The fidelity of quantum operations is often limited by incoherent errors, which typically can be modeled by fundamental Markovian noise processes such as amplitude damping and dephasing. In Phys. Rev. Lett. 129, 150504 (2022), we presented an analytical result for the average gate fidelity of a general multiqubit operation in terms of the dissipative rates and the corresponding Lindblad jump operators, provided that the operation remains in the computational subspace throughout the time evolution. Here we generalize this expression for the average gate fidelity to include the cases where the system state temporarily leaves the computational subspace during the gate. Such gate mechanisms are integral to several quantum-computing platforms, and our formula is applicable to all of them; as examples, we employ it for the two-qubit controlled-Z gate in both superconducting qubits and neutral atoms. We also obtain the average gate fidelity for simultaneous operations applied in multiqubit systems. These results are useful for understanding the error budgets of quantum gates while scaling up quantum computers.
The fidelity of quantum operations is often limited by incoherent errors, which typically can be modeled by fundamental Markovian noise processes such as amplitude damping and dephasing. In Phys. Rev. Lett. 129, 150504 (2022), we presented an analytical result for the average gate fidelity of a general multiqubit operation in terms of the dissipative rates and the corresponding Lindblad jump operators, provided that the operation remains in the computational subspace throughout the time evolution. Here we generalize this expression for the average gate fidelity to include the cases where the system state temporarily leaves the computational subspace during the gate. Such gate mechanisms are integral to several quantum-computing platforms, and our formula is applicable to all of them; as examples, we employ it for the two-qubit controlled-Z gate in both superconducting qubits and neutral atoms. We also obtain the average gate fidelity for simultaneous operations applied in multiqubit systems. These results are useful for understanding the error budgets of quantum gates while scaling up quantum computers.
As quantum-computing platforms are susceptible to noise, the fidelity of quantum operations is limited by decoherence. Understanding this limitation is crucial for building utility-scale quantum processors. In previous works [Phys. Rev. Lett. 129, 150504 (2022); Quantum 9, 1684 (2025)], we presented analytical formulae for the average gate fidelity of multi-qubit operations under static Markovian noise processes, including operations that temporarily leave the computational subspace. However, some quantum-computing architectures dynamically modulate qubit or coupler frequencies to implement two-qubit gates, e.g., baseband flux gates; such modulation can lead to dissipation rates varying in time. In this Letter, we therefore generalize the fidelity-reduction formulae to encompass time-dependent dissipation. Applying our generalized formula, we obtain a fidelity bound for adiabatic operations and demonstrate that flux-dependent noise sensitivity, combined with qubit-coupler hybridization, significantly reduces the fidelity of adiabatic controlled-Z (CZ) gates in superconducting quantum computers. Our work thus provides essential theoretical tools for evaluating error budgets and optimizing the design of quantum operations in tunable quantum-computing architectures, and may also find applications in quantum-sensing and quantum-communication protocols that are affected by time-dependent dissipation.
Present-day quantum processors are open systems in which dissipation and decoherence degrade the information carried by a quantum state as it propagates through a circuit. We study this degradation in dissipative random quantum circuits, modeling each two-qubit gate as a diluted unitary that interpolates between the intended unitary operation and a random dissipative quantum channel. Using the fidelity between the ideal and noisy output states as a diagnostic, we show that sufficiently random unitary gates or dissipative Kraus operators lead to a universal decay of the average fidelity. This decay is determined only by the dissipation strength, system size, and circuit depth, while microscopic details of the gates and noise, including the Kraus rank, appear only in subleading corrections to higher moments. We derive a closed-form expression for the average fidelity in terms of three physically meaningful error parameters, dissipation strength, coherent two-qubit gate-error strength, and connectivity-error probability. Finally, we identify the cases when dissipative effects can be reproduced by an unitary-noise model and when dissipation-induced decoherence remains distinguishable from coherent noise at the level of the average fidelity.
Quantum computers are operated by external driving fields, such as lasers, microwaves, or transmission lines, that execute logical operations on multiqubit registers, leaving the system in a pure state. However, the drive and the logical system might become correlated in such a way that, after tracing out the degrees of freedom of the driving field, the output state will not be pure. Previous works have pointed out that the resulting error scales inversely with the energy of the drive, thus imposing a limit on the energy efficiency of quantum computing. In this study, focusing on the Jaynes-Cummings model, we show how the same scaling can be seen as a consequence of two competing phenomena: the entanglement-induced error, which grows with time, and a minimal time for computation imposed by quantum speed limits. This evidence is made possible by quantifying, at any time, the computation error via the spectral radius associated with the density operator of the logical qubit. Moreover, we also prove that, in order to attain a given target state at a chosen fidelity, it is energetically more efficient to perform a single driven evolution of the logical qubits rather than to split the computation in subroutines, each operated by a dedicated pulse. Published by the American Physical Society 2024
Markovian regime decoherence effects in quantum computers are studied in terms of the fidelity for the situation where the number of qubits N becomes large. A general expression giving the decoherence time scale in terms of Markovian relaxation elements and expectation values of products of system fluctuation operators is obtained, which could also be applied to study decoherence in other macroscopic systems such as Bose condensates and superconductors. A standard circuit model quantum computer involving three-state lambda system ionic qubits is considered, with qubits localized around well-separated positions via trapping potentials. The centre of mass vibrations of the qubits act as a reservoir. Coherent one and two qubit gating processes are controlled by time-dependent localized classical electromagnetic fields that address specific qubits, the two qubit gating processes being facilitated by a cavity mode ancilla, which permits state interchange between qubits. With a suitable choice of parameters, it is found that the decoherence time can be made essentially independent of N.
Accurate quantum computing relies on the precision of quantum gates. However, quantum gates in practice are generally affected by dissipative environments, which can significantly reduce their fidelity. In this paper, we elucidate the fundamental relations between the average fidelity of generic quantum gates and the dissipation that occurs during the computing processes. Considering scenarios in which a quantum gate is subject to Markovian environments, we rigorously derive fidelity-dissipation relations that hold for arbitrary operational times. Intriguingly, when the quantum gate undergoes thermal relaxation, the result can be used as a valuable tool for estimating dissipation through experimentally measurable fidelity, without requiring detailed knowledge of the dissipative structure. For the case of arbitrary environments, we uncover a trade-off relation between the average fidelity and energy dissipation, implying that these quantities cannot be large simultaneously. Our results unveil the computational limitations imposed by thermodynamics, shedding light on the profound connection between thermodynamics and quantum computing. Published by the American Physical Society 2024
We study the exact open system dynamics of one- and two-qubit gates during a measurement-based quantum computation considering non-Markovian environments. We obtain analytical solutions for the average gate fidelities and analyze them for amplitude damping and phase damping channels. We show, for both channels, that the average fidelity is identical for the X gate and Z gate and very similar for the $\ensuremath{\pi}/4$ gate when considering the amplitude damping channel. Also, we show that fast application of the projective measurements does not necessarily imply high gate fidelity nor does slow application necessarily imply low gate fidelity. Indeed, for highly non-Markovian environments, it is of utmost importance to know the best time to perform the measurements, since a huge variation in the gate fidelity may occur given this scenario. Furthermore, we show that whereas for amplitude damping the knowledge of the dissipative map is sufficient to determine the best measurement times, i.e., the best times at which measures are taken, the same is not necessarily true for phase damping. For the latter, the time of the set of measures becomes crucial since a phase error in one qubit can fix the phase error that takes place in another. Finally, we show that these peculiar results disappear if all qubits are subjected to Markovian processes.