Scalability is currently one of the most sought-after objectives in the field of quantum computing. Distributing a quantum circuit across a quantum network is one way to facilitate large computations using current quantum computers. In this paper, we consider the problem of distributing a quantum circuit across a network of heterogeneous quantum computers, while minimizing the number of teleportations (the communication cost) needed to implement gates spanning multiple computers. We design two algorithms for this problem. The first, called Local-Best, initially distributes the qubits across the network, then tries to teleport qubits only when necessary, with teleportations being influenced by gates in the near future. The second, called Zero-Stitching, divides the given circuit into sub-circuits such that each sub-circuit can be executed using zero teleportations and the teleportation cost incurred at the borders of the sub-circuits is minimal. We evaluate our algorithms over a wide range of randomly-generated circuits as well as known benchmarks, and compare their performance to prior work. We observe that our techniques outperform the prior approach by a significant margin (up to 50%).
Scalability is currently one of the most sought-after objectives in the field of quantum computing. Distributing a quantum circuit across a quantum network is one way to facilitate large computations using current quantum computers. In this paper, we consider the problem of distributing a quantum circuit across a network of heterogeneous quantum computers, while minimizing the number of teleportations (the communication cost) needed to implement gates spanning multiple computers. We design two algorithms for this problem. The first, called Local-Best, initially distributes the qubits across the network, then tries to teleport qubits only when necessary, with teleportations being influenced by gates in the near future. The second, called Zero-Stitching, divides the given circuit into sub-circuits such that each sub-circuit can be executed using zero teleportations and the teleportation cost incurred at the borders of the sub-circuits is minimal. We evaluate our algorithms over a wide range of randomly-generated circuits as well as known benchmarks, and compare their performance to prior work. We observe that our techniques outperform the prior approach by a significant margin (up to 50%).
Near-term quantum computers can hold only a small number of qubits. One way to facilitate large-scale quantum computations is through a distributed network of quantum computers. In this work, we consider the problem of distributing quantum programs represented as quantum circuits across a quantum network of heterogeneous quantum computers, in a way that minimizes the overall communication cost required to execute the distributed circuit. We consider two ways of communicating: cat-entanglement that creates linked copies of qubits across pairs of computers, and teleportation. The heterogeneous computers impose constraints on cat-entanglement and teleportation operations that can be chosen by an algorithm. We first focus on a special case that only allows cat-entanglements and not teleportations for communication. We provide a two-step heuristic for solving this specialized setting: (i) finding an assignment of qubits to computers using Tabu search, and (ii) using an iterative greedy algorithm designed for a constrained version of the set cover problem to determine cat-entanglement operations required to execute gates locally. For the general case, which allows both forms of communication, we propose two algorithms that subdivide the quantum circuit into several portions and apply the heuristic for the specialized setting on each portion. Teleportations are then used to stitch together the solutions for each portion. Finally, we simulate our algorithms on a wide range of randomly generated quantum networks and circuits, and study the properties of their results with respect to several varying parameters.
Present quantum computers are constrained by limited qubit capacity and restricted physical connectivity, leading to challenges in large-scale quantum computations. Distributing quantum computations across a network of quantum computers is a promising way to circumvent these challenges and facilitate large quantum computations. However, distributed quantum computations require entanglements (to execute remote gates) which can incur significant generation latency and, thus, lead to decoherence of qubits. In this work, we consider the problem of distributing quantum circuits across a quantum network to minimize the execution time. The problem entails mapping the circuit qubits to network memories, including within each computer since limited connectivity within computers can affect the circuit execution time. We provide two-step solutions for the above problem: In the first step, we allocate qubits to memories to minimize the estimated execution time; for this step, we design an efficient algorithm based on an approximation algorithm for the max-quadratic-assignment problem. In the second step, we determine an efficient execution scheme, including generating required entanglements with minimum latency under the network re-source and decoherence constraints; for this step, we develop two algorithms with appropriate performance guarantees under certain settings or assumptions. We consider multiple protocols for executing remote gates, viz., telegates and cat-entanglements. With extensive simulations over NetSquid, a quantum network simulator, we demonstrate the effectiveness of our developed techniques and show that they outperform a scheme based on prior work by up to 95%.
