four-point vertex significantly improves the fRG results compared with previous implementations, and that solving the parquet equations yields the best agreement with the numerical renormalization group benchmark data but is only feasible up to moderate interaction strengths. Our methodical advances pave the way for treating more complicated models in the future.
A major challenge in the field of correlated electrons is the computation of dynamical correlation functions. For comparisons with experiment, one is interested in their real-frequency dependence. This is difficult to compute because imaginary-frequency data from the Matsubara formalism require analytic continuation, a numerically ill-posed problem. Here, we apply quantum field theory to the single-impurity Anderson model using the Keldysh instead of the Matsubara formalism with direct access to the self-energy and dynamical susceptibilities on the real-frequency axis. We present results from the functional renormalization group (fRG) at the one-loop level and from solving the self-consistent parquet equations in the parquet approximation. In contrast with previous Keldysh fRG works, we employ a parametrization of the four-point vertex which captures its full dependence on three real-frequency arguments. We compare our results to benchmark data obtained with the numerical renormalization group and to second-order perturbation theory. We find that capturing the full frequency dependence of the four-point vertex significantly improves the fRG results compared with previous implementations, and that solving the parquet equations yields the best agreement with the numerical renormalization group benchmark data but is only feasible up to moderate interaction strengths. Our methodical advances pave the way for treating more complicated models in the future.
We provide a detailed exposition of our computational framework designed for the accurate calculation of real-frequency dynamical correlation functions of the single-impurity Anderson model in the regime of weak to intermediate coupling. Using quantum field theory within the Keldysh formalism to directly access the self-energy and dynamical susceptibilities in real frequencies, as detailed in our recent publication [Ge et al., Phys. Rev. B 109, 115128 (2024)], the primary computational challenge is the full three-dimensional real-frequency dependence of the four-point vertex. Our codebase provides a fully MPI+OpenMP parallelized implementation of the functional renormalization group (fRG) and the self-consistent parquet equations within the parquet approximation. It leverages vectorization to handle the additional complexity imposed by the Keldysh formalism, using optimized data structures and highly performant integration routines. Going beyond the results shown in the previous publication, the code includes functionality to perform fRG calculations in the multiloop framework, up to arbitrary loop order, including self-consistent self-energy iterations. Moreover, implementations of various regulators, such as hybridization, interaction, frequency, and temperature, are supplied.
We investigate nonequilibrium properties of the single-impurity Anderson model by means of the functional renormalization group (fRG) within Keldysh formalism. We present how the level broadening $\ensuremath{\Gamma}/2$ can be used as flow parameter for the fRG. This choice preserves important aspects of the Fermi-liquid behavior that the model exhibits in case of particle-hole symmetry. An approximation scheme for the Keldysh fRG is developed which accounts for the frequency dependence of the two-particle vertex in a way similar but not equivalent to a recently published approximation to the equilibrium Matsubara fRG. Our method turns out to be a flexible tool for the study of weak to intermediate on-site interactions $U\ensuremath{\lesssim}3\ensuremath{\Gamma}$. In equilibrium we find excellent agreement with numerical RG results for the linear conductance at finite gate voltage, magnetic field, and temperature. In nonequilibrium, our results for the current agree well with time-dependent density-matrix RG. For the nonlinear conductance as function of the bias voltage, we propose reliable results at finite magnetic field and finite temperature. Furthermore, we demonstrate the exponentially small scale of the Kondo temperature to appear in the second-order derivative of the self-energy. We show that the approximation is, however, not able to reproduce the scaling of the effective mass at large interactions.
