Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2306.13021

Modelling non-Markovian noise in driven superconducting qubits

Abhishek Agarwal, Lachlan P. Lindoy, Deep Lall, François Jamet, Ivan Rungger

Published Jun 22, 2023• 0 citations
arXivHTMLPDF

Abstract

Non-Markovian noise can be a significant source of errors in superconducting qubits. We develop gate sequences utilising mirrored pseudoidentities that allow us to characterise and model the effects of non-Markovian noise on both idle and driven qubits. We compare three approaches to modelling the observed noise: (i) a Markovian noise model, (ii) a model including interactions with a two-level system (TLS), (iii) a model utilising the post Markovian master equation (PMME), which we show to be equivalent to the qubit-TLS model in certain regimes. When running our noise characterisation circuits on a superconducting qubit device we find that purely Markovian noise models cannot reproduce the experimental data. Our model based on a qubit-TLS interaction, on the other hand, is able to closely capture the observed experimental behaviour for both idle and driven qubits. We investigate the stability of the noise properties of the hardware over time, and find that the parameter governing the qubit-TLS interaction strength fluctuates significantly even over short time-scales of a few minutes. Finally, we evaluate the changes in the noise parameters when increasing the qubit drive pulse amplitude. We find that although the hardware noise parameters fluctuate significantly over different days, their drive pulse induced relative variation is rather well defined within computed uncertainties: both the phase error and the qubit-TLS interaction strength change significantly with the pulse strength, with the phase error changing quadratically with the amplitude of the applied pulse. Since our noise model can closely describe the behaviour of idle and driven qubits, it is ideally suited to be used in the development of quantum error mitigation and correction methods.

DOI
10.48550/arxiv.2306.13021

Related papers

Modelling non-Markovian noise in driven superconducting qubits

Abhishek Agarwal, Lachlan P. Lindoy, Deep Lall +2 more

Abstract Non-Markovian noise can be a significant source of errors in superconducting qubits. We develop gate sequences utilising mirrored pseudoidentities that allow us to characterise and model the effects of non-Markovian noise on both idle and driven qubits. We compare three approaches to modelling the observed noise: (i) a Markovian noise model, (ii) a model including interactions with a two-level system (TLS), (iii) a model utilising the post Markovian master equation, which we show to be equivalent to the qubit-TLS model in certain regimes. When running our noise characterisation circuits on a superconducting qubit device we find that purely Markovian noise models cannot reproduce the experimental data. Our model based on a qubit-TLS interaction, on the other hand, is able to closely capture the observed experimental behaviour for both idle and driven qubits. We investigate the stability of the noise properties of the hardware over time, and find that the parameter governing the qubit-TLS interaction strength fluctuates significantly even over short time-scales of a few minutes. Finally, we evaluate the changes in the noise parameters when increasing the qubit drive pulse amplitude. We find that although the hardware noise parameters fluctuate significantly over different days, their drive pulse induced relative variation is rather well defined within computed uncertainties: both the phase error and the qubit-TLS interaction strength change significantly with the pulse strength, with the phase error changing quadratically with the amplitude of the applied pulse. Since our noise model can closely describe the behaviour of idle and driven qubits, it is ideally suited to be used in the development of quantum error mitigation and correction methods.

Quantum Science and Technology•Apr 11, 2024•23 citations

Time-resolved noise characterisation tool to track fluctuating noise effects in superconducting qubits

Abhishek Agarwal, Lachlan Lindoy, Deep Lall +2 more

Superconducting qubits have seen rapid increases in their coherence in the last few decades. However, instability in qubit parameters and their noise environment remains as a major challenge that limits the device performance. Qubit metrology to collectively measure and characterise different sources of noise and fluctuations is essential for accurately benchmarking devices but can be challenging, and typically different noise sources are characterised independently. In order to characterise the combined noise, we develop a tool that uses few-measurement data to detect and diagnose noise fluctuations, as well as a time series segmentation tool to further disambiguate different sources of fluctuations. We demonstrate the tool by computing time resolved properties of individual superconducting qubits. We find large changes of the dominating noise contributions, such as qubit frequency fluctuations, over both long time-scales of hours and days, and also over very short milli-seconds time-scales. We show that this information can be used alongside accurate noise models to learn physical properties of the coupled noise sources as well as benchmark device stability.

