The development of practical, high-performance decoding algorithms reduces the resource cost of fault-tolerant quantum computing. Here we propose a decoder for the surface code that finds low-weight correction operators for errors produced by the depolarising noise model. The decoder is obtained by mapping the syndrome of the surface code onto that of the color code, thereby allowing us to adopt more sophisticated color-code decoding algorithms. Analytical arguments and exhaustive testing show that the resulting decoder can find a least-weight correction for all weight d/2 depolarising errors for even code distance d . This improves the logical error rate by an exponential factor O(2d/2) compared with decoders that treat bit-flip and dephasing errors separately. We demonstrate this improvement with analytical arguments and supporting numerical simulations at low error rates. Of independent interest, we also demonstrate an exponential improvement in logical error rate for our decoder used to correct independent and identically distributed bit-flip errors affecting the color code compared with more conventional color-code decoding algorithms.
The development of practical, high-performance decoding algorithms reduces the resource cost of fault-tolerant quantum computing. Here we propose a decoder for the surface code that finds low-weight correction operators for errors produced by the depolarising noise model. The decoder is obtained by mapping the syndrome of the surface code onto that of the color code, thereby allowing us to adopt more sophisticated color-code decoding algorithms. Analytical arguments and exhaustive testing show that the resulting decoder can find a least-weight correction for all weight d/2 depolarising errors for even code distance d . This improves the logical error rate by an exponential factor O(2d/2) compared with decoders that treat bit-flip and dephasing errors separately. We demonstrate this improvement with analytical arguments and supporting numerical simulations at low error rates. Of independent interest, we also demonstrate an exponential improvement in logical error rate for our decoder used to correct independent and identically distributed bit-flip errors affecting the color code compared with more conventional color-code decoding algorithms.
Two-dimensional color codes are a promising candidate for fault-tolerant quantum computing, as they have high encoding rates, transversal implementation of logical Clifford gates, and resource-efficient magic state preparation schemes. However, decoding color codes presents a significant challenge due to their structure, where elementary errors violate three checks instead of just two (a key feature in surface code decoding), and the complexity of extracting syndrome is greater. We introduce an efficient color-code decoder that tackles these issues by combining two matching decoders for each color, generalized to handle circuit-level noise by employing detector error models. We provide comprehensive analyses of the decoder, covering its threshold and sub-threshold scaling both for bit-flip noise with ideal measurements and for circuit-level noise. Our simulations reveal that this decoding strategy nearly reaches the best possible scaling of logical failure ( pfail∼pd/2 ) for both noise models, where p is the noise strength, in the regime of interest for fault-tolerant quantum computing. While its noise thresholds are comparable with other matching-based decoders for color codes ( 8.2% for bit-flip noise and 0.46% for circuit-level noise), the scaling of logical failure rates below threshold significantly outperforms the best matching-based decoders.
Color codes present distinct advantages for fault-tolerant quantum computing, such as high encoding rates and the transversal implementation of Clifford gates. However, existing matching-based decoders for the color codes such as the restricted decoder (Kubica and Delfosse, 2023), suffer from limited decoding performance. Inspired by the global decoding insight of the unified decoder (Benhemou et al., 2023), this paper introduces a correlated decoder for the 4.8.8 color code, which improves upon the conventional restricted decoder by leveraging correlations between restricted lattices, and is derived by mapping the correlated matching decoder for the surface code onto the color code lattice. Analytical and numerical results show that the correlated decoder achieves higher thresholds than the restricted and unified decoders, while matching the performance of the unified decoder at very low physical error rates. Under the code capacity and phenomenological noise models, the estimated thresholds for the color code against bit-flip error are 10.38% and 3.13%, respectively. Furthermore, by applying the surface-color code mapping, the thresholds of 16.62% and 3.52% are obtained for the surface code against depolarizing noise.