Distributing quantum circuits across a network of quantum devices is a recent approach to improve the scalability of quantum computation. Entangled pairs of qubits distributed across network nodes are used as a communication resource for executing inter-node (remote) gates. However, establishing these entanglement pairs incurs significant latency, and doing so during the circuit's execution may lead to the decoherence of logical qubits. Instead, it may be beneficial to distribute certain entanglement pairs before the circuit is executed. Thus, we consider the problem of distributing a quantum circuit across a quantum network containing some pre-distributed entanglement pairs and seek to minimize the execution time of the circuit.
We address this problem in three steps. First, given the quantum network and (optionally) a probability distribution over training circuits, we determine a set of pre-distributed entanglement pairs under a specified budget. Second, we compute a qubit-to-memory allocation that minimizes the expected execution time given these pre-distributed resources. Finally, we identify any additional entanglement pairs required during execution, generate them concurrently, and execute the circuit gates. We evaluate our methods on a broad range of benchmark circuits.
Present quantum computers are constrained by limited qubit capacity and restricted physical connectivity, leading to challenges in large-scale quantum computations. Distributing quantum computations across a network of quantum computers is a promising way to circumvent these challenges and facilitate large quantum computations. However, distributed quantum computations require entanglements (to execute remote gates) which can incur significant generation latency and, thus, lead to decoherence of qubits. In this work, we consider the problem of distributing quantum circuits across a quantum network to minimize the execution time. The problem entails mapping the circuit qubits to network memories, including within each computer since limited connectivity within computers can affect the circuit execution time. We provide two-step solutions for the above problem: In the first step, we allocate qubits to memories to minimize the estimated execution time; for this step, we design an efficient algorithm based on an approximation algorithm for the max-quadratic-assignment problem. In the second step, we determine an efficient execution scheme, including generating required entanglements with minimum latency under the network resource and decoherence constraints; for this step, we develop two algorithms with appropriate performance guarantees under certain settings or assumptions. We consider multiple protocols for executing remote gates, viz., telegates and cat-entanglements. With extensive simulations over NetSquid, a quantum network simulator, we demonstrate the effectiveness of our developed techniques and show that they outperform a scheme based on prior work by up to 95%.
By connecting multiple quantum computers (QCs) through classical and quantum channels, a quantum communication network can be formed. This gives rise to new applications such as blind quantum computing, distributed quantum computing, and quantum key distribution. In distributed quantum computing, QCs collectively perform a quantum computation. As each device only executes a sub-circuit with fewer qubits than required by the complete circuit, a number of small QCs can be used in combination to execute a large quantum circuit that a single QC could not solve on its own. However, communication between QCs may still occur. Depending on the connectivity of the circuit, qubits must be teleported to different QCs in the network, adding overhead to the actual computation; thus, it is crucial to minimize the number of teleportations. In this paper, we propose an evolutionary algorithm for this problem. More specifically, the algorithm assigns qubits to QCs in the network for each time step of the circuit such that the overall teleportation cost is minimized. Moreover, network-specific constraints such as the capacity of each QC in the network can be taken into account. We run experiments on random as well as benchmarking circuits and give an outline on how this method can be adjusted to be incorporated into more realistic network settings as well as in compilers for distributed quantum computing. Our results show that an evolutionary algorithm is well suited for this problem when compared to the graph partitioning approach as it delivers better results while simultaneously allows the easy integration and consideration of various problem-specific constraints.
Present quantum computers are constrained by limited qubit capacity and restricted physical connectivity, leading to challenges in large-scale quantum computations. Distributing quantum computations across a network of quantum computers is a promising way to circumvent these challenges and facilitate large quantum computations. However, distributed quantum computations require entanglements (to execute remote gates) which can incur significant generation latency and, thus, lead to decoherence of qubits. In this work, we consider the problem of distributing quantum circuits across a quantum network to minimize the execution time. The problem entails mapping the circuit qubits to network memories, including within each computer since limited connectivity within computers can affect the circuit execution time. We provide two-step solutions for the above problem: In the first step, we allocate qubits to memories to minimize the estimated execution time; for this step, we design an efficient algorithm based on an approximation algorithm for the max-quadratic-assignment problem. In the second step, we determine an efficient execution scheme, including generating required entanglements with minimum latency under the network resource and decoherence constraints; for this step, we develop two algorithms with appropriate performance guarantees under certain settings or assumptions. We consider multiple protocols for executing remote gates, viz., telegates and cat-entanglements. With extensive simulations over NetSquid, a quantum network simulator, we demonstrate the effectiveness of our developed techniques and show that they outperform a scheme based on prior work by 40 to 50% on average and up to 95% in some cases.