•Jan 1, 2025•0 citations

Simulation of one and two qubit superconducting quantum gates under the non-Markovian $1/f$ noise

Yinjia Chen, Shuocang Zhang, Qiang Shi

Non-Markovian $1/f$ noise consists a dominant source of decoherence in superconducting qubits, yet its slow nature poses a significant challenge for accurate simulation. Here we develop a hierarchical equations of motion (HEOM) framework that enables efficient and reliable modeling of qubit dynamics and gate operations under $1/f$ noise. By using the approach, it is first shown that perturbative quantum master equations may fail to reproduce the correct dephasing dynamics of a qubit coupled to slow baths. We then analyze dynamical decoupling sequences by including effects of finite pulse duration. It is found that different pulse sequences results in different behavior in error accumulation: all X-CPMG sequences exhibit linear scaling with parity effects, Y-CPMG follows quadratic growth, and alternating XY-type sequences can suppress the error accumulation significantly. Finally, we extend the framework to two-qubit cross-resonance (CR) gates, reconstructing the full Choi matrix and Pauli Transfer Matrix (PTM) to identify the incoherent error induced by $1/f$ noise. Together, these results establish HEOM as a robust methodology for simulating the environmental noise in superconducting circuits and provide new insights into error mechanisms in both single- and two-qubit gates.

arXiv:2509.07693•Sep 9, 2025•0 citations

Probing Qubit Noise with a Channel-Resolved Post-Markovian Master Equation

Chun-Tse Li, J.G. Zhang C.L. Tan, Vasil Gucev +1 more

Accurate noise characterization is essential for scaling quantum processors toward fault-tolerant operation. Although reduced qubit dynamics are often modeled with Markovian master equations, present-day devices can exhibit memory effects generated by residual qubit-qubit couplings, structured environments, and finite bath correlation times. Here we develop a channel-resolved, Post-Markovian Master Equation model for non-Markovian noise and test it in superconducting qubits. Using idle-evolution tomography on IBM Quantum processors, we identify complementary operational signatures of non-Markovianity, including violations of CP-divisibility and revivals of distinguishability-based information-backflow measures. We further derive a closed-form spectator-$ZZ$ model with local dissipation and show that it captures the observed transverse Bloch-vector revivals while leaving the longitudinal relaxation mode Markovian within the model. The fitted closed-form dynamics enable an analytical reconstruction of the transverse memory kernel, whose damped oscillatory structure captures the non-Markovian correction beyond the fitted Markovian baseline. Two-qubit tomography shows buildup and revivals of quantum mutual information on comparable timescales, supporting spectator-induced crosstalk as an important contributor to the observed memory effects. Our results connect operational non-Markovianity diagnostics, microscopic crosstalk modeling, and reduced memory-kernel reconstruction in a single experimental framework for superconducting quantum hardware.

arXiv:2510.12894•Oct 14, 2025•0 citations

Demonstration of non-Markovian process characterisation and control on a quantum processor

G. A. L. White, Charles D. Hill, F. A. Pollock +2 more

Abstract In the scale-up of quantum computers, the framework underpinning fault-tolerance generally relies on the strong assumption that environmental noise affecting qubit logic is uncorrelated (Markovian). However, as physical devices progress well into the complex multi-qubit regime, attention is turning to understanding the appearance and mitigation of correlated — or non-Markovian — noise, which poses a serious challenge to the progression of quantum technology. This error type has previously remained elusive to characterisation techniques. Here, we develop a framework for characterising non-Markovian dynamics in quantum systems and experimentally test it on multi-qubit superconducting quantum devices. Where noisy processes cannot be accounted for using standard Markovian techniques, our reconstruction predicts the behaviour of the devices with an infidelity of 10 −3 . Our results show this characterisation technique leads to superior quantum control and extension of coherence time by effective decoupling from the non-Markovian environment. This framework, validated by our results, is applicable to any controlled quantum device and offers a significant step towards optimal device operation and noise reduction.

