Fast, high-fidelity operations between microwave resonators are an important tool for bosonic quantum computation and simulation with superconducting circuits. An attractive approach for implementing these operations is to couple these resonators via a nonlinear converter and actuate parametric processes with RF drives. It can be challenging to make these processes simultaneously fast and high fidelity, since this requires introducing strong drives without activating parasitic processes or introducing additional decoherence channels. We show that in addition to a careful management of drive frequencies and the spectrum of environmental noise, leveraging the inbuilt symmetries of the converter Hamiltonian can suppress unwanted nonlinear interactions, preventing converter-induced decoherence. We demonstrate these principles using a differentially-driven DC-SQUID as our converter, coupled to two high-Q microwave cavities. Using this architecture, we engineer a highly-coherent beamsplitter and fast (~100 ns) swaps between the cavities, limited primarily by their intrinsic single-photon loss. We characterize this beamsplitter in the cavities' joint single-photon subspace, and show that we can detect and post-select photon loss events to achieve a beamsplitter gate fidelity exceeding 99.98%, which to our knowledge far surpasses the current state of the art.
Fast, high-fidelity operations between microwave resonators are an important tool for bosonic quantum computation and simulation with superconducting circuits. An attractive approach for implementing these operations is to couple these resonators via a nonlinear converter and actuate parametric processes with RF drives. It can be challenging to make these processes simultaneously fast and high fidelity, since this requires introducing strong drives without activating parasitic processes or introducing additional decoherence channels. We show that in addition to a careful management of drive frequencies and the spectrum of environmental noise, leveraging the inbuilt symmetries of the converter Hamiltonian can suppress unwanted nonlinear interactions, preventing converter-induced decoherence. We demonstrate these principles using a differentially-driven DC-SQUID as our converter, coupled to two high-Q microwave cavities. Using this architecture, we engineer a highly-coherent beamsplitter and fast (~100 ns) swaps between the cavities, limited primarily by their intrinsic single-photon loss. We characterize this beamsplitter in the cavities' joint single-photon subspace, and show that we can detect and post-select photon loss events to achieve a beamsplitter gate fidelity exceeding 99.98%, which to our knowledge far surpasses the current state of the art.
Encoding a qubit in a high quality superconducting microwave cavity offers the opportunity to perform the first layer of error correction in a single device, but presents a challenge: how can quantum oscillators be controlled while introducing a minimal number of additional error channels? We focus on the two-qubit portion of this control problem by using a 3-wave mixing coupling element to engineer a programmable beamsplitter interaction between two bosonic modes separated by more than an octave in frequency, without introducing major additional sources of decoherence. Combining this with single-oscillator control provided by a dispersively coupled transmon provides a framework for quantum control of multiple encoded qubits. The beamsplitter interaction gbs is fast relative to the timescale of oscillator decoherence, enabling over 103 beamsplitter operations per coherence time, and approaching the typical rate of the dispersive coupling χ used for individual oscillator control. Further, the programmable coupling is engineered without adding unwanted interactions between the oscillators, as evidenced by the high on-off ratio of the operations, which can exceed 105. We then introduce a new protocol to realize a hybrid controlled-SWAP operation in the regime gbs≈χ, in which a transmon provides the control bit for the SWAP of two bosonic modes. Finally, we use this gate in a SWAP test to project a pair of bosonic qubits into a Bell state with measurement-corrected fidelity of 95.5%±0.2%.
The rich dynamics and large Hilbert space of quantum harmonic oscillators make them natural candidates for hardware-efficient and error-correctable quantum information processing. However, implementing direct entangling operations between oscillators remains an outstanding challenge. Existing strategies typically rely on parametrically activating interactions that populate the excited states of a nonlinear element, which introduces additional dissipation channels and potential leakage from the encoded manifold. Here, we engineer a Raman-assisted cross-Kerr interaction between microwave photons hosted in two superconducting cavities. Crucially, this dynamics does not excite the mediating nonlinear coupler, thereby suppressing coupler induced decoherence and leakage out of the bosonic code space. We use this direct nonlinear coupling to implement a controlled-phase gate within the single- and two-photon subspaces of two oscillators, deterministically generating entanglement between them. Finally, we use these engineered dynamics to implement a photon-number parity check on a storage cavity via purely bosonic interactions with an ancillary cavity, demonstrating an enhancement in the storage lifetime. Our work provides a promising pathway toward engineering robust operations that act entirely within a protected bosonic code space and realizing fault-tolerant quantum information processing with bosonic elements.