Quantum error correction is an essential ingredient for reliable quantum computation for theoretically provable quantum speedup. Topological color codes, one of the quantum error correction codes, have an advantage against the surface codes in that all Clifford gates can be implemented transversally. However, the hardness of decoding makes the color codes not suitable as the best candidate for experimentally feasible implementation of quantum error correction. Here we propose an Ising model formulation that enables highly accurate decoding of the color codes. In this formulation, we map stabilizer operators to classical spin variables to represent an error satisfying the syndrome. Then we construct an Ising Hamiltonian that counts the number of errors and formulate the decoding problem as an energy minimization problem of an Ising Hamiltonian, which is solved by simulated annealing. In numerical simulations on the (4.8.8) lattice, we find an error threshold of 10.36(5)% for bit-flip noise model, 18.47(5)% for depolarizing noise model, and 2.90(4)% for phenomenological noise model (bit-flip error is located on each of data and measurement qubits), all of which are higher than the thresholds of existing efficient decoding algorithms. Furthermore, we verify that the achieved logical error rates are almost optimal in the sense that they are almost the same as those obtained by exact optimizations by CPLEX with smaller decoding time in many cases. Since the decoding process has been a bottleneck for performance analysis, the proposed decoding method is useful for further exploration of the possibility of the topological color codes. Published by the American Physical Society 2024
The development and use of large-scale quantum computers relies on integrating quantum error-correcting (QEC) schemes into the quantum computing pipeline. A fundamental part of the QEC protocol is the decoding of the syndrome to identify a recovery operation with a high success rate. In this work, we implement a decoder that finds the recovery operation with the highest success probability by mapping the decoding problem to a spin system and using Population Annealing to estimate the free energy of the different error classes. We study the decoder performance on a 4.8.8 color code lattice under different noise models, including code capacity with bit-flip and depolarizing noise, and phenomenological noise, which considers noisy measurements, with performance reaching near-optimal thresholds for bit-flip and depolarizing noise, and the highest reported threshold for phenomenological noise. This decoding algorithm can be applied to a wide variety of stabilizer codes, including surface codes and quantum Low-Density Parity Check (qLDPC) codes.
Topological color codes defined by the 4.8.8 semiregular lattice feature geometrically local check operators and admit transversal implementation of the entire Clifford group, making them promising candidates for fault-tolerant quantum computation. Recently, several efficient algorithms for decoding the syndrome of color codes were proposed. Here, we modify one of these algorithms to account for errors affecting the syndrome, applying it to the family of triangular 4.8.8 color codes encoding one logical qubit. For a three-dimensional bit-flip channel, we report a threshold error rate of 0.0208(1), compared with 0.0305(4) previously reported for an integer-program-based decoding algorithm. When we account for circuit details, this threshold is reduced to 0.00143(1) per gate, compared with 0.00672(1) per gate for the surface code under an identical noise model.
Color codes are promising alternatives to surface codes for universal fault-tolerant quantum computing due to their simpler lattice-surgery protocols and the transversal implementation of logical Clifford gates. However, their practical deployment has been limited by slower decoding algorithms and worse logical failure rates and thresholds compared to surface codes. Although AI-based logical-flip decoders have recently been proposed to address these challenges, no clear framework currently exists for implementing such decoders within the parallel block-wise decoding schemes in both space and time required for large-scale fault-tolerant computation. AI-based pre-decoders offer a scalable alternative due to their local nature. By performing spacelike corrections on physical qubits and timelike corrections on stabilizer measurements, pre-decoders are naturally compatible with parallel block-wise decoding schemes and lattice-surgery protocols. In this work, we introduce AI-based pre-decoders for triangular color codes. We present a novel neural-network architecture for their implementation and develop methods to simplify the complex training data generated by color-code syndrome-extraction circuits containing feedforward operations. Remarkably, we find that both logical failure rates (LERs) and runtimes improve relative to raw Chromobius decoding as the code distance increases. For example, at code distance d=31 and physical error rate p=0.3%, our pre-decoder + Chromobius pipeline improves the logical failure rate by a factor of 347x while reducing runtime by 7.33x compared to raw Chromobius decoding alone. These results demonstrate that AI-based pre-decoding can substantially narrow the performance gap between color codes and surface codes, bringing color codes closer to practical large-scale fault-tolerant quantum computation.