arXiv:2004.14018•Nature Communications•Dec 9, 2020•137 citations

Error mitigation with stabilized noise in superconducting quantum processors

Young‐Seok Kim, Luke C. G. Govia, Andrew E. Dane +10 more

Pre-fault tolerant quantum computers have already demonstrated the ability to estimate observable values accurately, at a scale beyond brute-force classical computation. This has been enabled by error mitigation techniques that often rely on a representative model of the device noise. However, learning and maintaining these models is complicated by fluctuations in the noise over unpredictable time scales, for instance, arising from resonant interactions between superconducting qubits and defect two-level systems (TLS). Such interactions affect the stability and uniformity of device performance as a whole, but also affect the noise model accuracy, leading to incorrect observable estimation. Here, we experimentally demonstrate that tuning of the qubit-TLS interactions helps reduce noise instabilities and consequently enables more reliable error-mitigation performance. These experiments provide a controlled platform for studying the performance of error mitigation in the presence of quasi-static noise. We anticipate that the capabilities introduced here will be crucial for the exploration of quantum applications on solid-state processors at non-trivial scales. Interactions between qubits and defect-related two-level systems in superconducting qubit devices are a major source of noise fluctuations that hinder error-mitigation performance. Here, the authors experimentally show that modulating this interaction can reduce noise fluctuation and improve error mitigation performance.