Quantum computing is a relatively new computing paradigm that leverages entanglement to implement algorithms beyond the reach of classical hardware. Superconducting quantum circuits have emerged as a platform to build quantum processors, with demonstrations of quantum supremacy over classical supercomputers and quantum error correction beyond fault tolerance. However, current noisy devices require significant improvements to unlock the full potential of quantum algorithms.This thesis investigates intrinsic noise channels in superconducting circuits and the design of noise-resilient qubits. By characterizing high-quality superconducting resonators, we identify lossy dielectric materials at the interfaces as the dominant loss mechanism, which we mitigate via targeted surface treatments. Subsequently, we leverage Josephson junction nonlinearity to engineer noise-biased qubits utilizing the Kerr parametric oscillator (KPO). By analyzing the efficiency of strong, far-off-resonance driving to facilitate three- and four-wave mixing processes, we demonstrate high-fidelity operations on Fock, Kerr-cat, and dual-rail qubits. For the Kerr-cat qubit, we introduce a novel 2D architecture that enables strong light-matter coupling with suppressed Purcell decay, yielding millisecond-scale bit-flip lifetimes. Within this same architecture, we demonstrate a longitudinal qubit readout with a 99.6% quantum nondemolition score, alongside a high-fidelity universal single-qubit gate set, all while maintaining bit-flip error suppression. Finally, we exploit the efficient wave-mixing of strongly coupled, far-detuned KPOs to realize a dynamically protected dual-rail qubit exhibiting both erasure bias and high-fidelity single-qubit gates.
Quantum computing with superconducting circuits relies on high-fidelity driven nonlinear processes. An ideal quantum nonlinearity would selectively activate desired coherent processes at high strength, without activating parasitic mixing products or introducing additional decoherence. The wide bandwidth of the Josephson nonlinearity makes this difficult, with undesired drive-induced transitions and decoherence limiting qubit readout, gates, couplers, and amplifiers. Significant strides have recently been made into building better “quantum mixers,” with promise being shown by Kerr-free three-wave mixers that suppress driven frequency shifts, and balanced quantum mixers that explicitly forbid a significant fraction of parasitic processes. We propose a novel mixer that combines both these strengths, with engineered selection rules that make it essentially linear (not just Kerr-free) when idle, and activate clean parametric processes even when driven at high strength. Furthermore, its ideal Hamiltonian is simple to analyze analytically, and we show that this ideal behavior is first-order insensitive to dominant experimental imperfections. We expect this mixer to allow significant advances in high- Q control, readout, and amplification.
Abstract The rich dynamics and large Hilbert space of quantum harmonic oscillators make them natural candidates for hardware-efficient and error-correctable quantum information processing. However, implementing direct entangling operations between oscillators remains an outstanding challenge. Existing strategies typically rely on parametrically activating interactions that necessarily populate the excited states of a nonlinear coupler, introducing additional dissipation channels and potential leakage outside the encoded manifold. Here, we present a fundamentally different approach to generate nonlinear coupling between bosonic modes: a Raman-assisted cross-Kerr interaction between microwave photons hosted in two superconducting cavities, which does not populate the mediating coupler. Crucially, this dynamics preserves the bosonic code space throughout, which is essential for fault-tolerant bosonic quantum computation. We demonstrate that the engineered cross-Kerr can be used to directly implement controlled-phase gates between two oscillators encoded in the single- and two-photon subspaces. Further, we apply the engineered dynamics to implement code-space-preserving parity checks using one of the oscillators as an ancillary mode, demonstrating an all-bosonic syndrome extraction that extends the effective lifetime of a storage oscillator. This work establishes a qualitatively different strategy for bosonic control, providing a pathway toward fault-tolerant quantum information processing with purely bosonic gates and syndrome measurements.
To scale superconducting quantum processors, it is essential to achieve long coherence times while engineering interactions that do not introduce additional decoherence channels. In superconducting qubit systems, this can be realized using multimode circuits that feature a protected qubit mode alongside a distinct mediator mode. Building on this concept, our recently developed P-mon qubit provides intrinsic protection against decoherence from the readout environment. We extend this approach to controlled two-qubit interactions, by exploiting the mediator modes of P-mons for on-demand coupling. Because direct interactions between the qubit modes are strongly suppressed, unwanted ZZ-type interactions are significantly reduced to below 3.6(5)kHz in the idle state. When tuning the coupled mediator modes on resonance, the cross-Kerr interaction between the qubit and the hybridized mediator modes leads to a qubit-state dependent frequency shift. By selectively addressing these transitions, we implement a 180ns long CZ gate and determine a fidelity of $99.62(4)~\text{%}$. These results represent a significant step toward a scalable superconducting architecture that maintains high performance at scale.