The many-body problem is usually approached from one of two perspectives: the first originates from an action and is based on Feynman diagrams, the second is centered around a Hamiltonian and deals with quantum states and operators.The connection between results obtained in either way is made through spectral (or Lehmann) representations, well known for two-point correlation functions.Here, we complete this picture by deriving generalized spectral representations for multipoint correlation functions that apply in all of the commonly used many-body frameworks: the imaginary-frequency Matsubara and the realfrequency zero-temperature and Keldysh formalisms.Our approach separates spectral from time-ordering properties and thereby elucidates the relation between the three formalisms.The spectral representations of multipoint correlation functions consist of partial spectral functions and convolution kernels.The former are formalism independent but system specific; the latter are system independent but formalism specific.Using a numerical renormalization group method described in the accompanying paper, we present numerical results for selected quantum impurity models.We focus on the four-point vertex (effective interaction) obtained for the single-impurity Anderson model and for the dynamical mean-field theory solution of the one-band Hubbard model.In the Matsubara formalism, we analyze the evolution of the vertex down to very low temperatures and describe the crossover from strongly interacting particles to weakly interacting quasiparticles.In the Keldysh formalism, we first benchmark our results at weak and infinitely strong interaction and then reveal the rich real-frequency structure of the dynamical mean-field theory vertex in the coexistence regime of a metallic and insulating solution.
Recently, it has become possible to compute real-frequency four-point correlation functions of quantum impurity models using a multipoint extension of the numerical renormalization group (mpNRG). In this work, we perform several numerical consistency checks of the output of mpNRG by investigating exact relations between two- and four-point functions. This includes the Bethe-Salpeter equations and the Schwinger-Dyson equation from the parquet formalism, which we evaluate in two formally identical but numerically nonequivalent ways. We also study the first-order U(1) Ward identity between the vertex and the self-energy for the first time in full generality in the real-frequency Keldysh formalism. We generally find good agreement of all relations, often up to a few percent, both at weak and at strong interaction.
An essential role for the description of correlated quantum many-particle systems is played by impurity problems. These consist of a small number of localized orbitals, where the electrons are subject to a Coulomb-interaction, coupled to noninteracting bath degrees of freedom. Impurity models are used for the description of magnetic impurities in metals, of quantum points in nanostructures, and in the context of the dynamical mean field theory (DMFT). For their solution a large number of numerical methods exists. We mention here quantum Monte Carlo methods, the numerical renormalization group, or the exact diagonalization method. In this thesis we introduce a new approach to impurity problems, which is based on the functional renormalization group (fRG). In contrast to the methods mentioned above this approach is approximative, but it can be applied with comparatively lower numerical effort. The aim of this thesis is to examine the advantages and limits of this method. An important role in this connection is played by the single impurity Anderson model (SIAM), which is already understood very well with other methods and is seen as a prototype for models with strong local correlations. The spin fluctuations of this model are governed by the so-called Kondo energy scale and a central question of this thesis is whether this scale can be reproduced with our approach. We begin with a short introduction to the Green's function formalism for correlated quantum many particle systems. Then the fRG flow equations for the one-particle irreducible vertex functions are deduced, and several approximation schemes are discussed. In chapter 4 we introduce the fRG scheme used in this thesis. At first the SIAM is mapped to a semi-infinite chain, in which the interacting orbital is given by the first site of this chain. The system is then subdivided into two parts. The first part, which is called 'core', consists of the interacting orbital and the first L bath sites. The remaining bath sites form the second part. At the beginning both parts are decoupled from each other such that the core can be solved exactly. Starting with this exact solution the coupling between the core and the remaining bath sites is switched on slowly in a renormalization group flow. This way it is possible to calculate the one-particle and two-particle correlation functions on the correlated site. We call this flow scheme 'hybridization flow'. The flow equations are formulated in an effective theory on the first bath site outside the core, which turns out to be advantageous compared to other implementations of the hybridization flow. In chapter 5 this hybridization flow method is applied to the SIAM with semi-elliptic bath density of states. We discuss the differences which arise for different core-sizes (L = 0,1,2,3) and for different truncations of the fRG flow equations. In the cases L=0 and L=2 the local Fermi liquid properties of the SIAM and the associated Kondo scale can not be reproduced in both approximation schemes. For the core sizes L=1 and L=3 the ground state of the core is already a spin singlet state in the beginning of the flow and the Fermi liquid properties are reproduced. The Kondo energy scale, which determines the width of the central quasi-particle peak and the size of the local spin-susceptibility, is however not accurately resolved. This is partly due to the finite temperature used in our implementation such that for larger interaction strength the temperature is above the Kondo energy scale. The application of the hybridization flow method to quantum impurity problems in the context of the DMFT is discussed in chapter 6. In this approach lattice models with a local interaction, like the Hubbard model, are mapped to an effective impurity problem for a single lattice site embedded in a dynamical mean field representing the influence of the other electrons. This scheme is exact in infinitely many dimensions and a nonperturbative approximation method for finite-dimensional systems. In particular the Mott metal-insulator transition in the Hubbard model is successfully described by this method. One class of quantities, which is easily accessible from the hybridization flow scheme, is given by the local two-particle correlation functions. These play an essential role in non-local extensions of the DMFT. Therefore we mainly focus on these quantities. At first we apply our flow scheme to the Hubbard model on the Bethe lattice in infinite dimensions and calculate the local one-particle irreducible vertex functions in the insulating and the metallic phase in good agreement with previous calculations, which use the exact diagonalization method as impurity solver. After this we extend our flow scheme to a cluster DMFT method, which includes short-range antiferromagnetic correlations and calculate again the local and non-local vertex functions for the two-dimensional Hubbard model. We compare these to the results of the single-site DMFT.