Nature Communications•Sep 26, 2025•11 citations
Non-Markovian noise can be a significant source of errors in superconducting qubits. We develop gate sequences utilising mirrored pseudoidentities that allow us to characterise and model the effects of non-Markovian noise on both idle and driven qubits. We compare three approaches to modelling the observed noise: (i) a Markovian noise model, (ii) a model including interactions with a two-level system (TLS), (iii) a model utilising the post Markovian master equation (PMME), which we show to be equivalent to the qubit-TLS model in certain regimes. When running our noise characterisation circuits on a superconducting qubit device we find that purely Markovian noise models cannot reproduce the experimental data. Our model based on a qubit-TLS interaction, on the other hand, is able to closely capture the observed experimental behaviour for both idle and driven qubits. We investigate the stability of the noise properties of the hardware over time, and find that the parameter governing the qubit-TLS interaction strength fluctuates significantly even over short time-scales of a few minutes. Finally, we evaluate the changes in the noise parameters when increasing the qubit drive pulse amplitude. We find that although the hardware noise parameters fluctuate significantly over different days, their drive pulse induced relative variation is rather well defined within computed uncertainties: both the phase error and the qubit-TLS interaction strength change significantly with the pulse strength, with the phase error changing quadratically with the amplitude of the applied pulse. Since our noise model can closely describe the behaviour of idle and driven qubits, it is ideally suited to be used in the development of quantum error mitigation and correction methods.
Abstract Non-Markovian noise can be a significant source of errors in superconducting qubits. We develop gate sequences utilising mirrored pseudoidentities that allow us to characterise and model the effects of non-Markovian noise on both idle and driven qubits. We compare three approaches to modelling the observed noise: (i) a Markovian noise model, (ii) a model including interactions with a two-level system (TLS), (iii) a model utilising the post Markovian master equation, which we show to be equivalent to the qubit-TLS model in certain regimes. When running our noise characterisation circuits on a superconducting qubit device we find that purely Markovian noise models cannot reproduce the experimental data. Our model based on a qubit-TLS interaction, on the other hand, is able to closely capture the observed experimental behaviour for both idle and driven qubits. We investigate the stability of the noise properties of the hardware over time, and find that the parameter governing the qubit-TLS interaction strength fluctuates significantly even over short time-scales of a few minutes. Finally, we evaluate the changes in the noise parameters when increasing the qubit drive pulse amplitude. We find that although the hardware noise parameters fluctuate significantly over different days, their drive pulse induced relative variation is rather well defined within computed uncertainties: both the phase error and the qubit-TLS interaction strength change significantly with the pulse strength, with the phase error changing quadratically with the amplitude of the applied pulse. Since our noise model can closely describe the behaviour of idle and driven qubits, it is ideally suited to be used in the development of quantum error mitigation and correction methods.
Superconducting qubits have seen rapid increases in their coherence in the last few decades. However, instability in qubit parameters and their noise environment remains as a major challenge that limits the device performance. Qubit metrology to collectively measure and characterise different sources of noise and fluctuations is essential for accurately benchmarking devices but can be challenging, and typically different noise sources are characterised independently. In order to characterise the combined noise, we develop a tool that uses few-measurement data to detect and diagnose noise fluctuations, as well as a time series segmentation tool to further disambiguate different sources of fluctuations. We demonstrate the tool by computing time resolved properties of individual superconducting qubits. We find large changes of the dominating noise contributions, such as qubit frequency fluctuations, over both long time-scales of hours and days, and also over very short milli-seconds time-scales. We show that this information can be used alongside accurate noise models to learn physical properties of the coupled noise sources as well as benchmark device stability.
Simulation of one and two qubit superconducting quantum gates under the non-Markovian 1/f1/f1/f noise
Non-Markovian 1/f1/f1/f noise consists a dominant source of decoherence in superconducting qubits, yet its slow nature poses a significant challenge for accurate simulation. Here we develop a hierarchical equations of motion (HEOM) framework that enables efficient and reliable modeling of qubit dynamics and gate operations under 1/f1/f1/f noise. By using the approach, it is first shown that perturbative quantum master equations may fail to reproduce the correct dephasing dynamics of a qubit coupled to slow baths. We then analyze dynamical decoupling sequences by including effects of finite pulse duration. It is found that different pulse sequences results in different behavior in error accumulation: all X-CPMG sequences exhibit linear scaling with parity effects, Y-CPMG follows quadratic growth, and alternating XY-type sequences can suppress the error accumulation significantly. Finally, we extend the framework to two-qubit cross-resonance (CR) gates, reconstructing the full Choi matrix and Pauli Transfer Matrix (PTM) to identify the incoherent error induced by 1/f1/f1/f noise. Together, these results establish HEOM as a robust methodology for simulating the environmental noise in superconducting circuits and provide new insights into error mechanisms in both single- and two-qubit gates.
Accurate noise characterization is essential for scaling quantum processors toward fault-tolerant operation. Although reduced qubit dynamics are often modeled with Markovian master equations, present-day devices can exhibit memory effects generated by residual qubit-qubit couplings, structured environments, and finite bath correlation times. Here we develop a channel-resolved, Post-Markovian Master Equation model for non-Markovian noise and test it in superconducting qubits. Using idle-evolution tomography on IBM Quantum processors, we identify complementary operational signatures of non-Markovianity, including violations of CP-divisibility and revivals of distinguishability-based information-backflow measures. We further derive a closed-form spectator-ZZZZZZ model with local dissipation and show that it captures the observed transverse Bloch-vector revivals while leaving the longitudinal relaxation mode Markovian within the model. The fitted closed-form dynamics enable an analytical reconstruction of the transverse memory kernel, whose damped oscillatory structure captures the non-Markovian correction beyond the fitted Markovian baseline. Two-qubit tomography shows buildup and revivals of quantum mutual information on comparable timescales, supporting spectator-induced crosstalk as an important contributor to the observed memory effects. Our results connect operational non-Markovianity diagnostics, microscopic crosstalk modeling, and reduced memory-kernel reconstruction in a single experimental framework for superconducting quantum hardware.
Abstract In the scale-up of quantum computers, the framework underpinning fault-tolerance generally relies on the strong assumption that environmental noise affecting qubit logic is uncorrelated (Markovian). However, as physical devices progress well into the complex multi-qubit regime, attention is turning to understanding the appearance and mitigation of correlated — or non-Markovian — noise, which poses a serious challenge to the progression of quantum technology. This error type has previously remained elusive to characterisation techniques. Here, we develop a framework for characterising non-Markovian dynamics in quantum systems and experimentally test it on multi-qubit superconducting quantum devices. Where noisy processes cannot be accounted for using standard Markovian techniques, our reconstruction predicts the behaviour of the devices with an infidelity of 10 −3 . Our results show this characterisation technique leads to superior quantum control and extension of coherence time by effective decoupling from the non-Markovian environment. This framework, validated by our results, is applicable to any controlled quantum device and offers a significant step towards optimal device operation and noise reduction.
Pre-fault tolerant quantum computers have already demonstrated the ability to estimate observable values accurately, at a scale beyond brute-force classical computation. This has been enabled by error mitigation techniques that often rely on a representative model of the device noise. However, learning and maintaining these models is complicated by fluctuations in the noise over unpredictable time scales, for instance, arising from resonant interactions between superconducting qubits and defect two-level systems (TLS). Such interactions affect the stability and uniformity of device performance as a whole, but also affect the noise model accuracy, leading to incorrect observable estimation. Here, we experimentally demonstrate that tuning of the qubit-TLS interactions helps reduce noise instabilities and consequently enables more reliable error-mitigation performance. These experiments provide a controlled platform for studying the performance of error mitigation in the presence of quasi-static noise. We anticipate that the capabilities introduced here will be crucial for the exploration of quantum applications on solid-state processors at non-trivial scales. Interactions between qubits and defect-related two-level systems in superconducting qubit devices are a major source of noise fluctuations that hinder error-mitigation performance. Here, the authors experimentally show that modulating this interaction can reduce noise fluctuation and improve error mitigation performance.