We propose a scheme that can enhance the performance and reduce the computational cost of quantum reservoir computing. Quantum reservoir computing is a computing approach which aims at utilizing the complexity and high dimensionality of small quantum systems, together with the fast trainability of reservoir computing, in order to solve complex tasks. The suitability of quantum reservoir computing for solving temporal tasks is hindered by the collapse of the quantum system when measurements are made. This leads to the erasure of the memory of the reservoir. Hence, for every output, the entire input signal is needed to reinitialize the reservoir, leading to quadratic time complexity. Another critical issue for the hardware implementation of quantum reservoir computing is the need for an experimentally accessible means of tuning the nonlinearity of the quantum reservoir. We present an approach which addresses both of these issues. We propose artificially restricting the memory of the quantum reservoir by only using a small number inputs to reinitialize the reservoir after measurements are performed. This strongly influences the nonlinearity of the reservoir response due to the influence of the initial reservoir state, while also substantially reducing the number of quantum operations needed to perform time-series prediction tasks due to the linear rather than quadratic time complexity. The reinitialization length therefore provides an experimental accessible means of tuning the nonlinearity of the response of the reservoir, which can lead to significant task-specific performance improvement. We numerically study the linear and quadratic algorithms for a fully connected transverse Ising model and a quantum processor model. Published by the American Physical Society 2024
We propose a scheme that can enhance the performance and reduce the computational cost of quantum reservoir computing. Quantum reservoir computing is a computing approach which aims at utilizing the complexity and high dimensionality of small quantum systems, together with the fast trainability of reservoir computing, in order to solve complex tasks. The suitability of quantum reservoir computing for solving temporal tasks is hindered by the collapse of the quantum system when measurements are made. This leads to the erasure of the memory of the reservoir. Hence, for every output, the entire input signal is needed to reinitialize the reservoir, leading to quadratic time complexity. Another critical issue for the hardware implementation of quantum reservoir computing is the need for an experimentally accessible means of tuning the nonlinearity of the quantum reservoir. We present an approach which addresses both of these issues. We propose artificially restricting the memory of the quantum reservoir by only using a small number inputs to reinitialize the reservoir after measurements are performed. This strongly influences the nonlinearity of the reservoir response due to the influence of the initial reservoir state, while also substantially reducing the number of quantum operations needed to perform time-series prediction tasks due to the linear rather than quadratic time complexity. The reinitialization length therefore provides an experimental accessible means of tuning the nonlinearity of the response of the reservoir, which can lead to significant task-specific performance improvement. We numerically study the linear and quadratic algorithms for a fully connected transverse Ising model and a quantum processor model. Published by the American Physical Society 2024
Quantum reservoir computing (QRC) is a highly promising computational paradigm that leverages quantum systems as a computational resource for nonlinear information processing. While its application to time-series analysis is eagerly anticipated, prevailing approaches suffer from the collapse of the quantum state upon measurement, resulting in the erasure of temporal input memories. Neither repeated initializations nor weak measurements offer a fundamental solution, as the former escalates the time complexity while the latter restricts the information extraction from the Hilbert space. To address this issue, we propose the feedback-driven QRC framework. This methodology employs projective measurements on all qubits for unrestricted access to the quantum state, with the measurement outcomes subsequently fed back into the reservoir to restore the memory of prior inputs. We demonstrate that our QRC successfully acquires the fading-memory property through the feedback connections, a critical aspect in time-series processing. Notably, analysis of measurement trajectories reveals three distinct phases depending on the feedback strength, with the memory performance maximized at the edge of chaos. We also evaluate the predictive capabilities of our QRC, demonstrating its suitability for forecasting signals originating from quantum spin systems. Published by the American Physical Society 2024
Reservoir computing (RC) is an effective method for predicting chaotic systems by using a high-dimensional dynamic reservoir with fixed internal weights, while keeping the learning phase linear, which simplifies training and reduces computational complexity compared to fully trained recurrent neural networks (RNNs). Quantum reservoir computing (QRC) uses the exponential growth of Hilbert spaces in quantum systems, allowing for greater information processing, memory capacity, and computational power. However, the original QRC proposal requires coherent injection of inputs multiple times, complicating practical implementation. We present a hybrid quantum-classical approach that implements memory through classical post-processing of quantum measurements. This approach avoids the need for multiple coherent input injections and is evaluated on benchmark tasks, including the chaotic Mackey-Glass time series prediction. We tested our model on two physical platforms: a fully connected Ising model and a Rydberg atom array. The optimized model demonstrates promising predictive capabilities, achieving a higher number of steps compared to previously reported approaches.