Strongly correlated electron systems host a plethora of fascinating physical phenomena and pose formidable challenges in their theoretical analysis. The challenges originate from the inherent complexity of the quantum many-body problem - no classical computer will ever be able to fully simulate these systems - and the lack of an effective single-particle picture, as the strong mutual interactions make it impossible to regard the electrons as independent from each other. As a consequence, most systems of correlated electrons can only be tackled approximately and numerically. In this thesis, we develop a set of numerical methods for strongly correlated electrons, which are inspired by the renormalization group (RG) idea of including degrees of freedom successively from high to low energies. This enables an efficient organization of the diverse fluctuations and is key for an accurate treatment of interacting quantum systems, where collective behavior and composite objects emerge at energy scales far below those of the microscopic constituents. In a first part, we consider the functional renormalization group (fRG), a versatile framework to study the flow of correlation functions upon modulating the underlying action. Though widely used, it has often acted more as a qualitative rather than quantitative method, due a nontransparent approximation induced by truncating the hierarchy of flow equations. We develop an iterative multiloop fRG (mfRG) scheme, which ameliorates this approximation and eliminates many of the drawbacks of fRG experienced hitherto. In particular, it restores the independence of results on the choice of RG regulator and establishes a rigorous relation to the parquet formalism. Furthermore, we show how to derive the flow equations directly from self-consistent many-body relations. This establishes a form of diagrammatic resummations at the two-particle level which circumvents ill-behaved two-particle-irreducible vertices. An application to the prototypical two-dimensional Hubbard model illustrates how our multiloop scheme elevates the fRG approach to correlated electron systems to a quantitative level. Secondly, we employ the numerical renormalization group (NRG), based on the iterative diagonalization of impurity Hamiltonians, in conjunction with the dynamical mean-field theory (DMFT) to describe local correlations in multiorbital systems. Having access to arbitrarily low temperatures and energies, NRG is a unique, real-frequency impurity solver for DMFT. It has been pivotal to the understanding of Hund metals, where strong correlations arise from Hund's rules even at moderate Coulomb repulsion. Building on recent methodological advances, we extend the range of application of DMFT+NRG from orbital-degenerate models to more realistic setups: We first study orbital differentiation in a three-orbital Hund-metal model and unravel key effects of the orbital-selective Mott transition. In a real-materials setting, we then incorporate the bandstructure from density functional theory (DFT) and analyze the archetypal Hund-metal material Sr2RuO4. We particularly follow its RG flow to the Fermi-liquid regime at previously inaccessible low temperatures and generally present DFT+DMFT+NRG as a new computational paradigm for strongly correlated materials. As a side project of our fRG work, we develop an algorithm to count Feynman diagrams from closed many-body relations, which reveals the surprising outcome that totally irreducible contributions are responsible for the factorial growth in the number of diagrams. Additionally, we use NRG to study transport through three-level quantum dots and provide benchmark data for other RG methods, which aim at further describing these systems in nonequilibrium.