Quantum reservoir computing is strongly emerging for sequential and time series data prediction in quantum machine learning. We make advancements to the quantum noise-induced reservoir, in which reservoir noise is used as a resource to generate expressive, nonlinear signals that are efficiently learned with a single linear output layer. We address the need for quantum reservoir tuning with a novel and generally applicable approach to quantum circuit parameterization, in which tunable noise models are programmed to the quantum reservoir circuit to be fully controlled for effective optimization. Our systematic approach also involves reductions in quantum reservoir circuits in the number of qubits and entanglement scheme complexity. We show that with only a single noise model and small memory capacities, excellent simulation results were obtained on nonlinear benchmarks that include the Mackey-Glass system for 100 steps ahead in the challenging chaotic regime.
Quantum reservoir computing (QRC) exploits the information-processing capabilities of quantum systems to tackle time-series forecasting tasks, which is expected to be superior to their classical counterparts. By far, many QRC schemes have been theoretically proposed. However, most of these schemes involve long-time evolution of quantum systems or networks with quantum gates. This poses a challenge for practical implementation of these schemes, as precise manipulation of quantum systems is crucial, and this level of control is currently hard to achieve with the existing state of quantum technology. Here we propose a different QRC scheme, which is friendly to experimental realization. It implements the quantum version of nonlinear vector autoregression, extracting linear and nonlinear features of quantum data by measurements. Thus, the evolution of complex networks of quantum gates can be avoided. Compared to other QRC schemes, our proposal also achieves an advance by effectively reducing the necessary training data for reliable predictions in time-series forecasting tasks. Furthermore, we experimentally verify our proposal by performing the forecasting tasks, and the observation matches well with the theoretical ones. Our work opens up a different way for complex tasks to be solved by using QRC, which can herald the next generation of QRC.
Quantum reservoir computing (QRC) uses the dynamics of a fixed or weakly tuned quantum system to transform temporal and sequential inputs into measured features, while training is typically confined to a classical readout. This separation reduces reliance on repeated quantum parameter updates and avoids the barren plateaus associated with variational circuit training. Its computational power is often attributed to the exponentially large Hilbert space of the quantum system. However, the memory, nonlinearity, and expressivity that determine what a reservoir can actually compute depend jointly on the input encoding, quantum evolution, observables, measurement, and readout, not on Hilbert space dimension alone. On hardware, these capabilities are further constrained by finite sampling, hardware noise, measurement backaction, and the cost of estimating observables, so a large state space alone does not guarantee useful computation. In this survey, we develop a common system model that connects these components and use it to organize QRC foundations, computational properties, reservoir architectures, operating protocols, and physical implementations. We examine spin, photonic, superconducting, bosonic, neutral atom, and other analog platforms, together with applications, software and high performance computing support, benchmarking, and reproducibility. The analysis distinguishes hardware demonstrations from simulations and identifies the assumptions and resources that govern comparisons across implementations. Current results do not establish a broad quantum advantage over well matched classical reservoirs. We therefore specify the resource accounting, benchmark standards, and theoretical criteria needed to evaluate claims of quantum advantage.
Given the challenge of modeling multidimensional dynamical systems, which stems from the complexity of their intrinsic interactions and nonlinear dynamics, reservoir computing (RC) offers a robust framework for time series processing and analyzing. To further enhance the scalability and expressive power of this approach, this work introduces a higher-order quantum reservoir computing (HoQRC) framework. This architecture utilizes a quantum Ising reservoir to harness inherent quantum properties—superposition and entanglement—thereby enhancing computational information processing. Notably, the framework is designed to simultaneously encode both temporal sequences and higher-order structural features at the input layer. In addition, to address NISQ-era hardware limitations, the integrated high-dimensional input is decomposed into subsystems, each processed in parallel by dedicated compact quantum Ising reservoir modules. This strategy reduces peak qubit requirements from scaling with full system dimensionality to scaling with subsystem complexity, thereby mitigating decoherence and noise in practical implementations. Extensive experiments across diverse complex systems validate HoQRC's efficacy, while hyperparameter analyses confirm the critical role of the edge of chaos and global ergodic phase in dynamical modeling. This work establishes algorithmic foundations for the feasible deployment of the HoQRC framework, demonstrating significant potential for application in the study of large-scale complex systems.